Proteomic analysis of sweet algerian apricot kernels ( Prunus armeniaca L.) by combinatorial peptide ligand libraries and LC-MS/MS

An investigation on the proteome of the sweet kernel of apricot, based on equalisation with combinatorial peptide ligand libraries (CPLLs), SDS-PAGE, nLC-ESI-MS/MS, and database search, permitted identifying 175 proteins. Gene ontology analysis indicated that their main molecular functions are in nucleotide binding (20.9 %), hydrolase activities (10.6 %), kinase activities (7 %), and catalytic activity (5.6%). A protein-protein association network analysis using STRING software permitted to build an interactomic map of all detected proteins, characterised by 34 interactions. In order to forecast the potential health benefits deriving from the consumption of these proteins, the two most abundant, i.e. Prunin 1 and 2, were enzymatically digested in silico predicting 10 and 14 peptides, respectively. Searching their sequences in the database BIOPEP, it was possible to suggest a variety of bioactivities, including dipeptidyl peptidase-IV (DPP-IV) and angiotensin converting enzyme I (ACE) inhibition, glucose uptake stimulation and antioxidant properties

Characterization of OPC Matrix Containing Dealuminated Kaolin

The suitability of replacing Portland cement by dealuminated calcined kaolin as received waste obtained from an alum production factory through the extraction of aluminium, also by dealuminated samples treated with lime solution, is investigated. The chemical and mineralogical compositions of the samples are measured. Their pozzolanic reactivity and their surface areas were determined. The effect of replacement on  setting time,  flowability, rate of flowability loss and strength of mortars was tested and compared to control OPC samples and others containing silica fumes. It was found that the as received dealuminated kaolin and that treated with lime possess higher pozzolanic reactivity and show larger surface areas than silica fumes. The incorporation of the as received dealuminated kaolin (DK) in OPC paste accelerates the setting time; while the lime-treated samples lead to retardation. The flowability of the OPC mortar is little affected by the as received DK samples and is strongly reduced by the lime-treated one and silica fumes. The three admixtures cause strong flowability loss with time. The 56d-compressive and tensile strengths of the mortars improve with 5 and 10% OPC replacement by DK

INFLUENCE OF FORMULATION FACTORS ON THE SIZE OF NANOSTRUCTURED LIPID CARRIERS AND NANOEMULSIONS PREPARED BY HIGH SHEAR HOMOGENIZATION

Objective: The main purpose of this work was to elucidate the effect of certain formulation factors on the size of nanostructured lipid carriers (NLCs) and nanoemulsions (NEs) by using high shear homogenization method.Methods: NLCs and NEs were prepared by high shear homogenization method using different liquid lipids types such as (Dermarol DCO® and Dermarol CCT®) at different concentrations. The effect of different concentration ratios of Tween 80 to Span 20 (2.5/1, 5/1, 10/1, 15/1) w/w % and different homogenization speeds (12 000, 18 000 rpm) on the resulted particle size were also studied.Results: The results revealed that the optimum NLCs and NEs resulted when we use Dermarol CCT® with a concentration of 90 % as liquid lipid and decreasing surfactant ratio to (2.5/1) w/w % with increasing the homogenization speed to 18 000 rpm. Conclusion: NLCs and NEs were successfully prepared, and from this study, it can be concluded that NLCs have the optimum particle size than Nanoemulsions

Radiomodulatory effect of a non-electrophilic NQO1 inducer identified in a screen of new 6, 8-diiodoquinazolin-4(<em style="box-sizing: border-box; margin: 0px; padding: 0px;">3H</em>)-ones carrying a sulfonamide moiety

Fifteen new quinazolinone derivatives bearing benzenesulfonamide moiety with variable acetamide tail were synthesized. The structures assigned to the products were concordant with the microanalytical and spectral data. Compounds 4-18 were screened for their ability to induce the antioxidant enzyme NAD(P)H: quinone oxidoreductase 1(NQO1) in cells, a classical target for transcription factor nuclear factor erythroid 2-related factor 2 (Nrf2). The 2-((6,8-diiodo-4-oxo-3-(4-sulfamoylphenyl)-3,4-dihydroquinazolin-2-yl)thio)-N-(3,4,5-trimethoxyphenyl) acetamide 15 showed the most potent NQO1 inducer activity in vitro. Compound 15 had low toxicity in mice (LD50=500 mg/Kg). It also reduced the damaging effects of gamma radiation, as assessed by the levels of Nrf2, NQO1, reactive oxygen species (ROS) and malondialdehyde (MDA) in liver tissues. In addition, compound 15 showed amelioration in the complete blood count of irradiated mice and enhanced survival over a period of 30 days following irradiation. Molecular docking of 15 inside the Nrf2-binding site of Kelch-like ECH associated protein 1 (Keap1), the main negative regulator of Nrf2, showed the same binding interactions as that of the co-crystallized ligand considering the binding possibilities and energy scores. These findings suggest that compound 15 could be considered as a promising antioxidant and radiomodulatory agent

