Impact of an AGN featureless continuum on estimation of stellar population properties

The effect of the featureless power-law (PL) continuum of an active galactic nucleus (AGN) on the estimation of physical properties of galaxies with optical population spectral synthesis (PSS) remains largely unknown. With this in mind, we fit synthetic galaxy spectra representing a wide range of galaxy star formation histories (SFHs) and including distinct PL contributions of the form $F_{\nu} \propto \nu^{-\alpha}$ with the PSS code STARLIGHT to study to which extent various inferred quantities (e.g. stellar mass, mean age, and mean metallicity) match the input. The synthetic spectral energy distributions (SEDs) computed with our evolutionary spectral synthesis code include an AGN PL component with $0.5 \leq \alpha \leq 2$ and a fractional contribution $0.2 \leq x_{\mathrm{AGN}} \leq 0.8$ to the monochromatic flux at 4020 \AA. At the empirical AGN detection threshold $x_{\mathrm{AGN}}\simeq 0.26$ that we previously inferred in a pilot study on this subject, our results show that the neglect of a PL component in spectral fitting can lead to an overestimation by $\sim$2 dex in stellar mass and by up to $\sim$1 and $\sim$4 dex in the light- and mass-weighted mean stellar age, respectively, whereas the light- and mass-weighted mean stellar metallicity are underestimated by up to $\sim$0.3 and $\sim$0.6 dex, respectively. Other fitting set-ups including either a single PL or multiple PLs in the base reveal, on average, much lower unsystematic uncertainties of the order of those typically found when fitting purely stellar SEDs with stellar templates, however, reaching locally up to $\sim$1, 3 and 0.4 dex in mass, age and metallicity, respectively. Our results underscore the importance of an accurate modelling of the AGN spectral contribution in PSS fits as a minimum requirement for the recovery of the physical and evolutionary properties of stellar populations in active galaxies.Comment: 18 pages, 22 figures, accepted for publication in A&

Conservation laws arising in the study of forward-forward Mean-Field Games

We consider forward-forward Mean Field Game (MFG) models that arise in numerical approximations of stationary MFGs. First, we establish a link between these models and a class of hyperbolic conservation laws as well as certain nonlinear wave equations. Second, we investigate existence and long-time behavior of solutions for such models

Semi-empirical analysis of Sloan Digital Sky Survey galaxies: II. The bimodality of the galaxy population revisited

We revisit the bimodal distribution of the galaxy population commonly seen in the local universe. Here we address the bimodality observed in galaxy properties in terms of spectral synthesis products, such as mean stellar ages and stellar masses, derived from the application of this powerful method to a volume-limited sample, with magnitude limit cutoff M_r = -20.5, containing about 50 thousand luminous galaxies from the SDSS Data Release 2. In addition, galaxies are classified according to their emission line properties in three distinct spectral classes: star-forming galaxies, with young stellar populations; passive galaxies, dominated by old stellar populations; and, hosts of active nuclei, which comprise a mix of young and old stellar populations. We show that the extremes of the distribution of some galaxy properties, essentially galaxy colours, 4000 A break index, and mean stellar ages, are associated to star-forming galaxies at one side, and passive galaxies at another. We find that the mean light-weighted stellar age of galaxies is the direct responsible for the bimodality seen in the galaxy population. The stellar mass, in this view, has an additional role since most of the star-forming galaxies present in the local universe are low-mass galaxies. Our results also give support to the existence of a 'downsizing' in galaxy formation, where massive galaxies seen nowadays have stellar populations formed at early times.Comment: 18 pages, 19 figures, accepted for publication in MNRA

Comparison of the efficacy of natural-based and synthetic biocides to disinfect silicone and stainless steel surfaces

New biocidal solutions are needed to combat effectively the evolution of microbes developing antibiotic resistance while having a low or no environmental toxicity impact. This work aims to assess the efficacy of commonly used biocides and natural-based compounds on the disinfection of silicone and stainless steel (SS) surfaces seeded with different Staphylococcus aureus strains. Minimum inhibitory concentration was determined for synthetic (benzalkonium chloride-BAC, glutaraldehyde-GTA, ortho-phthalaldehyde-OPA and peracetic acid-PAA) and natural-based (cuminaldehyde-CUM), eugenol-EUG and indole-3-carbinol-I3C) biocides by the microdilution method. The efficacy of selected biocides at MIC, 10×MIC and 5500 mg/L (representative in-use concentration) on the disinfection of sessile S. aureus on silicone and SS was assessed by viable counting. Silicone surfaces were harder to disinfect than SS. GTA, OPA and PAA yielded complete CFU reduction of sessile cells for all test concentrations as well as BAC at 10×MIC and 5500 mg/L. CUM was the least efficient compound. EUG was efficient for SS disinfection, regardless of strains and concentrations tested. I3C at 10×MIC and 5500 mg/L was able to cause total CFU reduction of silicone and SS deposited bacteria. Although not so efficient as synthetic compounds, the natural-based biocides are promising to be used in disinfectant formulations, particularly I3C and EUG

