268 research outputs found
A NEW VALID SHOCK ABSORBENCY TEST FOR THIRD GENERATION ARTIFICIAL TURF
This study aims to re-examine how much the current mechanical testing procedure is valid to evaluate the shock absorbency of third generation artificial turf (3-g turf) and to establish a new testing procedure which precisely reflects the acute load by human sports action. The standard DIN test was conducted for the 3-g turfs with different infill rubber size and the number of layers. The baseline of the load of acute sports action was obtained from the ground reaction force of landing of 50 cm height with minimal shock attenuation. For reproducing the force similar to such hard landing, a testing rig was developed and several types of the 3-g turf with different infill and depth: sand 40 mm, rubber 40 mm, rubber 15 mm and sand/rubber 40 mm were tested. The standard test was found to be inappropriate to evaluate the shock absorbency of the 3-g turf, in particular for likely acute, high loading by human sports action. In contrast, the newly developed testing rig succeeded in illustrating the differences of shock attenuation properties between the 3-g turfs. The need of replicate high loading test using an alternative testing procedure was highlighted
Analysis of the Brinkman-Forchheimer equations with slip boundary conditions
In this work, we study the Brinkman-Forchheimer equations driven under slip
boundary conditions of friction type. We prove the existence and uniqueness of
weak solutions by means of regularization combined with the Faedo-Galerkin
approach. Next we discuss the continuity of the solution with respect to
Brinkman's and Forchheimer's coefficients. Finally, we show that the weak
solution of the corresponding stationary problem is stable
Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : modelling of manganese removal
In the earlier work, a dynamic model for the BOF process based on the multi-zone reaction kinetics has been developed. In the preceding part, the mechanism of manganese transfer in three reactive zones of the converter has been analyzed. This study identifies that temperature at the slag-metal reaction interface plays a major role in the Mn reaction kinetics and thus a mathematical treatment to evaluate temperature at each reaction interface has been successfully employed in the rate calculation. The Mn removal rate obtained from different zones of the converter predicts that the first stage of the blow is dominated by the oxidation of Mn at the jet impact zone, albeit some additional Mn refining has been observed as a result of the oxidation of metal droplets in emulsion phase. The mathematical model predicts that the reversion of Mn from slag to metal primarily takes place at the metal droplet in the emulsion due to an excessive increase in slag-metal interface temperature during the middle stage of blowing. In the final stage of the blow, the competition between simultaneous reactions in jet impact and emulsion zone controls the direction of mass flow of manganese. Further, the model prediction shows that the Mn refining in the emulsion is a strong function of droplet diameter and the residence time. Smaller sized droplets approach equilibrium quickly and thus contribute to a significant Mn conversion between slag and metal compared to the larger sized ones. The overall model prediction for Mn in the hot metal has been found to be in good agreement with two sets of different size top blowing converter data reported in the literature
Investigation on viscosity and non-isothermal crystallization behavior of P-bearing steelmaking slags with varying TiO2 content
The viscous flow and crystallization behavior of CaO-SiO2-MgO-Al2O3-FetO-P2O5-TiO2 steelmaking slags have been investigated over a wide range of temperatures under Ar (High purity, >99.999 pct) atmosphere, and the relationship between viscosity and structure was determined. The results indicated that the viscosity of the slags slightly decreased with increasing TiO2 content. The constructed nonisothermal continuous cooling transformation (CCT) diagrams revealed that the addition of TiO2 lowered the crystallization temperature. This can mainly be ascribed to that addition of TiO2 promotes the formation of [TiO6]-octahedra units and, consequently, the formation of MgFe2O4-Mg2TiO4 solid solution. Moreover, the decreasing viscosity has a significant effect on enhancing the diffusion of ion units, such as Ca2+ and [TiO4]-tetrahedra, from bulk melts to the crystal–melt interface. The crystallization of CaTiO3 and CaSiTiO5 was consequently accelerated, which can improve the phosphorus content in P-enriched phase (n2CaO·SiO2-3CaO·P2O5). Finally, the nonisothermal crystallization kinetics was characterized and the activation energy for the primary crystal growth was derived such that the activation energy increases from −265.93 to −185.41 KJ·mol−1 with the addition of TiO2 content, suggesting that TiO2 lowered the tendency for the slags to crystallize
Transition from collision to subduction and its relation to slab seismicity and plate coupling
Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : model derivation and validation
A multi-zone kinetic model coupled with a dynamic slag generation model was developed for the simulation of hot metal and slag composition during the BOF operation. The three reaction zones, (i) jet impact zone (ii) slag-bulk metal zone (iii) slag-metal-gas emulsion zone were considered for the calculation of overall refining kinetics. In the rate equations, the transient rate parameters were mathematically described as a function of process variables. A micro and macroscopic rate calculation methodology (micro-kinetics and macro-kinetics) were developed to estimate the total refining contributed by the recirculating metal droplets through the slag-metal emulsion zone. The micro-kinetics involves developing the rate equation for individual droplets in the emulsion. The mathematical models for the size distribution of initial droplets, kinetics of simultaneous refining of elements, the residence time in the emulsion, dynamic interfacial area change were established in the micro-kinetic model. In the macro-kinetics calculation, a droplet generation model was employed and the total amount of refining by emulsion was calculated by summing the refining from the entire population of returning droplets. A dynamic FetO generation model based on oxygen mass balance was developed and coupled with the multi-zone kinetic model. The effect of post combustion on the evolution of slag and metal composition was investigated. The model was applied to a 200-ton top blowing converter and the simulated value of metal and slag was found to be in good agreement with the measured data. The post-combustion ratio was found to be an important factor in controlling FetO content in the slag and the kinetics of Mn and P in a BOF process
A viscoelastic model of interseismic strain concentration in Niigata-Kobe Tectonic Zone of central Japan
- …