Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : model derivation and validation

A multi-zone kinetic model coupled with a dynamic slag generation model was developed for the simulation of hot metal and slag composition during the BOF operation. The three reaction zones, (i) jet impact zone (ii) slag-bulk metal zone (iii) slag-metal-gas emulsion zone were considered for the calculation of overall refining kinetics. In the rate equations, the transient rate parameters were mathematically described as a function of process variables. A micro and macroscopic rate calculation methodology (micro-kinetics and macro-kinetics) were developed to estimate the total refining contributed by the recirculating metal droplets through the slag-metal emulsion zone. The micro-kinetics involves developing the rate equation for individual droplets in the emulsion. The mathematical models for the size distribution of initial droplets, kinetics of simultaneous refining of elements, the residence time in the emulsion, dynamic interfacial area change were established in the micro-kinetic model. In the macro-kinetics calculation, a droplet generation model was employed and the total amount of refining by emulsion was calculated by summing the refining from the entire population of returning droplets. A dynamic FetO generation model based on oxygen mass balance was developed and coupled with the multi-zone kinetic model. The effect of post combustion on the evolution of slag and metal composition was investigated. The model was applied to a 200-ton top blowing converter and the simulated value of metal and slag was found to be in good agreement with the measured data. The post-combustion ratio was found to be an important factor in controlling FetO content in the slag and the kinetics of Mn and P in a BOF process

Reduction of deuterium content in carbon targets for 12C+12C reaction studies of astrophysical interest

The 12C(12C,p)23Na and 12C(12C,$\alpha$)20Ne fusion reactions are among the most important in stellar evolution since they determine the destiny of massive ($M \simeq 8-10 M_{\odot}$) stars. However, experimental low-energy investigations of such reactions are significantly hampered by ubiquitous natural hydrogen and deuterium contaminants in the carbon targets. The associated beam-induced background completely masks the reaction products of interest thus preventing cross-section measurements at the relevant energies of astrophysical interest, $E_{\mathrm{cm}} < 2$ MeV. In this work, we report about an investigation aimed at assessing possible deuterium reductions on both natural graphite and Highly Ordered Pyrolytic Graphite targets as a function of target temperature. Our results indicate that reductions up to about 80% can be attained on both targets in the temperature range investigated, $T \simeq 200-1200 {}^{\circ}$C. A further reduction by a factor of 2.5 in absolute deuterium content is observed when the scattering chamber is surrounded by a dry nitrogen atmosphere so as to minimise light-particles uptake within the chamber rest gas (and thus on target) through air leaks. The results from this study will inform the choice of optimal experimental conditions and procedures for improved measurements of the 12C + 12C reactions cross-sections at the low energies of astrophysical interest

Helium burning and neutron sources in the stars

Helium burning represents an important stage of stellar evolution as it contributes to the synthesis of key elements such as carbon, through the triple-alfa process, and oxygen, through the 12C(alfa, gamma)16O reaction. It is the ratio of carbon to oxygen at the end of the helium burning stage that governs the following phases of stellar evolution leading to different scenarios depending on the initial stellar mass. In addition, helium burning in Asymptotic Giant Branch stars, provides the two main sources of neutrons, namely the 13C(alfa, n)16O and the 22Ne(alfa, n)25Mg, for the synthesis of about half of all elements heavier than iron through the s-process. Given the importance of these reactions, much experimental work has been devoted to the study of their reaction rates over the last few decades. However, large uncertainties still remain at the energies of astrophysical interest which greatly limit the accuracy of stellar models predictions. Here, we review the current status on the latest experimental efforts and show how measurements of these important reaction cross sections can be significantly improved at next-generation deep underground laboratories