Calculations of turbulent separated flows

A numerical study of incompressible turbulent separated flows is carried out by using two-equation turbulence models of the K-epsilon type. On the basis of realizability analysis, a new formulation of the eddy-viscosity is proposed which ensures the positiveness of turbulent normal stresses - a realizability condition that most existing two-equation turbulence models are unable to satisfy. The present model is applied to calculate two backward-facing step flows. Calculations with the standard K-epsilon model and a recently developed RNG-based K-epsilon model are also made for comparison. The calculations are performed with a finite-volume method. A second-order accurate differencing scheme and sufficiently fine grids are used to ensure the numerical accuracy of solutions. The calculated results are compared with the experimental data for both mean and turbulent quantities. The comparison shows that the present model performs quite well for separated flows

Reynolds stress models of homogeneous turbulence

Existing and new models for the rapid and the return terms in the Reynolds stress equations were tested in two ways. One, by direct comparison of the model with simulation data. The other, by simulating the flows using the models and comparing the predicted Reynolds stresses with the data. It was found that existing linear models can be improved and that nonlinear models are in better agreement with the simulation data for a wide variety of flows

A two-dimensional numerical study of the flow inside the combustion chambers of a motored rotary engine

A numerical study was performed to investigate the unsteady, multidimensional flow inside the combustion chambers of an idealized, two-dimensional, rotary engine under motored conditions. The numerical study was based on the time-dependent, two-dimensional, density-weighted, ensemble-averaged conservation equations of mass, species, momentum, and total energy valid for two-component ideal gas mixtures. The ensemble-averaged conservation equations were closed by a K-epsilon model of turbulence. This K-epsilon model of turbulence was modified to account for some of the effects of compressibility, streamline curvature, low-Reynolds number, and preferential stress dissipation. Numerical solutions to the conservation equations were obtained by the highly efficient implicit-factored method of Beam and Warming. The grid system needed to obtain solutions were generated by an algebraic grid generation technique based on transfinite interpolation. Results of the numerical study are presented in graphical form illustrating the flow patterns during intake, compression, gaseous fuel injection, expansion, and exhaust

Quantum interference by two temporally distinguishable pulses

We report a two-photon interference effect, in which the entangled photon pairs are generated from two laser pulses well-separated in time. In a single pump pulse case, interference effects did not occur in our experimental scheme. However, by introducing a second pump pulse delayed in time, quantum interference was then observed. The visibility of the interference fringes shows dependence on the delay time between two laser pulses. The results are explained in terms of indistinguishability of biphoton amplitudes which originated from two temporally separated laser pulses.Comment: two-column, 4pages, submitted to PRA, minor change

New high-efficiency source of photon pairs for engineering quantum entanglement

We have constructed an efficient source of photon pairs using a waveguide-type nonlinear device and performed a two-photon interference experiment with an unbalanced Michelson interferometer. Parametric down-converted photons from the nonlinear device are detected by two detectors located at the output ports of the interferometer. Because the interferometer is constructed with two optical paths of different length, photons from the shorter path arrive at the detector earlier than those from the longer path. We find that the difference of arrival time and the time window of the coincidence counter are important parameters which determine the boundary between the classical and quantum regime. When the time window of the coincidence counter is smaller than the arrival time difference, fringes of high visibility (80$\pm$ 10%) were observed. This result is only explained by quantum theory and is clear evidence for quantum entanglement of the interferometer's optical paths.Comment: 4 pages, 4 figures, IQEC200

GEMINI: A Generic Multi-Modal Natural Interface Framework for Videogames

In recent years videogame companies have recognized the role of player engagement as a major factor in user experience and enjoyment. This encouraged a greater investment in new types of game controllers such as the WiiMote, Rock Band instruments and the Kinect. However, the native software of these controllers was not originally designed to be used in other game applications. This work addresses this issue by building a middleware framework, which maps body poses or voice commands to actions in any game. This not only warrants a more natural and customized user-experience but it also defines an interoperable virtual controller. In this version of the framework, body poses and voice commands are respectively recognized through the Kinect's built-in cameras and microphones. The acquired data is then translated into the native interaction scheme in real time using a lightweight method based on spatial restrictions. The system is also prepared to use Nintendo's Wiimote as an auxiliary and unobtrusive gamepad for physically or verbally impractical commands. System validation was performed by analyzing the performance of certain tasks and examining user reports. Both confirmed this approach as a practical and alluring alternative to the game's native interaction scheme. In sum, this framework provides a game-controlling tool that is totally customizable and very flexible, thus expanding the market of game consumers.Comment: WorldCIST'13 Internacional Conferenc

Time-bin entangled photon holes

The general concept of entangled photon holes is based on a correlated absence of photon pairs in an otherwise constant optical background. Here we consider the specialized case when this background is confined to two well-defined time bins, which allows the formation of time-bin entangled photon holes. We show that when the typical coherent state background is replaced by a true single-photon (Fock state) background, the basic time-bin entangled photon-hole state becomes equivalent to one of the time-bin entangled photon-pair states. We experimentally demonstrate these ideas using a parametric down-conversion photon-pair source, linear optics, and post-selection to violate a Bell inequality with time-bin entangled photon holes.Comment: 6 pages, 5 figure

Decision Analysis on Water Resources Planning and Management for an Arid Metropolitan Center in West Texas

The demand by consumers for public-owned low-priced natural resources is essentially insatiable. When natural resources become scarce the public is agonized by the problem of making an optimum choice or choices from feasible alternatives, preferably from a large number of feasible alternatives. In order to determine the best solutions in terms of satisfying constrained requirements, systematic procedures must be adopted for resources planning and management processes. The Need for a Comprehensive Systems Approach to Urban Water Resources Planning In the past, management and planning programs for water resources have been based primarily on one attribute--money. Sharp criticism has been directed to this type of single-minded planning approach as exemplified in the following speech by Senator Stephen Youngs[38], For a large segment of our water resources program, both the Executive Branch and Congress now scrutinize each project as though it were a narrow commercial undertaking. We concentrate attention on those direct prospective benefits which are strictly measurable in dollars and cents such as the dollar value of property saved from floods, or the amount by which river navigation saves freight charges. We then compare these narrowly construed monetary benefits to cost. In almost every instance, the benefits, human and social values, and vital objectives of national policy which cannot be measured in direct monetary terms often receive only supplementary attention, or none at all. It has become the policy, as stated by Clayton[11], of the National Water Commission, that water resource projects should not be evaluated merely on a pure benefit-cost ratio, but that intangible benefits should also be considered. This prevailing attitude has catalyzed the application of decision analysis embedded with multiattribute characteristics for water resources development decision-making procedures. Decision analysis is a systematic solution procedure which can be used to crystalize a complicated decision problem into manageable subproblems by ranking the decision alternatives in accordance with cardinal values attached to their consequences based on the principles outlines in utility theory. Recent advances in multiattribute utility theory allow the decision maker to assess utilities over intangible benefits such as social acceptance or recreation potential. The relative importance of both intangible and tangible benefits such as cost or quality will all be weighted accordingly in the total utility evaluation. In this manner, the intangible benefits will receive due consideration in the final decision making process

GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 2: User's manual and program listing

An efficient computer program, called GRID2D/3D, was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. The theory and method used in GRID2D/3D is described