Continuous phase stabilization and active interferometer control using two modes

We present a computer-based active interferometer stabilization method that can be set to an arbitrary phase difference and does not rely on modulation of the interfering beams. The scheme utilizes two orthogonal modes propagating through the interferometer with a constant phase difference between them to extract a common phase and generate a linear feedback signal. Switching times of 50ms over a range of 0 to 6 pi radians at 632.8nm are experimentally demonstrated. The phase can be stabilized up to several days to within 3 degrees.Comment: 3 pages, 2 figure

Photon Number Statistics of Multimode Parametric Down-Conversion

We experimentally analyze the complete photon number statistics of parametric downconversion and ascertain the influence of multimode effects. Our results clearly reveal a difference between single mode theoretical description and the measured distributions. Further investigations assure the applicability of loss-tolerant photon number reconstruction and prove strict photon number correlation between signal and idler modes.Comment: 5 pages, 3 figure

Absolute efficiency estimation of photon-number-resolving detectors using twin beams

A nonclassical light source is used to demonstrate experimentally the absolute efficiency calibration of a photon-number-resolving detector. The photon-pair detector calibration method developed by Klyshko for single-photon detectors is generalized to take advantage of the higher dynamic range and additional information provided by photon-number-resolving detectors. This enables the use of brighter twin-beam sources including amplified pulse pumped sources, which increases the relevant signal and provides measurement redundancy, making the calibration more robust

Measuring Measurement: Theory and Practice

Recent efforts have applied quantum tomography techniques to the calibration and characterization of complex quantum detectors using minimal assumptions. In this work we provide detail and insight concerning the formalism, the experimental and theoretical challenges and the scope of these tomographical tools. Our focus is on the detection of photons with avalanche photodiodes and photon number resolving detectors and our approach is to fully characterize the quantum operators describing these detectors with a minimal set of well specified assumptions. The formalism is completely general and can be applied to a wide range of detectorsComment: 22 pages, 27 figure

Mapping coherence in measurement via full quantum tomography of a hybrid optical detector

Quantum states and measurements exhibit wave-like --- continuous, or particle-like --- discrete, character. Hybrid discrete-continuous photonic systems are key to investigating fundamental quantum phenomena, generating superpositions of macroscopic states, and form essential resources for quantum-enhanced applications, e.g. entanglement distillation and quantum computation, as well as highly efficient optical telecommunications. Realizing the full potential of these hybrid systems requires quantum-optical measurements sensitive to complementary observables such as field quadrature amplitude and photon number. However, a thorough understanding of the practical performance of an optical detector interpolating between these two regions is absent. Here, we report the implementation of full quantum detector tomography, enabling the characterization of the simultaneous wave and photon-number sensitivities of quantum-optical detectors. This yields the largest parametrization to-date in quantum tomography experiments, requiring the development of novel theoretical tools. Our results reveal the role of coherence in quantum measurements and demonstrate the tunability of hybrid quantum-optical detectors.Comment: 7 pages, 3 figure

Avalanche Photo-Detection for High Data Rate Applications

Avalanche photo detection is commonly used in applications which require single photon sensitivity. We examine the limits of using avalanche photo diodes (APD) for characterising photon statistics at high data rates. To identify the regime of linear APD operation we employ a ps-pulsed diode laser with variable repetition rates between 0.5MHz and 80MHz. We modify the mean optical power of the coherent pulses by applying different levels of well-calibrated attenuation. The linearity at high repetition rates is limited by the APD dead time and a non-linear response arises at higher photon-numbers due to multiphoton events. Assuming Poissonian input light statistics we ascertain the effective mean photon-number of the incident light with high accuracy. Time multiplexed detectors (TMD) allow to accomplish photon- number resolution by photon chopping. This detection setup extends the linear response function to higher photon-numbers and statistical methods may be used to compensate for non-linearity. We investigated this effect, compare it to the single APD case and show the validity of the convolution treatment in the TMD data analysis.Comment: 16 pages, 5 figure

Manipulating the quantum information of the radial modes of trapped ions: Linear phononics, entanglement generation, quantum state transmission and non-locality tests