Interacción entre cementos de diferente composición y aditivos superplastificantes

The slump behavior of ordinary Portland-, pozzolanic (red brick powder)-, sulfate resistant-, and limestone cement pastes caused by ≤ 1% additions of polycondensates and polycarboxylates superplasticizers are monitored for up to 90 minutes. With the plolycondensates, Portland- and pozzolanic cements gain fluidity at higher dosages than sulfate resistant and limestone cements. Limestone cement shows the best slump retention. The aluminate and sulfate phases play a major role in the fluidity. With the polycarboxylates, all cements gain fluidity with dosages of ≤ 0.3%. A polycarboxylate with no resonance of methyl methylene proton in the main chain identified in the NMR spectra creates good slump retention. This is explained by a low mobility of the structure and the predominance of the steric effect. The polycarboxylate shows also strong ether bands relative to the ester groups in the IR spectra and a low polydispersity observed in the elution of few low molecular weight species in the HPLC chromatogram.Se ha estudiado el efecto fluidificante (hasta 90 minutos) ejercido por la incorporación de entre 0-1% de aditivos policondensados y policarboxilatos en pastas de cemento Portland, puzolánico, resistente a sulfatos y con adición de caliza. Con la incorporación de los aditivos policondensados, se produjo un incremento de la fluidez de los cementos Portland y puzolánico a mayores dosificaciones que las necesarias en los cementos resistente a sulfatos y con adición de caliza. Éste último presentó la mejor retención de la fluidez. Las fases aluminatos y sulfatos juegan un importante papel en la fluidez inducida. Todos los cementos incrementaron su fluidez con la incorporación de aditivos policarboxilatos a dosificaciones menores del 0,3%. El policarboxilato que no presenta en los espectros de RMN, resonancia asignada al protón de los grupos metil metileno, presenta buena retención de la fluidez. Esto es debido a la baja flexibilidad de la estructura y predominancia del efecto estérico. Este aditivo presenta también, mayor relación de grupos eter frente a grupos ester en los espectros IR, asi como una baja polidispersidad observada en la elución de especies de bajo peso molecular a través de HPLC

NAD(P)H:quinone oxidoreductase 1 inducer activity of some novel anilinoquinazoline derivatives

The Kelch-like ECH-associated protein 1 (Keap1)/nuclear factor erythroid 2-related factor 2 (Nrf2)/antioxidant response elements pathway enables cells to survive oxidative stress conditions through regulating the expression of cytoprotective enzymes such as NAD(P)H:quinone oxidoreductase 1 (NQO1). This work presents the design and synthesis of novel anilinoquinazoline derivatives (2–16a) and evaluation of their NQO1 inducer activity in murine cells. Molecular docking of the new compounds was performed to assess their ability to inhibit Keap1–Nrf2 protein–protein interaction through occupying the Keap1–Nrf2-binding domain, which leads to Nrf2 accumulation and enhanced gene expression of NQO1. Docking results showed that all compounds can potentially interact with Keap1; however, 1,5-dimethyl-2-phenyl-4-(2-phenylquinazolin-4-ylamino)-1,2-dihydropyrazol-3-one (9), the most potent inducer, showed the largest number of interactions with key amino acids in the binding pocket (Arg483, Tyr525, and Phe478) compared to the native ligand or any other compound in this series

Flavoring and Coating Technologies for Processing Methods, Packaging Materials, and Preservation of Food

The food sector addresses perhaps the main business with regard to degree, speculation, and variety. In a forever-evolving society, dietary requirements and inclinations are broadly factors. Alongside offering extraordinary mechanical help for inventive and valued items, the ongoing food industry ought to likewise cover the essential necessities of a consistently expanding populace. Active food packaging strategies have experienced a tremendous push forward in the last two decades. It is a great opportunity to decide which bioactive component will be more appropriate for each specific application once the microbiological hazards for each type of food item are recognized and the microbial targets are clearly differentiated. In order to improve Flavor delivery and preservation, the food industry and the science of Flavor are constantly creating new ingredients, processing techniques, and packaging materials. This improves the quality and acceptability of food by boosting Flavor stability. As most Flavors can be influenced by interactions with other food ingredients in addition to being volatile and chemically unstable to air, light, moisture, and high temperatures. The food sector will succeed in the long run if new technologies are quickly adopted and effectively used to meet both current and future consumer expectations