Design and manipulation of high-performance photovoltaic systems based on two-dimensional novel KAgSe/KAgX(X=S,Te) van der Waals heterojunctions

The realization of high-performance two-dimensional (2D) solar photovoltaic systems are both fundamentally intriguing and practically appealing to meet the fast-growing energy requirements. Since the limited application of single 2D crystals in photovoltaic, here we propose a family of 2D KAgSe/KAgX(X=S,Te) van der Waals heterostructures (vdWHs), which are constructed by combining two different KAgX layers through interlayer vdW interaction. After a systematic study and further regulatory research of these vdWHs based on the first-principles, numerous fascinating characteristics and physical mechanisms are obtained. Firstly, favorable potential applications of these vdWHs in photovoltaics are confirmed in virtue of their desirable optoelectronic properties, such as the robust stabilitis, moderate direct band gaps, type-II band alignments together with superior carrier mobilities, visible optical absorptions, power conversion efficiencys (PCEs) and photocurrents in their based photovoltaic devices. More importantly, when under varying vertical electric field Ez, a phase transition of band alignment from type-II to type-I of these vdWHs can be induced by the opposite band shifts between layers, which may enrich their applications in light-emitting diodes and lasers. Meanwhile, the PCE can be expanded up to 23%, and an obvious red-shift peak of the photocurrent in the visible light range are also obtained at different Ez. These fascinating tunable properties of KAgSe/KAgX vdWHs under varying Ez not only promote the improvement of their photoelectric performances, but the underlying mechanisms can also be applied to next experimental design and practical application of other 2D photovoltaic systems. Especially for the red-shift peak of the photocurrent, which is rarely found but highly desirable in practical visible photoelectric conversion.Comment: 11 pages, 7figure

Role of Flaxseed Gum and Whey Protein Microparticles in Formulating Low-Fat Model Mayonnaises

Flaxseed gum (FG) and whey protein microparticles (WPMs) were used to substitute fats in model mayonnaises. WPMs were prepared by grinding the heat-set whey protein gel containing 10 mM CaCl2 into small particles (10–20 µm). Then, 3 × 4 low-fat model mayonnaises were prepared by varying FG (0.3, 0.6, 0.9 wt%) and WPM (0, 8, 16, 24 wt%) concentrations. The effect of the addition of FG and WPMs on rheology, instrumental texture and sensory texture and their correlations were investigated. The results showed that all samples exhibited shear thinning behavior and ‘weak gel’ properties. Although both FG and WPMs enhanced rheological (e.g., viscosity and storage modulus) and textural properties (e.g., hardness, consistency, adhesiveness, cohesiveness) and kinetic stability, this enhancement was dominated by FG. FG and WPMs affected bulk properties through different mechanisms, (i.e., active filler and entangled polysaccharide networks). Panellists evaluated sensory texture in three stages: extra-oral, intra-oral and after-feel. Likewise, FG dominated sensory texture of model mayonnaises. With increasing FG concentration, sensory scores for creaminess and mouth-coating increased, whereas those of firmness, fluidity and spreadability decreased. Creaminess had a linear negative correlation with firmness, fluidity and spreadability (R2 > 0.985), while it had a linear positive correlation with mouth-coating (R2 > 0.97). A linear positive correlation (R2 > 0.975) was established between creaminess and viscosity at different shear rates/instrumental texture parameters. This study highlights the synergistic role of FG and WPMs in developing low-fat mayonnaises

Clinicopathologic Features and Prognosis of Female Early Breast Cancer With HER2 Low Expression: A Propensity Score Matched Analysis

Background: Metastatic breast cancer (MBC) patients with low expression of human epidermal growth factor 2 (HER2) have been proven to benefit from HER2 targeted therapy. We aimed to determine how HER2-low status affected survival and metastatic risk as well as how it affected pathological complete response (pCR) in neoadjuvant chemotherapy (NAC) patients. Methods: According to the results of immunohistochemistry (IHC) and in situ hybridization (ISH) testing, 321 female patients were sorted into HER2-low (IHC 1+/2+ with ISH negative) and HER2-zero (IHC 0) groups using propensity score matching (PSM). Overall survival (OS), disease-free survival (DFS), and distant disease-free survival (DDFS) were compared for both groups, while pCR was only analyzed for NAC patients. Results: In total, 97 patients in each group after PSM were included. We discovered that pCR was not associated with HER2 expression status in 45 patients who underwent NAC. Five-year OS in the HER2-low group was significantly higher (98.99%) than in the HER2-zero group (95.87%, P  = .044); however, this difference was not reflected in the 5-year DFS (90.61 vs 90.52%, P  = .868) and 5-year DDFS (93.67 vs 91.53%, P  = .757). Meanwhile, multivariate analysis revealed that HER2-low expression could indicate better OS ( P  = .047, hazard ratios [HRs] = 16.121, 95% confidence interval [CI] = 1.035-251.046), but it had no prognostic value for DFS or DDFS. Conclusion: When compared with HER2-zero expression, HER2-low expression was not connected to pCR and could not modify metastasis risk in female patients with early-stage breast cancer (BC), but it may prolong patient survival

Ultrasonic-Assisted Glycosylation with Glucose on the Functional and Structural Properties of Fish Gelatin