We present a detailed study on the possibility of manipulating quantum information encoded in the "radial" modes of arrays of trapped ions (i.e., in the ions' oscillations orthogonal to the trap's main axis). In such systems, because of the tightness of transverse confinement, the radial modes pertaining to different ions can be addressed individually. In the first part of the paper we show that, if local control of the radial trapping frequencies is available, any linear optical and squeezing operation on the locally defined modes - on single as well as on many modes - can be reproduced by manipulating the frequencies. Then, we proceed to describe schemes apt to generate unprecedented degrees of bipartite and multipartite continuous variable entanglement under realistic noisy working conditions, and even restricting only to a global control of the trapping frequencies. Furthermore, we consider the transmission of the quantum information encoded in the radial modes along the array of ions, and show it to be possible to a remarkable degree of accuracy, for both finite-dimensional and continuous variable quantum states. Finally, as an application, we show that the states which can be generated in this setting allow for the violation of multipartite non-locality tests, by feasible displaced parity measurements. Such a demonstration would be a first test of quantum non-locality for "massive" degrees of freedom (i.e., for degrees of freedom describing the motion of massive particles).Comment: 21 pages; this paper, presenting a far more extensive and detailed analysis, completely supersedes arXiv:0708.085

Integrated Photonic Sensing

Loss is a critical roadblock to achieving photonic quantum-enhanced technologies. We explore a modular platform for implementing integrated photonics experiments and consider the effects of loss at different stages of these experiments, including state preparation, manipulation and measurement. We frame our discussion mainly in the context of quantum sensing and focus particularly on the use of loss-tolerant Holland-Burnett states for optical phase estimation. In particular, we discuss spontaneous four-wave mixing in standard birefringent fibre as a source of pure, heralded single photons and present methods of optimising such sources. We also outline a route to programmable circuits which allow the control of photonic interactions even in the presence of fabrication imperfections and describe a ratiometric characterisation method for beam splitters which allows the characterisation of complex circuits without the need for full process tomography. Finally, we present a framework for performing state tomography on heralded states using lossy measurement devices. This is motivated by a calculation of the effects of fabrication imperfections on precision measurement using Holland-Burnett states.Comment: 19 pages, 7 figure

Detector decoy quantum key distribution

Photon number resolving detectors can enhance the performance of many practical quantum cryptographic setups. In this paper, we employ a simple method to estimate the statistics provided by such a photon number resolving detector using only a threshold detector together with a variable attenuator. This idea is similar in spirit to that of the decoy state technique, and is specially suited for those scenarios where only a few parameters of the photon number statistics of the incoming signals have to be estimated. As an illustration of the potential applicability of the method in quantum communication protocols, we use it to prove security of an entanglement based quantum key distribution scheme with an untrusted source without the need of a squash model and by solely using this extra idea. In this sense, this detector decoy method can be seen as a different conceptual approach to adapt a single photon security proof to its physical, full optical implementation. We show that in this scenario the legitimate users can now even discard the double click events from the raw key data without compromising the security of the scheme, and we present simulations on the performance of the BB84 and the 6-state quantum key distribution protocols.Comment: 27 pages, 7 figure

Measuring measurement

Measurement connects the world of quantum phenomena to the world of classical events. It plays both a passive role, observing quantum systems, and an active one, preparing quantum states and controlling them. Surprisingly - in the light of the central status of measurement in quantum mechanics - there is no general recipe for designing a detector that measures a given observable. Compounding this, the characterization of existing detectors is typically based on partial calibrations or elaborate models. Thus, experimental specification (i.e. tomography) of a detector is of fundamental and practical importance. Here, we present the realization of quantum detector tomography: we identify the optimal positive-operator-valued measure describing the detector, with no ancillary assumptions. This result completes the triad, state, process, and detector tomography, required to fully specify an experiment. We characterize an avalanche photodiode and a photon number resolving detector capable of detecting up to eight photons. This creates a new set of tools for accurately detecting and preparing non-classical light.Comment: 6 pages, 4 figures,see video abstract at http://www.quantiki.org/video_abstracts/0807244