Developing the Technique of Measurements of Magnetic Field in the CMS Steel Yoke Elements With Flux-Loops and Hall Probes

Compact muon solenoid (CMS) is a general-purpose detector designed to run at the highest luminosity at the CERN large hadron collider (LHC). Its distinctive features include a 4 T superconducting solenoid with 6 m diameter by 12.5 m long free bore, enclosed inside a 10000-ton return yoke made of construction steel. Accurate characterization of the magnetic field everywhere in theCMSdetector, including the large ferromagnetic parts of the yoke, is required. To measure the field in and around ferromagnetic parts, a set of flux-loops and Hall probe sensors will be installed on several of the steel pieces. Fast discharges of the solenoid during system commissioning tests will be used to induce voltages in the flux-loops that can be integrated to measure the flux in the steel at full excitation of the solenoid. The Hall sensors will give supplementary information on the axial magnetic field and permit estimation of the remanent field in the steel after the fast discharge. An experimental R&D program has been undertaken, using a test flux-loop, two Hall sensors, and sample disks made from the same construction steel used for the CMS magnet yoke. A sample disc, assembled with the test flux-loop and the Hall sensors, was inserted between the pole tips of a dipole electromagnet equipped with a computer-controlled power supply to measure the excitation of the steel from full saturation to zero field. The results of the measurements are presented and discussed.Comment: 6 pages, 8 figures, 6 reference

3D Magnetic Analysis of the CMS Magnet

The CMS magnetic system consists of a super-conducting solenoid coil, 12.5 m long and 6 m free bore diameter, and of an iron flux-return yoke, which includes the central barrel, two end-caps and the ferromagnetic parts of the hadronic forward calorimeter. The magnetic flux density in the center of the solenoid is 4 T. To carry out the magnetic analysis of the CMS magnetic system, several 3D models were developed to perform magnetic field and force calculations using the Vector Fields code TOSCA. The analysis includes a study of the general field behavior, the calculation of the forces on the coil generated by small axial, radial displacements and angular tilts, the calculation of the forces on the ferromagnetic parts, the calculation of the fringe field outside the magnetic system, and a study of the field level in the chimneys for the current leads and the cryogenic lines. A procedure to reconstruct the field inside a cylindrical volume starting from the values of the magnetic flux density on the cylinder surface is considered. Special TOSCA-GEANT interface tools have being developed to input the calculated magnetic field into the detector simulation package.Comment: 4 pages, 6 figures, 1 equation, 14 reference

Analysis of eddy current distributions in the CMS magnet yoke during the solenoid discharge

Flux loops have been installed on selected segments of the magnetic flux return yoke of the 4 T superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN. Voltages induced in the loops during discharge of the solenoid will be sampled online during the entire discharge and integrated offline to provide a measurement of the initial magnetic flux density in steel at the maximum field to an accuracy of a few percent. Although the discharge of the solenoid is rather slow (190 s time constant), the influence of eddy currents induced in the yoke elements should be estimated. The calculation of eddy currents is performed with Vector Fields' program ELEKTRA. The results of the calculations are reported.Flux loops have been installed on selected segments of the magnetic flux return yoke of the 4 T superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN. Voltages induced in the loops during discharge of the solenoid will be sampled online during the entire discharge and integrated offline to provide a measurement of the initial magnetic flux density in steel at the maximum field to an accuracy of a few percent. Although the discharge of the solenoid is rather slow (190 s time constant), the influence of eddy currents induced in the yoke elements should be estimated. The calculation of eddy currents is performed with Vector Fields' program ELEKTRA. The results of the calculations are reported

"Outside, it is snowing": Experience and finitude in the nonrepresentational landscapes of Alain Robbe-Grillet

