199 research outputs found
Recommended from our members
Laser desorption from and reconstruction on Si(100) surfaces studied by scanning tunneling microscopy
Laser irradiated Si(100) surfaces were studied with an ultrahigh-vacuum scanning tunneling microscopy (STM) system. Our observations indicate that only the dimerized outermost atomic layer is removed if the laser fluence is below the melting threshold with a photon energy larger than the band gap. The newly exposed layer, surprisingly, did not have a dimerized atomic structure, but rather, resembled that of a bulk-terminated structure. The uncovered layer remained atomically smooth (no vacancies) even after 90% of the outermost layer was removed. A possible explanation of these observations is that atom removal occurs by a preferential breakage of the atomic bonds in defect sites. When the laser fluence was increased to levels above the melting threshold, extensive surface roughening occurs
Applications of Sxps for Studying Surface Structure, Reaction Mechanisms and Kinetics
Soft x-ray photoelectron spectroscopy (SXPS) from the S 2p core level has been used to study adsorbate induced reconstruction, identify reaction intermediates and study reaction kinetics on the Ni(111) surface. The S 2p binding energy is affected by the nature of the surface adsorption site. It has been determined from the number of S 2p states and their relative binding energies that adsorbed S induces a reconstruction of the Ni(111) surface and that the S adsorbs in fourfold sites on terraces and in troughs. S 2p SXPS has also been used to identify adsorbed species during the thermal decomposition of methanethiol on Ni(111). CH{sub 3}SH adsorbs as CH{sub 3}S{minus} at low temperatures. Above 200 K, the CH{sub 3}S{minus} changes adsorption site and the C-S bond begins to cleave. The relative concentrations of CH{sub 3}S{minus} in the two different sites and of atomic S have been monitored as a function of temperature and initial coverage. As a result of the sensitivity and resolution available in SXPS, reaction rates and kinetic parameters have been obtained for the decomposition of benzenethiol on Ni(111) by monitoring the changes in the surface composition continuously as a function of temperature and time
Neutrons for Catalysis: A Workshop on Neutron Scattering Techniques for Studies in Catalysis
This report summarizes the Workshop on Neutron Scattering Techniques for Studies in Catalysis, held at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) on September 16 and 17, 2010. The goal of the Workshop was to bring experts in heterogeneous catalysis and biocatalysis together with neutron scattering experimenters to identify ways to attack new problems, especially Grand Challenge problems in catalysis, using neutron scattering. The Workshop locale was motivated by the neutron capabilities at ORNL, including the High Flux Isotope Reactor (HFIR) and the new and developing instrumentation at the SNS. Approximately 90 researchers met for 1 1/2 days with oral presentations and breakout sessions. Oral presentations were divided into five topical sessions aimed at a discussion of Grand Challenge problems in catalysis, dynamics studies, structure characterization, biocatalysis, and computational methods. Eleven internationally known invited experts spoke in these sessions. The Workshop was intended both to educate catalyst experts about the methods and possibilities of neutron methods and to educate the neutron community about the methods and scientific challenges in catalysis. Above all, it was intended to inspire new research ideas among the attendees. All attendees were asked to participate in one or more of three breakout sessions to share ideas and propose new experiments that could be performed using the ORNL neutron facilities. The Workshop was expected to lead to proposals for beam time at either the HFIR or the SNS; therefore, it was expected that each breakout session would identify a few experiments or proof-of-principle experiments and a leader who would pursue a proposal after the Workshop. Also, a refereed review article will be submitted to a prominent journal to present research and ideas illustrating the benefits and possibilities of neutron methods for catalysis research
First-principles study of the polar O-terminated ZnO surface in thermodynamic equilibrium with oxygen and hydrogen
Using density-functional theory in combination with a thermodynamic formalism
we calculate the relative stability of various structural models of the polar
O-terminated (000-1)-O surface of ZnO. Model surfaces with different
concentrations of oxygen vacancies and hydrogen adatoms are considered.
Assuming that the surfaces are in thermodynamic equilibrium with an O2 and H2
gas phase we determine a phase diagram of the lowest-energy surface structures.
