A new, easy, fast, and safe method for CT-guided sacroplasty

Sacral insufficiency fractures constitute clinical challenges because no effective surgical techniques can be applied and only a conservative treatment is currently performed. Sacroplasty is increasingly used to treat sacral insufficiency fractures. A computed tomography (CT)-guided technique concerning the placement of the sacroplasty needles within the sacral wings by using a laser alignment light guidance associated with a CT gantry tilt in a plane parallel to the sacral bone is presented. This method allowed a fast and precise placement of the needle in and along the sacral wings, thus preventing the use of multiple needles to reach the fracture site

Outcome of long-axis percutaneous sacroplasty for the treatment of sacral insufficiency fractures

Our aim was to assess the clinical outcome of patients who were subjected to long-axis sacroplasty for the treatment of sacral insufficiency fractures. Nineteen patients with unilateral (n = 3) or bilateral (n = 16) sacral fractures were involved. Under local anaesthesia, each patient was subjected to CT-guided sacroplasty using the long-axis approach through a single entry point. An average of 6ml of polymethylmethacrylate (PMMA) was delivered along the path of each sacral fracture. For each individual patient, the Visual Analogue pain Scale (VAS) before sacroplasty and at 1, 4, 24 and 48weeks after the procedure was obtained. Furthermore, the use of analgesics (narcotic/non-narcotic) along with the evolution of post-interventional patient mobility before and after sacroplasty was also recorded. The mean pre-procedure VAS was 8 ± 1.9 (range, 2 to 10). This rapidly and significantly (P < 0.001) declined in the first week after the procedure (mean 4 ± 1.4; range, 1 to 7) followed by a gradual and significant (P < 0.001) decrease along the rest of the follow-up period at 4weeks (mean 3 ± 1.1; range, 1 to 5), 24weeks (mean 2.2 ± 1.1; range, 1 to 5) and 48weeks (mean 1.6 ± 1.1; range, 1 to 5). Eleven (58%) patients were under narcotic analgesia before sacroplasty, whereas 8 (42%) patients were using non-narcotics. Corresponding values after the procedure were 2/19 (10%; narcotic, one of them was on reserve) and 10/19 (53%; non-narcotic). The remaining 7 (37%) patients did not address post-procedure analgesic use. The evolution of post-interventional mobility was favourable in the study group as they revealed a significant improvement in their mobility point scale (P < 0.001). Long-axis percutaneous sacroplasty is a suitable, minimally invasive treatment option for patients who present with sacral insufficiency fractures. More studies with larger patient numbers are needed to explore any unrecognised limitations of this therapeutic approac

Optimal 3-T MRI for depiction of the finger A2 pulley: comparison between T1-weighted, fat-saturated T2-weighted and gadolinium-enhanced fat-saturated T1-weighted sequences

Objective: To compare three spin-echo sequences, transverse T1-weighted (T1WI), transverse fat-saturated (FS) T2-weighted (T2WI), and transverse gadolinium-enhanced (Gd) FS T1WI, for the visualisation of normal and abnormal finger A2 pulley with magnetic resonance (MR) imaging at 3 tesla (T). Materials and methods: Sixty-three fingers from 21 patients were consecutively investigated. Two musculoskeletal radiologists retrospectively compared all sequences to assess the visibility of normal and abnormal A2 pulleys and the presence of motion or ghost artefacts. Results: Normal and abnormal A2 pulleys were visible in 94% (59/63) and 95% (60/63) on T1WI sequences, in 63% (40/63) and 60% (38/63) on FS T2WI sequences, and in 87% (55/63) and 73% (46/63) on Gd FS T1WI sequences when read by the first and second observer, respectively. Motion and ghost artefacts were higher on FS T2WI sequences. Seven among eight abnormal A2 pulleys were detected, and were best depicted with Gd FS T1WI sequences in 71% (5/7) and 86% (6/7) by the first and the second observer, respectively. Conclusion: In 3-T MRI, the comparison between transverse T1WI, FS T2WI, and Gd FS T1WI sequences shows that transverse T1WI allows excellent depiction of the A2 pulley, that FS T2WI suffers from a higher rate of motion and ghost artefacts, and transverse Gd FS T1WI is the best sequence for the depiction of abnormal A2 pulle

