245 research outputs found
Direct-laser writing for subnanometer focusing and single-molecule imaging
Two-photon direct laser writing is an additive fabrication process that utilizes two-photon absorption of tightly focused femtosecond laser pulses to implement spatially controlled polymerization of a liquid-phase photoresist. Two-photon direct laser writing is capable of nanofabricating arbitrary three-dimensional structures with nanometer accuracy. Here, we explore direct laser writing for high-resolution optical microscopy by fabricating unique 3D optical fiducials for single-molecule tracking and 3D single-molecule localization microscopy. By having control over the position and three-dimensional architecture of the fiducials, we improve axial discrimination and demonstrate isotropic subnanometer 3D focusing (<0.8 nm) over tens of micrometers using a standard inverted microscope. We perform 3D single-molecule acquisitions over cellular volumes, unsupervised data acquisition and live-cell single-particle tracking with nanometer accuracy
Ultrafast generation of highly crystalline graphene quantum dots from graphite paper via laser writing
Graphene quantum dots (GQDs) are attractive fluorescent nanoparticles that have wide applicability, are inexpensive, nontoxic, photostable, water-dispersible, biocompatible and environmental-friendly. Various strategies for the synthesis of GQDs have been reported. However, simple and efficient methods of producing GQDs with control over the size of the GQDs, and hence their optical properties, are sorely needed. Herein, an ultra-fast and efficient laser writing technique is presented as a means to produce GQDs with homogeneous size from graphene produced by the instantaneous photothermal gasification and recrystallization mechanism. Controlling the laser scan speed and output power, the yield of GQDs can reach to be about 31.458 mg/s, which shows promising potential for large-scale production. The entire process eliminates the need for chemical solvents or any other reagents. Notably, the prepared laser writing produced GQDs (LWP-GQDs) exhibit blue fluorescence under UV irradiation of 365 nm and the Commission Internationale de L'Eclairage (CIE) chromaticity coordinates is measured at (0.1721, 0.123). Overall, this method exhibits superior advantages over the complex procedures and low yields required by other existing methods, and thus has great potential for the commercial applications
TagPaint: Covalent labelling of genetically encoded protein tags for DNA-PAINT imaging
Recently, DNA-PAINT single-molecule localization microscopy (SMLM) has shown great promise for quantitative imaging; however, labelling strategies thus far have relied on multivalent and affinity-based approaches. Here, the covalent labelling of expressed protein tags (SNAP tag and Halo tag) with single DNA-docking strands and application of SMLM via DNA-PAINT is demonstrated. tagPAINT is then used for T-cell receptor signalling proteins at the immune synapse as a proof of principle
How Do Cells Make Decisions: Engineering Micro- and Nanoenvironments for Cell Migration
Cell migration contributes to cancer metastasis and involves cell adhesion to the extracellular matrix (ECM), force generation through the cell's cytoskeletal, and finally cell detachment. Both adhesive cues from the ECM and soluble cues from neighbouring cells and tissue trigger intracellular signalling pathways that are essential for cell migration. While the machinery of many signalling pathways is relatively well understood, how hierarchies of different and conflicting signals are established is a new area of cellular cancer research. We examine the recent advances in microfabrication, microfluidics, and nanotechnology that can be utilized to engineer micro- and nanoscaled cellular environments. Controlling both adhesive and soluble cues for migration may allow us to decipher how cells become motile, choose the direction for migration, and how oncogenic transformations influences these decision-making processes
Light Activated Electrochemistry: Light Intensity and pH Dependence on Electrochemical Performance of Anthraquinone Derivatized Silicon
We seek to understand how the thermodynamics and kinetics of anthraquinone-containing self-assembled monolayer on silicon electrodes are affected by two key experimental variables: the intensity of the light assisting the anthraquinone/anthrahydroquinone redox process and the local solution environment. The substrates are chemically passivated poorly doped p-type silicon electrodes. The study presents a strategy for the selective modulation of either the anodic or the cathodic process occurring at the interface. Cyclic voltammetry studies showed that unlike for a proton-coupled electron transfer process performed at metallic electrodes, for the redox reaction of the anthraquinone unit on a silicon electrode it becomes possible to (i) selectively facilitate only the oxidation process by increasing the electrolyte pH or (ii) at a given pH value to increase the illumination intensity to anodically shift the onset of the reduction step only but leave the oxidation process thermodynamic unchanged. A model concerning the proton coupled electron transfer mechanism was proposed, where the electron transfer is the rate-determining step for the anthraquinone reduction while a deprotonation step is the rate-determining event for the anthrahydroquinone oxidation on poorly doped illuminated p-type silicon
Proximity extension of circular DNA aptamers with real-time protein detection
