Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe2O3) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt4BF4 (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes

Conducting polymer nanocomposite-based supercapacitors

The use of nanocomposites of electronically-conducting polymers for supercapacitors has increased significantly over the past years, due to their high capacitances and abilities to withstand many charge-discharge cycles. We have recently been investigating the use of nanocomposites of electronically-conducting polymers containing conducting and non-conducting nanomaterials such as carbon nanotubes and cellulose nanocrystals, for use in supercapacitors. In this contribution, we provide a summary of some of the key issues in this area of research. This discussion includes some history, fundamental concepts, the physical and chemical processes involved, and the challenges that these nanocomposite materials must overcome in order to become technologically viable. Due to space limitations, this is not a complete review of all the work that has been done in this field and we have focused on common themes that appear in the published work. Our aim is that this chapter will help readers to understand the advantages and challenges involved in the use of these materials in supercapacitors and to identify areas for further development

Charging/discharging kinetics of poly(3,4-ethylenedioxythiophene) in 1-ethyl-3-methylimidazolium bis-(trifluoromethylsulfonyl)imide ionic liquid under galvanostatic conditions

International audienc

Ions transfer mechanisms during the electrochemical oxidation of poly(3,4-ethylenedioxythiophene) in 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide ionic liquid

The cyclic voltammetry and the electrochemical impedance spectroscopy responses of p-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodeposited on platinum electrode surface were studied in a room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide (EMITFSI). The influence of adding salt, lithium bis((trifluoromethyl)sulfonyl)amide (LiTFSI, Li(CF3SO2)2N), was studied. When PEDOT was prepared in acetonitrile, the cyclic voltammograms displayed two distinct anodic peaks indicating at least two redox reaction mechanisms. Results indicated that for one of these mechanisms 1-ethyl-3-methylimidazolium cation was the exchanged species during the oxidation, and at the same time bis((trifluoromethyl)sulfonyl)amide anion could be viewed as immobile ions trapped in the polymer film. The impedance responses were analyzed within two parallel diffusion paths that reflected the non-uniformity of the electroactive polymer film. The variation of the two time diffusion constants as a function of potential followed the same trend as the kinetic parameters determined by a potential step method. The total capacitance form electrochemical impedance spectroscopy was in agreement with that has obtained with cyclic voltammetry. Results showed also the importance of the electrodeposition conditions on the electrochemical behavior of PEDOT. Keywords: Poly(3,4-ethylenedioxythiophene), Ions transfer, Room-temperature ionic liquid, Conducting polymer, Impedanc

Electrochemical behaviour of poly(3,4-ethylenedioxythiophene) in a room-temperature ionic liquid

The cyclic voltammetry responses and the redox switching dynamics of poly(3,4-ethylenedioxythiophene) (PEDOT) in a room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide (EMImTf2N), were investigated. The shape of the cyclic voltammograms showed two anodic and two cathodic peaks. These peak currents varied linearly with the scan rate indicating a thin-layer behaviour. No memory effects were observed during the cyclic voltammetry experiments in this ionic liquid. On the other hand, the redox switching dynamics of PEDOT were studied by means of potential step experiments. The analysis of chronocoulograms in term of RC-circuits indicated that the time dependence of the charge transferred during the potential step showed two time constants. These results were consistent with the postulated structure or morphology of the PEDOT film which contained two types of coexisting zones: a compact and an open structures. Keywords: Conducting polymer, Poly(3,4-ethylenedioxythiophene), Memory effect, Redox switching, Ionic liqui

Chemical capacitance of nanoporous-nanocrystalline TiO2 in a room temperature ionic liquid

The electrochemical behaviour of nanoporous TiO2 in a room temperature ionic liquid (RTIL), 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide (EMITFSI), was investigated by cyclic voltammetry (CV) and impedance spectroscopy. Exponentially rising currents in voltammetry were attributed to the charging/discharging of electrons in the TiO2 film and a charge transfer mechanism. The main features of the voltammetry and impedance followed the same trends in the ionic liquid as in other organic solvents and also in aqueous electrolytes. In the presence of lithium ions, the onset potential of the charge accumulation increased due to the change of the initial position of the TiO2 conduction band. The results show that substitution of organic solvents contained in solar cells, supercapacitors or other electrochemical devices is in general feasible, though requires some adjustment in the electrolyte composition for optimal performance