Anisotropic acoustical properties of sintered fibrous metals

A combined theoretical and experimental study is carried out to investigate the anisotropic acoustic properties of sintered fibrous metals. In the theoretical model, based on the transversal and longitudinal dynamic mass densities and effective bulk modulus of randomly placed parallel fibers, the dynamic mass densities and effective dynamic bulk modulus of a sintered fibrous metal in the direction normal and parallel to its surface are obtained. Sound absorption coefficient, sound speed and attenuation coefficient in each of the two directions are calculated once the dynamic mass densities and effective dynamic bulk modulus are determined. For validation, experimental measurements are performed, with good agreement between theoretical prediction and measurement data achieved. Subsequent numerical investigations focus on the influence of fiber diameter and porosity on the anisotropic acoustical properties of the sintered fibrous metal. The sintered fibrous metal exhibits better sound absorption/attenuation performance in the parallel direction than in the normal direction. The anisotropy in acoustical properties increases with decreasing fiber diameter and porosity due mainly to increasing interactions between adjacent fibers

Model for tumour growth with treatment by continuous and pulsed chemotherapy

Peer reviewedPreprin

Higgs-Boson Production Associated with a Single Bottom Quark in Supersymmetric QCD

Due to the enhancement of the couplings between Higgs boson and bottom quarks in the minimal sypersymmetric standard model (MSSM), the cross section of the process pp(p\bar{p}) \to h^0b(h^0\bar{b})+X at hadron colliders can be considerably enhanced. We investigated the production of Higgs boson associated with a single high-p_T bottom quark via subprocess bg(\bar{b}g) \to h^0b(h^0\bar{b}) at hadron colliders including the next-to-leading order (NLO) QCD corrections in MSSM. We find that the NLO QCD correction in the MSSM reaches 50%-70% at the LHC and 60%-85% at the Fermilab Tevatron in our chosen parameter space.Comment: accepted by Phys. Rev.

Influence of confinement on the orientational phase transitions in the lamellar phase of a block copolymer melt under shear flow

In this work we incorporate some real-system effects into the theory of orientational phase transitions under shear flow (M. E. Cates and S. T. Milner, Phys. Rev. Lett. v.62, p.1856 (1989) and G. H. Fredrickson, J. Rheol. v.38, p.1045 (1994)). In particular, we study the influence of the shear-cell boundaries on the orientation of the lamellar phase. We predict that at low shear rates the parallel orientation appears to be stable. We show that there is a critical value of the shear rate at which the parallel orientation loses its stability and the perpendicular one appears immediately below the spinodal. We associate this transition with a crossover from the fluctuation to the mean-field behaviour. At lower temperatures the stability of the parallel orientation is restored. We find that the region of stability of the perpendicular orientation rapidly decreases as shear rate increases. This behaviour might be misinterpreted as an additional perpendicular to parallel transition recently discussed in literature.Comment: 25 pages, 4 figures, submitted to Phys. Rev.

Search for the Rare Decays J/Psi --> Ds- e+ nu_e, J/Psi --> D- e+ nu_e, and J/Psi --> D0bar e+ e-

We report on a search for the decays J/Psi --> Ds- e+ nu_e + c.c., J/Psi --> D- e+ nu_e + c.c., and J/Psi --> D0bar e+ e- + c.c. in a sample of 5.8 * 10^7 J/Psi events collected with the BESII detector at the BEPC. No excess of signal above background is observed, and 90% confidence level upper limits on the branching fractions are set: B(J/Psi --> Ds- e+ nu_e + c.c.)<4.8*10^-5, B(J/Psi --> D- e+ nu_e + c.c.) D0bar e+ e- + c.c.)<1.1*10^-5Comment: 10 pages, 4 figure

Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

Study of J/psi decays to Lambda Lambdabar and Sigma0 Sigma0bar

The branching ratios and Angular distributions for J/psi decays to Lambda Lambdabar and Sigma0 Sigma0bar are measured using BESII 58 million J/psi.Comment: 11 pages, 5 figure

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

BESII Detector Simulation

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM