The impact of kinesiology tape application on the volume of interstitial space over the gastrocnemius within healthy mixed-gender participants using ultrasonography

Purpose: The purpose of this study was to analyze the impact of kinesiology tape application on the volume of interstitial space over the gastrocnemius within healthy mixed gender participants using diagnostic ultrasound. Materials/methods: A lab-based experiment was conducted involving thirty healthy participants 26.5 ± 8.5 who volunteered to take part in this study with no previous injuries. Participants were randomly allocated to either the kinesiology group, Zinc-oxide or no tape group. Kinesiology tape was applied through the “I Strip” technique. Each application comprised of a 10 cm piece of tape applied at the mid-point of the gastrocnemius, at a 50% stretch (7.5 cm each side). The interstitial space was recorded at this point using the Real Time Diagnostic Biosound Ultrasound machine. The tape was applied for twenty-four hours and the interstitial space was re-measured. Same methodology was repeated for those in the Zinc-oxide and the no tape group. Results: A one-way repeated measures ANOVA test reported a significant difference in the volume of interstitial space between the no tape and KT group and the KT and Zinc oxide group for both initial and 24-hour readings (p=0.002, p≤0.000). Paired t-tests between the initial and after 24-hours readings revealed no significant differences showing that there was no further increase of the interstitial space after 24 hours. Conclusions: The application of the kinesiology tape increases the interstitial space within healthy participants a twenty-four hour application. Further research should take place in relation to the different applied tensions of the tape and the impact this has upon the volume of interstitial space

A simple reactive-transport model of calcite precipitation in soils and other porous media

Calcite formation in soils and other porous media generally occurs around a localised source of reactants, such as a plant root or soil macro-pore, and the rate depends on the transport of reactants to and from the precipitation zone as well as the kinetics of the precipitation reaction itself. However most studies are made in well mixed systems, in which such transport limitations are largely removed. We developed a mathematical model of calcite precipitation near a source of base in soil, allowing for transport limitations and precipitation kinetics. We tested the model against experimentally-determined rates of calcite precipitation and reactant concentration–distance profiles in columns of soil in contact with a layer of HCO3−-saturated exchange resin. The model parameter values were determined independently. The agreement between observed and predicted results was satisfactory given experimental limitations, indicating that the model correctly describes the important processes. A sensitivity analysis showed that all model parameters are important, indicating a simpler treatment would be inadequate. The sensitivity analysis showed that the amount of calcite precipitated and the spread of the precipitation zone were sensitive to parameters controlling rates of reactant transport (soil moisture content, salt content, pH, pH buffer power and CO2 pressure), as well as to the precipitation rate constant. We illustrate practical applications of the model with two examples: pH changes and CaCO3 precipitation in the soil around a plant root, and around a soil macro-pore containing a source of base such as urea

The Primary Pretenders

We call a composite number q such that there exists a positive integer b with b^p == b (mod q) a prime pretender to base b. The least prime pretender to base b is the primary pretender q_b. It is shown that there are only 132 distinct primary pretenders, and that q_b is a periodic function of b whose period is the 122-digit number 19568584333460072587245340037736278982017213829337604336734362- 294738647777395483196097971852999259921329236506842360439300.Comment: 7 page

Transmission and group delay of microring coupled-resonator optical waveguides

We measured the transmission and group delay of microring coupled-resonator optical waveguides (CROWs). The CROWs consisted of 12 weakly coupled, microring resonators fabricated in optical polymers (PMMA on Cytop). The intrinsic quality factor of the resonators was 18,000 and the interresonator coupling was 1%, resulting in a delay of 110-140 ps and a slowing factor of 23-29 over a 17 GHz bandwidth

Polymer Microring Coupled-Resonator Optical Waveguides

We present measurements of the transmission and dispersion properties of coupled-resonator optical waveguides (CROWs) consisting of weakly coupled polymer microring resonators. The fabrication and the measurement methods of the CROWs are discussed as well. The experimental results agree well with the theoretical loss, waveguide dispersion, group delay, group velocity, and group-velocity dispersion (GVD). The intrinsic quality factors of the microrings were about 1.5 times 10^4 to 1.8 times 10^4, and group delays greater than 100 ps were measured with a GVD between -70 and 100 ps/(nm x resonator). With clear and simple spectral responses and without a need for the tuning of the resonators, the polymer microring CROWs demonstrate the practicability of using a large number of microresonators to control the propagation of optical waves

New East African Curculionidae Part I

Volume: XVI

Hybrid InGaAsP-InP Mach-Zehnder racetrack resonator for thermooptic switching and coupling control

An InGaAsP-InP optical switch geometry based on electrical control of waveguide-resonator coupling is demonstrated. Thermooptic tuning of a Mach-Zehnder interferometer integrated with a racetrack resonator is shown to result in switching with ON-OFF contrast up to 18.5 dB. The optical characteristics of this unique design enable a substantial reduction of the switching power, to a value of 26 mW in comparison with 40 mW for a conventional Mach-Zehnder interferometer switch. Modulation response measurements reveal a 3 dB bandwidth of 400 kHz and a rise time of 1.8 µs, comparing favorably with current state-of-the-art thermooptic switches

Electrically-pumped, broad-area, single-mode photonic crystal lasers

Planar broad-area single-mode lasers, with modal widths of the order of tens of microns, are technologically important for high-power applications and improved coupling efficiency into optical fibers. They may also find new areas of applications in on-chip integration with devices that are of similar size scales, such as for spectroscopy in microfluidic chambers or optical signal processing with micro-electromechanical systems. An outstanding challenge is that broad-area lasers often require external means of control, such as injection-locking or a frequency/spatial filter to obtain single-mode operation. In this paper, we propose and demonstrate effective index-guided, large-area, edge-emitting photonic crystal lasers driven by pulsed electrical current injection at the optical telecommunication wavelength of 1550nm. By suitable design of the photonic crystal lattice, our lasers operate in a single mode with a 1/e^2 modal width of 25μm and a length of 600μm

Lack of Ultrametricity in the Low-Temperature phase of 3D Ising Spin Glasses

We study the low-temperature spin-glass phases of the Sherrington-Kirkpatrick (SK) model and of the 3-dimensional short range Ising spin glass (3dISG). For the SK model, evidence for ultrametricity becomes clearer as the system size increases, while for the short-range case our results indicate the opposite, i.e. lack of ultrametricity. Our results are obtained by a recently proposed method that uses clustering to focus on the relevant parts of phase space and reduce finite size effects. Evidence that the mean field solution does not apply in detail to the 3dISG is also found by another method which does not rely on clustering