Polaroid film helps locate objects in inaccessible areas quickly

Polaroid film is used with conventional portable X ray equipment to locate and shoot items or objects in difficult areas. Polaroid film development time is about 20 seconds

An investigation into pilot and system response to critical in-flight events. Volume 1: Executive summary

Critical in-flight events (CIFE) that threaten the aircraft were studied. The scope of the CIFE was described and defined with emphasis on characterizing event development, detection and assessment; pilot information requirements, sources, acquisition, and interpretation, pilot response options, decision processed, and decision implementation and event outcome. Detailed scenarios were developed for use in simulators and paper and pencil testing for developing relationships between pilot performance and background information as well as for an analysis of pilot reaction decision and feedback processes. Statistical relationships among pilot characteristics and observed responses to CIFE's were developed

An investigation into pilot and system response to critical in-flight events. Volume 2: Appendix

Materials relating to the study of pilot and system response to critical in-flight events (CIFE) are given. An annotated bibliography and a trip summary outline are presented, as are knowledge surveys with accompanying answer keys. Performance profiles of pilots and performance data from the simulations of CIFE's are given. The paper and pencil testing materials are reproduced. Conditions for the use of the additive model are discussed. A master summary of data for the destination diversion scenario is given. An interview with an aircraft mechanic demonstrates the feasibility of system problem diagnosis from a verbal description of symptoms and shows the information seeking and problem solving logic used by an expert to narrow the list of probable causes of aircraft failure

Outer planet probe engineering model structural tests

A series of proof of concept structural tests was performed on an engineering model of the Outer Planets Atmospheric Entry Probe. The tests consisted of pyrotechnic shock, dynamic and static loadings. The tests partially verified the structural concept

A study of ASRS reports involving general aviation and weather encounters

Consideration is given to the nature and characteristics of problems involving dissemination of weather information, use of this information by pilots, its adequacy for the purpose intended, the ability of the air traffic control system to cope with weather related incidents, and the various aspects of pilot behavior, aircraft equipment, and NAVAIDS affecting flights in which weather figures. It is concluded from the study that skill and training deficiencies of general aviation pilots are not major factors in weather related occurrences, nor is lack of aircraft equipment. Major problem causes are identified with timely and easily interpreted weather information, judgement and attitude factors of pilots, and the functioning of the air traffic control system

Statistical quality control applied to a telemetry system acceptance prodedure Technical report no. 13

Statistical quality control applied to telemetry system acceptance procedur

Systematic review of the current status of cadaveric simulation for surgical training

Background: There is growing interest in and provision of cadaveric simulation courses for surgical trainees. This is being driven by the need to modernize and improve the efficiency of surgical training within the current challenging training climate. The objective of this systematic review is to describe and evaluate the evidence for cadaveric simulation in postgraduate surgical training. Methods: A PRISMA‐compliant systematic literature review of studies that prospectively evaluated a cadaveric simulation training intervention for surgical trainees was undertaken. All relevant databases and trial registries were searched to January 2019. Methodological rigour was assessed using the widely validated Medical Education Research Quality Index (MERSQI) tool. Results: A total of 51 studies were included, involving 2002 surgical trainees across 69 cadaveric training interventions. Of these, 22 assessed the impact of the cadaveric training intervention using only subjective measures, five measured impact by change in learner knowledge, and 23 used objective tools to assess change in learner behaviour after training. Only one study assessed patient outcome and demonstrated transfer of skill from the simulated environment to the workplace. Of the included studies, 67 per cent had weak methodology (MERSQI score less than 10·7). Conclusion: There is an abundance of relatively low‐quality evidence showing that cadaveric simulation induces short‐term skill acquisition as measured by objective means. There is currently a lack of evidence of skill retention, and of transfer of skills following training into the live operating theatre

Enhancing the heavy Higgs signal with jet-jet profile cuts

The jet-jet profile, or detailed manner, in which transverse energy and mass are distributed around the jet-jet system resulting from the hadronic decay of a $Z$ boson in the process Higgs$\to ZZ$ at a proton-proton collider energy of 40\tev is carefully examined. Two observables are defined that can be used to help distinguish the $\ell^+\ell^-$-jet-jet signal from Higgs decay from the ``ordinary'' QCD background arising from the large transverse momentum production of single $Z$ bosons plus the associated jets. By making cuts on these observables, signal to background enhancement factors greater than $100$ can be obtained.Comment: 16 pages, Univ. Florida IFT-93-

Automated Rapid Prototyping of 3D Ceramic Parts

An automated system of manufacturing equipment produces three-dimensional (3D) ceramic parts specified by computational models of the parts. The system implements an advanced, automated version of a generic rapid-prototyping process in which the fabrication of an object having a possibly complex 3D shape includes stacking of thin sheets, the outlines of which closely approximate the horizontal cross sections of the object at their respective heights. In this process, the thin sheets are made of a ceramic precursor material, and the stack is subsequently heated to transform it into a unitary ceramic object. In addition to the computer used to generate the computational model of the part to be fabricated, the equipment used in this process includes: 1) A commercially available laminated-object-manufacturing machine that was originally designed for building woodlike 3D objects from paper and was modified to accept sheets of ceramic precursor material, and 2) A machine designed specifically to feed single sheets of ceramic precursor material to the laminated-object-manufacturing machine. Like other rapid-prototyping processes that utilize stacking of thin sheets, this process begins with generation of the computational model of the part to be fabricated, followed by computational sectioning of the part into layers of predetermined thickness that collectively define the shape of the part. Information about each layer is transmitted to rapid-prototyping equipment, where the part is built layer by layer. What distinguishes this process from other rapid-prototyping processes that utilize stacking of thin sheets are the details of the machines and the actions that they perform. In this process, flexible sheets of ceramic precursor material (called "green" ceramic sheets) suitable for lamination are produced by tape casting. The binder used in the tape casting is specially formulated to enable lamination of layers with little or no applied heat or pressure. The tape is cut into individual sheets, which are stacked in the sheet-feeding machine until used. The sheet-feeding machine can hold enough sheets for about 8 hours of continuous operation