Multivalent circular aptamers or ‘captamers’ have recently been introduced through the merger of aptameric recognition functions with the basic principles of DNA nanotechnology. Aptamers have strong utility as protein-binding motifs for diagnostic applications, where their ease of discovery, thermal stability and low cost make them ideal components for incorporation into targeted protein assays. Here we report upon a property specific to circular DNA aptamers: their intrinsic compatibility with a highly sensitive protein detection method termed the ‘proximity extension’ assay. The circular DNA architecture facilitates the integration of multiple functional elements into a single molecule: aptameric target recognition, nucleic acid hybridization specificity and rolling circle amplification. Successful exploitation of these properties is demonstrated for the molecular analysis of thrombin, with the assay delivering a detection limit nearly three orders of magnitude below the dissociation constants of the two contributing aptamer–thrombin interactions. Real-time signal amplification and detection under isothermal conditions points towards potential clinical applications, with both fluorescent and bioelectronic methods of detection achieved. This application elaborates the pleiotropic properties of circular DNA aptamers beyond the stability, potency and multitargeting characteristics described earlier
Light-Activated Electrochemistry for the Two-Dimensional Interrogation of Electroactive Regions on a Monolithic Surface with Dramatically Improved Spatial Resolution
The concept of light-activated electrochemistry (LAE) was recently presented where faradaic electrochemistry could be spatially resolved on a monolithic silicon electrode by illuminating the specific region with light. A major implication from the previous study using illumination from the nonsolution side, or backside, is that the spatial resolution is limited by the finite thickness of silicon wafer. To overcome this restriction, and enable the further application of LAE, in combination with optical imaging for example, herein the spatial resolution of LAE using topside illumination (illumination from the solution side) is explored. The applied potential and irradiated light intensity are found to have significant effects on the spatial resolution. A spatial resolution of ~30 µm was achieved with optimal parameters, which is a 20 times improvement compared with the previously reported backside illumination design, demonstrating the potential application of the strategy including microarray patterning of silicon or for single cell analysis
A novel route to copper(ii) detection using \u27click\u27 chemistry-induced aggregation of gold nanoparticles
A simple colorimetric method for the detection of copper ions in water is described. This method is based on the \u27click\u27 copper(i)-catalyzed azide-alkyne cycloaddition reaction and its use in promoting the aggregation of azide-tagged gold nanoparticles by a dialkyne cross-linker is described. Nanoparticle cross-linking, evidenced as a colour change, is used for the detection of copper ions. The lowest detected concentration by the naked eye was 1.8 μM, with the response linear with log(concentration) between 1.8-200 μM. The selectivity relative to other potentially interfering ions was evaluated
Precise, high-throughput production of multicellular spheroids with a bespoke 3D bioprinter
3D in vitro cancer models are important therapeutic and biological discovery tools, yet formation of multicellular spheroids in a throughput and highly controlled manner to achieve robust and statistically relevant data, remains challenging. Here, we developed an enabling technology consisting of a bespoke drop-on-demand 3D bioprinter capable of high-throughput printing of 96-well plates of spheroids. 3D-multicellular spheroids are embedded inside a tissue-like matrix with precise control over size and cell number. Application of 3D bioprinting for high-throughput drug screening was demonstrated with doxorubicin. Measurements showed that IC 50 values were sensitive to spheroid size, embedding and how spheroids conform to the embedding, revealing parameters shaping biological responses in these models. Our study demonstrates the potential of 3D bioprinting as a robust high-throughput platform to screen biological and therapeutic parameters. Significance Statement In vitro 3D cell cultures serve as more realistic models, compared to 2D cell culture, for understanding diverse biology and for drug discovery. Preparing 3D cell cultures with defined parameters is challenging, with significant failure rates when embedding 3D multicellular spheroids into extracellular mimics. Here, we report a new 3D bioprinter we developed in conjunction with bioinks to allow 3D-multicellular spheroids to be produced in a high-throughput manner. High-throughput production of embedded multicellular spheroids allowed entire drug-dose responses to be performed in 96-well plate format with statistically relevant numbers of data points. We have deconvoluted important parameters in drug responses including the impact of spheroid size and embedding in an extracellular matrix mimic on IC 50 values
A covalently crosslinked bioink for multi-materials drop-on-demand 3D bioprinting of three-dimensional cell cultures
In vitro three-dimensional (3D) cell models have been accepted to better recapitulate aspects of in vivo organ environment than 2D cell culture. Currently, the production of these complex in vitro 3D cell models with multiple cell types and microenvironments remains challenging and prone to human error. Here we report a versatile bioink comprised of a 4-arm PEG based polymer with distal maleimide derivatives as the main ink component and a bis-thiol species as the activator that crosslinks the polymer to form the hydrogel in less than a second. The rapid gelation makes the polymer system compatible with 3D bioprinting. The ink is combined with a drop-on-demand 3D bioprinting platform consisting of eight independently addressable nozzles and high-throughput printing logic for creating complex 3D cell culture models. The combination of multiple nozzles and fast printing logic enables the rapid preparation of many complex 3D structures comprising multiple hydrogel environments in the one structure in a standard 96-well plate format. The platform compatibility for biological applications was validated using pancreatic ductal adenocarcinoma cancer (PDAC) cells with their phenotypic responses controlled by tuning the hydrogel microenvironment
- …