10,299 research outputs found
Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers
Polymer solar cells have been spotlighted due to their potential for low-cost manufacturing but their efficiency is still less than required for commercial application as lightweight/flexible modules. Forming a dipole layer at the electron-collecting interface has been suggested as one of the more attractive approaches for efficiency enhancement. However, only a few dipole layer material types have been reported so far, including only one non-ionic (charge neutral) polymer. Here we show that a further neutral polymer, namely poly(2-ethyl-2-oxazoline) (PEOz) can be successfully used as a dipole layer. Inclusion of a PEOz layer, in particular with a nanodot morphology, increases the effective work function at the electron-collecting interface within inverted solar cells and thermal annealing of PEOz layer leads to a state-of-the-art 10.74% efficiency for single-stack bulk heterojunction blend structures comprising poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b′]dithiophene-alt-3-fluorothieno[3,4-b]thiophene-2-carboxylate] as donor and [6,6]-phenyl-C71-butyric acid methyl ester as acceptor
XMM-Newton Observations of NGC 507: Super-solar Metal Abundances in the Hot ISM
We present the results of the X-ray XMM-Newton observations of NGC 507, a
dominant elliptical galaxy in a small group of galaxies, and report
'super-solar' metal abundances of both Fe and a-elements in the hot ISM of this
galaxy. We find Z_Fe = 2-3 times solar inside the D25 ellipse of NGC 507. This
is the highest Z_Fe reported so far for the hot halo of an elliptical galaxy;
this high Iron abundance is fully consistent with the predictions of stellar
evolution models, which include the yield of both type II and Ia supernovae.
The spatially resolved, high quality XMM spectra provide enough statistics to
formally require at least three emission components: two soft thermal
components indicating a range of temperatures in the hot ISM, plus a harder
component, consistent with the integrated output of low mass X-ray binaries
(LMXBs). The abundance of a-elements (most accurately determined by Si) is also
found to be super-solar. The a-elements to Fe abundance ratio is close to the
solar ratio, suggesting that ~70% of the Iron mass in the hot ISM was
originated from SNe Type Ia. The a-element to Fe abundance ratio remains
constant out to at least 100 kpc, indicating that SNe Type II and Ia ejecta are
well mixed in a scale much larger than the extent of the stellar body.Comment: 29 pages, 6 figures, Accepted in ApJ (v613, Oct. 1, 2004); Minor
revisions after referee's comments; A high-resolution pdf file available at
http://hea-www.harvard.edu/~kim/pap/N507_XMM.pd
Ventricular assist device implantation in the elderly
BACKGROUND:
Dramatic advances in ventricular assist device (VAD) design and patient management have made mechanical circulatory support an attractive therapeutic option for the growing pool of elderly heart failure patients.
METHODS:
A literature review of all relevant studies was performed. No time or language restrictions were imposed, and references of the selected studies were checked for additional relevant citations.
RESULTS:
In concordance with the universal trend in mechanical circulatory support, continuous flow devices appear to have particular benefits in the elderly. In addition, the literature suggests that early intervention before the development of cardiogenic shock, important in all patients, is particularly paramount in older patients.
CONCLUSIONS:
The ongoing refinement of patient selection, surgical technique, and post-operative care will continue to improve surgical outcomes, and absolute age may become a less pivotal criterion for mechanical circulatory support. However, clear guidelines for the use of mechanical circulatory support in the elderly remain undefined
Interplay between carrier and impurity concentrations in annealed GaMnAs intrinsic anomalous Hall Effect
Investigating the scaling behavior of annealed GaMnAs anomalous
Hall coefficients, we note a universal crossover regime where the scaling
behavior changes from quadratic to linear, attributed to the anomalous Hall
Effect intrinsic and extrinsic origins, respectively. Furthermore, measured
anomalous Hall conductivities when properly scaled by carrier concentration
remain constant, equal to theoretically predicated values, spanning nearly a
decade in conductivity as well as over 100 K in T. Both the qualitative
and quantitative agreement confirms the validity of new equations of motion
including the Berry phase contributions as well as tunablility of the intrinsic
anomalous Hall Effect.Comment: 4 pages, 5 figure
Evidence of metallic clustering in annealed Ga1-xMnxAs from atypical scaling behavior of the anomalous Hall coefficient
We report on the anomalous Hall coefficient and longitudinal resistivity
scaling relationships on a series of annealed Ga1-xMnxAs epilayers (x~0.055).
As-grown samples exhibit scaling parameter n of ~ 1. Near the optimal annealing
temperature, we find n ~ 2 to be consistent with recent theories on the
intrinsic origins of anomalous Hall Effect in Ga1-xMnxAs. For annealing
temperatures far above the optimum, we note n > 3, similar behavior to certain
inhomogeneous systems. This observation of atypical behavior agrees well with
characteristic features attributable to spherical resonance from metallic
inclusions from optical spectroscopy measurements.Comment: 3 pages, 3 figure
Charge states and magnetic ordering in LaMnO3/SrTiO3 superlattices
We investigated the magnetic and optical properties of
[(LaMnO3)n/(SrTiO3)8]20 (n = 1, 2, and 8) superlattices grown by pulsed laser
deposition. We found a weak ferromagnetic and semiconducting state developed in
all superlattices. An analysis of the optical conductivity showed that the
LaMnO3 layers in the superlattices were slightly doped. The amount of doping
was almost identical regardless of the LaMnO3 layer thickness up to eight unit
cells, suggesting that the effect is not limited to the interface. On the other
hand, the magnetic ordering became less stable as the LaMnO3 layer thickness
decreased, probably due to a dimensional effect.Comment: 17 pages including 4 figures, accepted for publication in Phys. Rev.
- …