For a wide range of temperatures and pressures we find that hydrogen will be
adsorbed at the surface, preferentially with a coverage of 1/2 monolayer. At
high temperatures and low pressures the hydrogen can be removed and a structure
with 1/4 of the surface oxygen atoms missing becomes the most stable one. The
clean, defect-free surface can only exist in an oxygen-rich environment with a
very low hydrogen partial pressure. However, since we find that the
dissociative adsorption of molecular hydrogen and water (if also the
Zn-terminated surface is present) is energetically very preferable, it is very
unlikely that a clean, defect-free (000-1)-O surface can be observed in
experiment.Comment: 10 pages, 4 postscript figures. Uses REVTEX and epsf macro
Influence of band width on the scattered ion yield spectra of a He + Ion by resonant or quasi-resonant charge exchange neutralization
The influence of the band structure, especially the bandwidth, on the scattered ion yield spectra of a He+ ion by the resonant or quasi-resonant neutralization was theoretically examined using quantum rate equations. When calculating the scattered ion yield spectra of He+ to simulate the experimental data, we observed that the band structure, especially the bandwidth, had a strong influence on the spectra at relatively low incident He+ ion energies of less than several hundred eV. Through many simulations, it was determined that theoretical calculations that include bandwidth calculation can simulate or reproduce the experimentally observed spectra of He+-In, He+-Ga, and He+-Sn systems. In contrast, simulations not including bandwidth simulation could neither reproduce nor account for such spectra. Furthermore, the calculated ion survival probability (ISP) at low incident ion energies tended to decrease with increasing bandwidth. This decrease in ISP probably corresponds to the relatively small scattered ion yield usually observed at low incident ion energies. Theoretically, such a decrease indicates that a He+ ion with a low incident energy can be easily neutralized on the surface when the bandwidth is large
Recommended from our members
Neutrons for Catalysis: A Workshop on Neutron Scattering Techniques for Studies in Catalysis
This report summarizes the Workshop on Neutron Scattering Techniques for Studies in Catalysis, held at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) on September 16 and 17, 2010. The goal of the Workshop was to bring experts in heterogeneous catalysis and biocatalysis together with neutron scattering experimenters to identify ways to attack new problems, especially Grand Challenge problems in catalysis, using neutron scattering. The Workshop locale was motivated by the neutron capabilities at ORNL, including the High Flux Isotope Reactor (HFIR) and the new and developing instrumentation at the SNS. Approximately 90 researchers met for 1 1/2 days with oral presentations and breakout sessions. Oral presentations were divided into five topical sessions aimed at a discussion of Grand Challenge problems in catalysis, dynamics studies, structure characterization, biocatalysis, and computational methods. Eleven internationally known invited experts spoke in these sessions. The Workshop was intended both to educate catalyst experts about the methods and possibilities of neutron methods and to educate the neutron community about the methods and scientific challenges in catalysis. Above all, it was intended to inspire new research ideas among the attendees. All attendees were asked to participate in one or more of three breakout sessions to share ideas and propose new experiments that could be performed using the ORNL neutron facilities. The Workshop was expected to lead to proposals for beam time at either the HFIR or the SNS; therefore, it was expected that each breakout session would identify a few experiments or proof-of-principle experiments and a leader who would pursue a proposal after the Workshop. Also, a refereed review article will be submitted to a prominent journal to present research and ideas illustrating the benefits and possibilities of neutron methods for catalysis research
Recommended from our members
Applications of SXPS for studying surface structure, reaction mechanisms and kinetics
Soft x-ray photoelectron spectroscopy (SXPS) from the S 2p core level has been used to study adsorbate induced reconstruction, identify reaction intermediates and study reaction kinetics on the Ni(111) surface. The S 2p binding energy is affected by the nature of the surface adsorption site. It has been determined from the number of S 2p states and their relative binding energies that adsorbed S induces a reconstruction of the Ni(111) surface and that the S adsorbs in fourfold sites on terraces and in troughs. S 2p SXPS has also been used to identify adsorbed species during the thermal decomposition of methanethiol on Ni(111). CH{sub 3}SH adsorbs as CH{sub 3}S{minus} at low temperatures. Above 200 K, the CH{sub 3}S{minus} changes adsorption site and the C-S bond begins to cleave. The relative concentrations of CH{sub 3}S{minus} in the two different sites and of atomic S have been monitored as a function of temperature and initial coverage. As a result of the sensitivity and resolution available in SXPS, reaction rates and kinetic parameters have been obtained for the decomposition of benzenethiol on Ni(111) by monitoring the changes in the surface composition continuously as a function of temperature and time
- …