Phytochemical profiling as a solution to palliate disinfectant limitations

The indiscriminate use of biocides for general disinfection has contributed to the increased incidence of antimicrobial tolerant microorganisms. This study aims to assess the potential of seven phytochemicals (tyrosol, caffeic acid, ferulic acid, cinnamaldehyde, coumaric acid, cinnamic acid and eugenol) in the control of planktonic and sessile cells of Staphylococcus aureus and Escherichia coli. Cinnamaldehyde and eugenol showed antimicrobial properties, minimum inhibitory concentrations of 3-5 and 5-12 mM and minimum bactericidal concentrations of 10-12 and 10-14 mM against S. aureus and E. coli, respectively. Cinnamic acid was able to completely control adhered bacteria with effects comparable to peracetic acid and sodium hypochlorite and it was more effective than hydrogen peroxide (all at 10 mM). This phytochemical caused significant changes in bacterial membrane hydrophilicity. The observed effectiveness of phytochemicals makes them interesting alternatives and/or complementary products to commonly used biocidal products. Cinnamic acid is of particular interest for the control of sessile cells

Studies on the redox centers of the terminal oxidase from Desulfovibrio gigas and evidence for its interaction with rubredoxin

Abstract: Rubredoxin-oxygen oxidoreductase (ROO) is the final component of a soluble electron transfer chain that couples NADH oxidation to oxygen consumption in the anaerobic sulfate reducer Desulfovibrio gigas. It is an 86-kDa homodimeric flavohemeprotein containing two FAD molecules, one mesoheme IX, and one Fe-uroporphyrin I per monomer, capable of fully reducing oxygen to water. EPR studies on the native enzyme reveal two components with g values at similar to 2.46, 2.29, and 1.89, which are assigned to low spin hemes and are similar to the EPR features of P-450 hemes, suggesting that ROO hemes have a cysteinyl axial ligation. At pH 7.6, the flavin redox transitions occur at 0 +/- 15 mV for the quinone/semiquinone couple and at -130 +/- 15 mV for the semiquinone/hydroquinone couple; the hemes reduction potential is -350 +/- 15 mV. Spectroscopic studies provided unequivocal evidence that the flavins are the electron acceptor centers from rubredoxin, and that their reduction proceed through an anionic semiquinone radical. The reaction with oxygen occurs in the flavin moiety. These data are strongly corroborated by the finding that rubredoxin and ROO are located in the same polycistronic unit of D. gigas genome. For the first time, a clear role for a rubredoxin in a sulfate-reducing bacterium is presented

The ‘strict’ anaerobe Desulfovibrio gigas contains a membrane-bound oxygen-reducing respiratory chain

AbstractSulfate-reducing bacteria are considered as strict anaerobic microorganisms, in spite of the fact that some strains have been shown to tolerate the transient presence of dioxygen. This report shows that membranes from Desulfovibrio gigas grown in fumarate/sulfate contain a respiratory chain fully competent to reduce dioxygen to water. In particular, a membrane-bound terminal oxygen reductase, of the cytochrome bd family, was isolated, characterized, and shown to completely reduce oxygen to water. This oxidase has two subunits with apparent molecular masses of 40 and 29 kDa. Using NADH or succinate as electron donors, the oxygen respiratory rates of D. gigas membranes are comparable to those of aerobic organisms (3.2 and 29 nmol O2 min−1 mg protein−1, respectively). This ‘strict anaerobic’ bacterium contains all the necessary enzymatic complexes to live aerobically, showing that the relationships between oxygen and anaerobes are much more complex than originally thought