Copyright © 2008 PionRomanillos J L, 2008. The definitive, peer-reviewed and edited version of this article is published in Environment and Planning D: Society and Space 26(5) 795 – 822 DOI: 10.1068/d6207This paper presents and explicates the anonymous and impersonal spatialities tentatively mapped in the novels of Alain Robbe-Grillet. Emerging from the kinds of landscapes and visualities articulated, these spatialities are at odds with the kind of anthropocentrism characteristic of phenomenological narratives of spatial experience that would start from an apparently stable human-subject position. It is argued that his body of literature dismantles the anthropocentric narratives and biographies that would produce in both the space of the world and the ‘phenomenological subject’ an unwarranted depth and naturalism. Importantly, and reflecting the theoretical turn towards the being of language, Robbe-Grillet questions the legitimacy of linguistic subjects to capture the spaces of the visible. As such, it is argued that his literature reflects an experience of the critiques of phenomenology. Importantly, this ‘critique’ goes hand in hand with the kinds of spatialities and landscapes that are rendered in the novels—the indefinite perspectives they open up, the paradoxical visualities they sustain or deny, and the disorientation they inject into the heart of spatial experience. These literary effects produce a nonanthropocentric and nonpersonal spatiality which, although contributing to an erasure of the ‘subject’, at the same time expose and open up a sociospatiality based on singularities, intensities, and finitude

Characterizing photonic crystal waveguides with an expanded k-space evanescent coupling technique

We demonstrate a direct, single measurement technique for characterizing the dispersion of a photonic crystal waveguide (PCWG) using a tapered fiber evanescent coupling method. A highly curved fiber taper is used to probe the Fabry-Pérot spectrum of a closed PCWG over a broad k-space range, and from this measurement the dispersive properties of the waveguide can be found. Waveguide propagation losses can also be estimated from measurements of closed waveguides with different lengths. The validity of this method is demonstrated by comparing the results obtained on a 'W1' PCWG in chalcogenide glass with numerical simulation. © 2008 Optical Society of America

Evidence of suppression of onchocerciasis transmission in the Venezuelan Amazonian focus.

BACKGROUND: The World Health Organization (WHO) has set goals for onchocerciasis elimination in Latin America by 2015. Most of the six previously endemic countries are attaining this goal by implementing twice a year (and in some foci, quarterly) mass ivermectin (Mectizan®) distribution. Elimination of transmission has been verified in Colombia, Ecuador and Mexico. Challenges remain in the Amazonian focus straddling Venezuela and Brazil, where the disease affects the hard-to-reach Yanomami indigenous population. We provide evidence of suppression of Onchocerca volvulus transmission by Simulium guianense s.l. in 16 previously hyperendemic Yanomami communities in southern Venezuela after 15 years of 6-monthly and 5 years of 3-monthly mass ivermectin treatment. METHODS: Baseline and monitoring and evaluation parasitological, ophthalmological, entomological and serological surveys were conducted in selected sentinel and extra-sentinel communities of the focus throughout the implementation of the programme. RESULTS: From 2010 to 2012–2015, clinico-parasitological surveys indicate a substantial decrease in skin microfilarial prevalence and intensity of infection; accompanied by no evidence (or very low prevalence and intensity) of ocular microfilariae in the examined population. Of a total of 51,341 S. guianense flies tested by PCR none had L3 infection (heads only). Prevalence of infective flies and seasonal transmission potentials in 2012–2013 were, respectively, under 1 % and 20 L3/person/transmission season. Serology in children aged 1–10 years demonstrated that although 26 out of 396 (7 %) individuals still had Ov-16 antibodies, only 4/218 (2 %) seropositives were aged 1–5 years. CONCLUSIONS: We report evidence of recent transmission and morbidity suppression in some communities of the focus representing 75 % of the Yanomami population and 70 % of all known communities. We conclude that onchocerciasis transmission could be feasibly interrupted in the Venezuelan Amazonian focus. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13071-016-1313-z) contains supplementary material, which is available to authorized users

Four problems regarding representable functors

Let $R$, $S$ be two rings, $C$ an $R$-coring and ${}_{R}^C{\mathcal M}$ the category of left $C$-comodules. The category ${\bf Rep}\, ( {}_{R}^C{\mathcal M}, {}_{S}{\mathcal M} )$ of all representable functors ${}_{R}^C{\mathcal M} \to {}_{S}{\mathcal M}$ is shown to be equivalent to the opposite of the category ${}_{R}^C{\mathcal M}_S$. For $U$ an $(S,R)$-bimodule we give necessary and sufficient conditions for the induction functor $U\otimes_R - : {}_{R}^C\mathcal{M} \to {}_{S}\mathcal{M}$ to be: a representable functor, an equivalence of categories, a separable or a Frobenius functor. The latter results generalize and unify the classical theorems of Morita for categories of modules over rings and the more recent theorems obtained by Brezinski, Caenepeel et al. for categories of comodules over corings.Comment: 16 pages, the second versio