The effects of ultrasound-assisted glycosylation (UG) with glucose (GLU) on the emulsifying properties, foaming properties, gelling properties, and structural properties of fish gelatin (FG) were investigated. It was shown that UG with high power and a long duration facilitated the Maillard reaction through the reduction of the free amino acid contents. UG significantly improved the emulsifying ability index and foaming capacity of FG whilst decreasing the gel strength. Rheological analysis showed that UG modification prolonged the gelling time by hindering the triple-helix formation and decreasing the apparent viscosity of the gelatin solution. Structural analysis showed that UG treatment changed the secondary structure of the gelatin molecule by the formation of Millard reaction products (MRPs). Moreover, the UG treatment generally decreased the bound water contents of the gelatin gels with an increase in free water

Crossed flow microfluidics for high throughput screening of bioactive chemical–cell interactions

This paper describes the use of crossed laminar flow microfluidics for the selective capture of multiple cell types on-chip aiming for high throughput screening of various cell treatment compounds. Parallel laminar streams containing different cell types were perfused and captured on a cell adhesion protein-functionalized reaction area. Thereafter, parallel streams containing cell treatment solutions were delivered orthogonally over the captured cells. Multiple cell types and a range of cell treatment conditions could therefore be assessed in a single experiment. We were also able to sort mixed cell populations via antibody array clusters, and to further deliver treatments to subpopulations of cells. Moreover, using solutions with different tonicities, we successfully demonstrated the incorporation of a live/dead cell viability assessment on-chip for a direct read out assay following the treatments. This crossed laminar flow microfluidics for generation of a cell-based assay could therefore offer an interesting platform for high throughput screening of potential drug candidates, nanoparticle toxicity testing, or other cellular and molecular interventions

Preparation and Photocatalysis of Schlumbergera bridgesii-Like CdS Modified One-Dimensional TiO2 Nanowires on Zeolite

In recent years, composite semiconductor photocatalytic materials have received significant attention as a novel type of materials and technical means. So in this work, CdS-modified TiO2 nanowires are fabricated on natural zeolite by simple sol-gel and hydrothermal synthesis method. This novel composite semiconductor photocatalytic material has almost solved the shortcomings of pure TiO2, such as easy cohesion, low utilization rate, and exceedingly weak photocatalytic activities under visible light. The degradation efficiency of methylene blue dye in water is near to 90% with CdS-modified TiO2 nanowires/zeolite composite materials after 60 min under visible light, which indicated its huge potential application in wastewater treatment

Ratiometric Electrochemical Biosensing of Methyltransferase Activity

In this work, a novel ratiometric electrochemical readout platform was proposed and developed for the fast and flexible analysis of M.SssI methyltransferase (MTase) activity. In this platform, two hairpin DNAs (H1 and H2) were designed. H1 contains the palindromic sequence of 5′-CCGG-3′ in its stem which could be methylated and hybridize with H2 labeled by methylene blue (MB) as one of the signal reporters on a gold electrode (GE) in the presence of M.SssI MTase. Additionally, a specific immunoreaction was introduced by conjugating an anti-5-methylcytosine antibody, a DNA CpG methylation recognition unit, with 1,3-ferrocenedicarboxylic acid (Fc) as the second signal reporter. The results showed that when the Fc tag approaches, the MB tag was far from the gold electrode surface, resulting in a decrease in the oxidation peak current of MB (IMB) and an increase in the oxidation peak current of Fc (IFc). The ratiometric electrochemical method above shows the linear range of detection was 0 U/mL 40 U/mL with a detection limit of 0.083 U/mL (the mean signal of blank measures þ3s)

Ratiometric Electrochemical Biosensing of Methyltransferase Activity

In this work, a novel ratiometric electrochemical readout platform was proposed and developed for the fast and flexible analysis of M.SssI methyltransferase (MTase) activity. In this platform, two hairpin DNAs (H1 and H2) were designed. H1 contains the palindromic sequence of 5′-CCGG-3′ in its stem which could be methylated and hybridize with H2 labeled by methylene blue (MB) as one of the signal reporters on a gold electrode (GE) in the presence of M.SssI MTase. Additionally, a specific immunoreaction was introduced by conjugating an anti-5-methylcytosine antibody, a DNA CpG methylation recognition unit, with 1,3-ferrocenedicarboxylic acid (Fc) as the second signal reporter. The results showed that when the Fc tag approaches, the MB tag was far from the gold electrode surface, resulting in a decrease in the oxidation peak current of MB (IMB) and an increase in the oxidation peak current of Fc (IFc). The ratiometric electrochemical method above shows the linear range of detection was 0 U/mL 40 U/mL with a detection limit of 0.083 U/mL (the mean signal of blank measures þ3s)

A concise way to prevent bloom risk in ecological use of reclaimed water: Determination of the threshold by model calculation

The risk of algal blooms in landscape water bodies replenished by reclaimed water (RW) prompted the scientific management of RW discharge issues. Mathematical models are concise and convincing methods to stimulate algal growth and calculate thresholds for water quality control. This study presented three types of models, including one-parameter models, multiple-parameter models, and ecosystem dynamic models. Key influencing factors (such as nutrient concentration, light intensity, temperature, biotic processes, specific hydraulic conditions, etc.) are taken into consideration in these models. The work provided feasible methods for the management of reclaimed water to prevent water bloom outbreaks