Método del papel de filtro para la medida de la succión del suelo

The capillary pressure of the soil (i.e., the pressure difference between air and water components in soil voids) is a key variable in the analysis of the hydro-mechanical behavior of unsaturated soils. Therefore a simple and economical laboratory method for the measurement of the capillary pressure of the soil (also known as soil matric suction, the reference being the atmospheric pressure), even if a degree of approximation is involved, is of considerable value. The filter paper method calculates soil suction indirectly by measuring the gravimetric water content of the filter paper at equilibrium that is related to soil suction through a predetermined calibration curve. The advantages of the method are simplicity, economy and reasonable accuracy. It can be used to measure suctions from 10 to 30000 kPa. In this paper, the authors use the contact filter paper method for matric suction measurements of an unsaturated compacted silty sand (formed by the weathering of granite) which has been used as a building material for a road in the north of Portugal. The matric suctions inferred from filter paper measurements depend on the calibration between the water content of the filter paper and suction. Therefore, three calibration curves proposed at the literature (Chandler et al. 1992; ASTM D 5298; and Oliveira & Marinho 2006) for the Whatman 42 filter paper are used to interpret the measured filter paper gravimetric water contents. The results of these tests are compared to other techniques (i.e., tensiometers, and the osmotic technique) used to measure or control the negative pore water pressure in the compacted soil specimens and the results obtained are reasonably accurate.La presión capilar del suelo (es decir, la diferencia de la presión entre el aire y los componentes del agua en vacíos del suelo) es una variable llave en el análisis del comportamiento hidromecánico de suelos no saturados. Un método por lo tanto simple y económico del laboratorio para la medida de la presión capilar del suelo (también conocido como la succión matrica del suelo, la referencia que es la presión atmosférica), mesmo si un grado de aproximación está implicado, es de valor considerable. El método del papel de filtro calcula la succión indirectamente utilizando curvas de calibración. Las ventajas del método son simplicidad, economía y exactitud razonable. El método del papel de filtro se puede utilizar para medir succiones a partir del 10 al 30000 kPa. En este artículo, los autores utilizan el método del papel de filtro para la medida de la succión matric de una arena limosa compactada no saturada (formada por la meteorización del granito) que se ha utilizado como material de construcción para un camino en el norte de Portugal. Las succiones matric deducidas de medidas del papel de filtro dependen de una calibración entre el humedade del papel de filtro y la succión. Por lo tanto, tres curvas de calibración propuestas en la literatura (Chandler et al. 1992; ASTM D 5298; y Oliveira & Marinho 2006) para el papel de filtro de Whatman 42 se utilizan para interpretar lãs humedades gravimétricas medidas del papel de filtro. Los resultados de los ensayos se comparan a otras técnicas (es decir, tensiómetros, y la técnica osmótica) usadas para medir o controlar la presión negativa en lãs muestras compactadas del suelo y los resultados obtenidos sea razonablemente exacto

Efeito da calibração do papel filtro na curva de retenção de um solo arenoso siltoso compactado

The soil suction is a key variable in the analysis of the hydro-mechanical behavior of unsaturated soils. The filter paper method (FPM) calculates soil suction indirectly by measuring the gravimetric water content of the filter paper at equilibrium that is related to soil suction through a predetermined calibration curve. The matric suctions inferred from FPM depend on the calibration between the water content of the filter paper and suction. Therefore, some published calibration curves (Fawcett and Collis-George 1967; Hamblin 1981; Chandler and Gutierrez 1986; Chandler et al. 1992; ASTM D-5298 1992; and Oliveira and Marinho 2006) for the Whatman 42 filter paper are used to interpret the suction measurements of an unsaturated compacted silty sand. Experimental errors induced by using an inadequate calibration curve are discussed. The test results compared to other techniques used to measure or control suctions in the compacted soil specimens are reasonably accurate.A sucção de um solo é uma variável essencial na análise do comportamento de solos não saturados, e é necessário e importante o desenvolvimento de técnicas, diretas e indiretas, de determinação da pressão capilar de solos, que tentam aliar à simplicidade de aplicação, o que se espera ser uma precisão aceitável para os problemas reais do dia a dia da engenharia de solos. O MPF determina a sucção de forma indireta e depende da precisão em que foi determinada a curva de calibração. Várias curvas de calibração para o papel filtro Whatman 42 têm sido propostas na literatura (Fawcett and Collis-George 1967; Hamblin 1981; Chandler and Gutierrez 1986; Chandler et al. 1992; ASTM D-5298 1992; e Oliveira and Marinho 2006). Este artigo discute o uso do MPF para determinar valores de sucção de um solo arenoso siltoso compactado não saturado. Comparam-se os resultados obtidos com outras técnicas utilizadas para medir ou controlar sucções de amostras compactadas do solo arenoso siltoso e conclui-se que o MPF com adequada curva de calibração pode apresentar resultados satisfatórios.Universidade de Coimbra. Faculdade de Ciências e Tecnologia (FCT-UC)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES