Engineering the side facets of vertical [100] oriented InP nanowires for novel radial heterostructures

In addition to being grown on industry-standard orientation, vertical [100] oriented nanowires present novel families of facets and related cross-sectional shapes. These nanowires are engineered to achieve a number of facet combinations and cross-sectional shapes, by varying their growth parameters within ranges that facilitate vertical growth. In situ post-growth annealing technique is used to realise other combinations that are unattainable solely using growth parameters. Two examples of possible novel radial heterostructures grown on these vertical [100] oriented nanowire facets are presented, demonstrating their potential in future applications

Electrical isolation of n-type and p-type InP layers by proton bombardment

The evolution of the sheet resistance(Rs) of n-type and p-type conductive InP layers during proton irradiation and the stability of the formed isolation during postirradiation annealing were investigated. It was found that the threshold dose (Dth) to convert the conductive layer to a highly resistive one is different for n- and p-type samples with similar initial free carrier concentrations. From our results, one infers that the antisite defects and/or related defect complexes formed by the replacement collisions are the carrier trapping centers, where InP is responsible for electron trapping and PIn for the hole trapping. A time dependence of the Rs was observed after each irradiation step to doses of ≅Dth and higher. This time variation is related to metastable processes involving free carriers. The thermal stability of the isolation of n-type samples is limited to temperatures lower than 200 °C, irrespectively of the irradiated dose. For p-type samples the thermal stability of electrical isolation is extended to 450–500 °C.This work was partly supported by Conselho Nacional de Pesquisas (CNPq, Brazil) under Contract No. 200541/ 99-4

Dynamics and control of gold-encapped gallium arsenide nanowires imaged by 4D electron microscopy

Eutectic related reaction is a special chemical/physical reaction involving multiple phases, solid and liquid. Visualization of phase reaction of composite nanomaterials with high spatial and temporal resolution provides a key understanding of alloy growth with important industrial applications. However, it has been a rather challenging task. Here we report the direct imaging and control of the phase reaction dynamics of a single, as-grown free-standing gallium arsenide nanowire encapped with a gold nanoparticle, free from environmental confinement or disturbance, using four-dimensional electron microscopy. The non-destructive preparation of as-grown free-standing nanowires without supporting films allows us to study their anisotropic properties in their native environment with better statistical character. A laser heating pulse initiates the eutectic related reaction at a temperature much lower than the melting points of the composite materials, followed by a precisely time-delayed electron pulse to visualize the irreversible transient states of nucleation, growth and solidification of the complex. Combined with theoretical modeling, useful thermodynamic parameters of the newly formed alloy phases and their crystal structures could be determined. This technique of dynamical control and 4D imaging of phase reaction processes on the nanometer-ultrafast time scale open new venues for engineering various reactions in a wide variety of other systems

Evolution of InAs branches in InAs/GaAs nanowire heterostructures

Branched nanowireheterostructures of InAs∕GaAs were observed during Au-assisted growth of InAs on GaAsnanowires. The evolution of these branches has been determined through detailed electron microscopy characterization with the following sequence: (1) in the initial stage of InAsgrowth, the Au droplet is observed to slide down the side of the GaAsnanowire, (2) the downward movement of Aunanoparticle later terminates when the nanoparticle encounters InAsgrowing radially on the GaAsnanowire sidewalls, and (3) with further supply of In and As vapor reactants, the Aunanoparticles assist the formation of InAs branches with a well-defined orientation relationship with GaAs∕InAs core/shell stems. We anticipate that these observations advance the understanding of the kink formation in axial nanowireheterostructures.The Australian Research Council is acknowledged for the financial support of this project. One of the authors M.P. acknowledges the support of an International Postgraduate Research Scholarship

Ultrafast trapping times in ion implanted InP

As⁺ and P⁺implantation was performed on semi-insulating (SI) and p-type InP samples for the purpose of creating a material suitable for ultrafast optoelectronic applications. SI InP samples were implanted with a dose of 1×10¹⁶ cm⁻² and p-type InP was implanted with doses between 1×10¹² and 1×10¹⁶ cm⁻². Subsequently, rapid thermal annealing at temperatures between 400 and 700 °C was performed for 30 sec. Hall-effect measurements, double-crystal x-ray diffraction, and time-resolved femtosecond differential reflectivity showed that, for the highest-annealing temperatures, the implanted SI InP samples exhibited high mobility, low resistivity, short response times, and minimal structural damage. Similar measurements on implantedp-type InP showed that the fast response time, high mobility, and good structural recovery could be retained while increasing the resistivity

Characterization of deep level traps responsible for isolation of proton implanted GaAs

Deep level transient spectroscopy was employed to determine the electrical properties of defects induced in metalorganic chemical-vapor deposition grown n-type and p-type GaAs during proton bombardment. Thermal stability of these defects was investigated and correlation with defects responsible for isolation of GaAs by ion bombardment was discussed. The annealing temperature region (220–250 °C) is similar to proton isolated GaAs below the threshold dose for complete isolation. At least four of the five traps observed in n-type GaAs are not simple interstitial-vacancy pairs. For p-type GaAs we have observed an unknown level with apparent energy of ~0.64 eV

A study of quantum well solar cell structures with bound-to-continuum transitions for reduced carrier recombination

A bound-to-continuum quantum well solar cell structure is proposed, and the band structure and absorption spectra are analyzed by the use of an eight band k⋅p model. The structure is based on quantum wells that only support bound states for the valence band. The absence of bound conduction band states has a number of potential advantages, including a reduction of electron trapping and, therefore, a reduction of quantum well induced photocarrier recombination due to reduced spatial overlap of the electron and hole wavefunctions.Thanks are due to the Australian Research Council for the financial support of this research

Novel nanoscale transfer printing technique for precise positioning of nanowire lasers

Semiconductor nanowires, with lasing emission at room temperature, can be transferred in a controlled way to specific locations on diverse substrates and organized into bespoke spatial patterns

Strain relaxation and phonon confinement in self-assembled InAsSb/InP (001) quantum dashes: Effect of deposition thickness and composition

This paper presents a study on the strain relaxation and phonon confinement effect in InAsSb/InP quantum dashes QDashes. The phonon mode with a frequency between that of InAs-like longitudinal optical mode and that of InP transverse optical mode is determined to be originated from InAsSb QDashes. Despite the small height of the QDashes, their phonon frequency is found to be mainly determined by the strain relaxation in the dashes. With increasing InAsSb deposition thickness and Sb composition in InAsSb dashes, the phonon mode shows an upward shift of its frequency due to the increased compressive strain.Financial support from Australian Research Council DP0774366 is gratefully acknowledged

Structural characteristics of GaSb∕GaAs nanowire heterostructures grown by metal-organic chemical vapor deposition

Highly lattice mismatched (7.8%) GaAs∕GaSbnanowireheterostructures were grown by metal-organic chemical vapor deposition and their detailed structural characteristics were determined by electron microscopy. The facts that (i) no defects have been found in GaSb and its interfaces with GaAs and (ii) the lattice mismatch between GaSb∕GaAs was fully relaxed suggest that the growth of GaSbnanowires is purely governed by the thermodynamics. The authors believe that the low growth rate of GaSbnanowires leads to the equilibrium growth