Direct magnetic resonance arthrography of the knee: utility of axial traction

The purpose of this study was to determine the impact of axial traction during acquisition of direct magnetic resonance (MR) arthrography examination of the knee in terms of joint space width and amount of contrast material between the cartilage surfaces. Direct knee MR arthrography was performed in 11 patients on a 3-T MR imaging unit using a T1-weighted isotropic gradient echo sequence in a coronal plane with and without axial traction of 15kg. Joint space widths were measured at the level of the medial and the lateral femorotibial joint with and without traction. The amount of contrast material in the medial and lateral femorotibial joint was assessed independently by two musculoskeletal radiologists in a semiquantitative manner using three grades (‘absence of surface visualization, ‘partial surface visualization or ‘complete surface visualization'). With traction, joint space width increased significantly at the lateral femorotibial compartment (mean = 0.55mm, p = 0.0105) and at the medial femorotibial compartment (mean = 0.4mm, p = 0.0124). There was a trend towards an increased amount of contrast material in the femorotibial compartment with axial traction. Direct MR arthrography of the knee with axial traction showed a slight and significant increase of the width of the femorotibial compartment with a trend towards more contrast material between the articular cartilage surface

Assessment of occlusive arterial disease of abdominal aorta and lower extremities arteries: value of multidetector CT angiography using an adaptive acquisition method

We evaluated 16-detector-row CT in the assessment of occlusive peripheral arterial disease (PAD) of the abdominal aorta and lower extremities using an adaptive method of acquisition to optimise arterial enhancement especially for the distal foot arteries. Thirty-four patients underwent transcatheter angiography (TCA) and CT angiography within 15days. For each patient, table speed and rotation were selected according to the calculated optimal transit time of contrast material obtained after a single bolus test and two dynamic acquisitions at aorta and popliteal arteries. Analysis included image quality and detection of stenosis equal or greater than 50% on a patient basis and on an arterial segment basis. Sensitivity and specificity of CT were calculated with the TCA considered as the standard of reference. CT was conclusive in all segments with no technical failures even in difficult cases with occluded bypasses and aneurysms. On patient-basis analysis, the overall sensitivity and specificity to detect significant stenosis greater than 50% were both 100%. Segmental analysis shows high values of sensitivity and specificity ranging from 91 to 100% and from 81 to 100%, respectively, including distal pedal arteries. Sixteen-detector-row CT angiography using an adaptive acquisition improves the image quality and provides a reliable non-invasive technique to assess occlusive peripheral arterial disease, including distal foot arterie

Arbeitspapier "Operationalisierung funktionierende Ökologische Infrastruktur"

Die Ökologische Infrastruktur (ÖI) ist für die Erhaltung und Förderung der Biodiversität unerlässlich und stellt lebenswichtige Leistungen für den Menschen bereit. ÖI basieren auf natürlichen und halbnatürlichen Lebensräumen. Die Entwicklung und der Schutz solcher ÖI wurden als zentrale Schritte für den Erfolg der Strategie Biodiversität Schweiz (SBS) identifiziert. Konzepte wie «Grüne Infrastruktur» oder «Naturbasierte Lösungen (Nature-based Solutions)», die sich auf ÖI beziehen, haben sich in den letzten Jahrzehnten zunehmend etabliert. Ihre teils unterschiedlichen Sichtweisen erschweren jedoch eine klare Anwendung in der Praxis. Dieses Arbeitspapier ist eine literaturbasierte Auslegeordnung und stellt verschiedene Zugänge zur Operationalisierung einer «funktionierenden» ÖI vor. Für das Projekt ValPar.CH ist das Arbeitspapier eine wichtige Grundlage für ein gemeinsames Begriffsverständnis im Projektteam. Das Forschungsteam wird das Funktionieren einer ÖI sowohl aufgrund ökologischer Aspekte (Module A), wie auch basierend auf den gesellschaftlichen und wirtschaftlichen Nutzen der ÖI (Module B) und deren langfristige Sicherung durch verschiedene «policy»-Mechanismen (Module D) beurteilen. Darauf aufbauen wird das Team Empfehlungen für die Sicherstellung einer funktionierenden ÖI erarbeiten. Ecological infrastructure (EI) is essential for the conservation and promotion of biodiversity and provides vital services for humans. EI is based on natural and semi-natural habitats. The development and protection of EI have been identified as key steps for the success of the Swiss Biodiversity Strategy (SBS). Concepts such as "Green Infrastructure" or "Nature-based Solutions", which refer to EI, have become increasingly established in recent decades. However, their partly different perspectives make application in practice difficult. This working paper is a literature-based overview and presents different approaches to the operationalization of a "functioning" EI. For the ValPar.CH project, this working paper is an important basis for arriving at a common understanding of the term within the project team. The research team will assess the functioning of an EI based on ecological aspects (Module A), as well as based on the societal and economic benefits of the EI (Module B) and its long-term safeguarding through different "policy" mechanisms (Module D). Based on this, the team will develop recommendations for ensuring a functioning EI