New results in feedback control of unsupported standing in paraplegia

The aim of this study was to implement a new approach to feedback control of unsupported standing and to evaluate it in tests with an intact and a paraplegic subject. In our setup, all joints above the ankles are braced and stabilizing torque at the ankle is generated by electrical stimulation of the plantarflexor muscles. A previous study showed that short periods of unsupported standing with a paraplegic subject could be achieved. In order to improve consistency and reliability and to prolong the duration of standing, we have implemented several modifications to the control strategy. These include a simplified control structure and a different controller design method. While the reliability of standing is mainly limited by the muscle characteristics such as reduced strength and progressive fatigue, the results presented here show that the new strategy allows much longer periods (up to several minutes) of unsupported standing in paraplegia

A non-linear approach to modelling and control of electrically stimulated skeletal muscle

This thesis is concerned with the development and analysis of a non-linear approach to modelling and control of the contraction of electrically stimulated skeletal muscle. For muscle which has lost nervous control, artificial electrical stimulation can be used as a technique aimed at providing muscular contraction and producing a functionally useful movement. This is generally referred to as Functional Electrical Stimulation (FES) and is used in different application areas such as the rehabilitation of paralysed patient and in cardiac assistance where skeletal muscle can be used to support a failing heart. For both these FES applications a model of the muscle is essential to develop algorithms for the controlled stimulation. For the identification of muscle models, real data are available from experiments with rabbit muscle. Data for contraction with constant muscle length were collected from two muscle with very different characteristics. An empirical modelling approach is developed which is suitable for both muscles. The approach is based on a decomposition of the operating space into smaller sub-regions which are then described by local models of simple, possibly linear structure. The local models are blended together by a scheduler, and the resulting non-linear model is called a Local Model Network (LMN). It is shown how a priori knowledge about the system can be used directly when identifying Local Model Networks. Aspects of the structure selection are discussed and algorithms for the identification of the model parameters are presented. Tools of the analysis of Local Model Networks have been developed and are used to validate the models. The problem of designing a controller based on the LMN structure is discussed. The structure of Local Controller Networks is introduced. These can be derived directly from Local Model Networks. Design techniques for input-output and for state feedback controllers, based on pole placement, are presented. Aspects of the generation of optimal stimulation patterns (which are defined as stimulation patterns which deliver the smallest number of pulses to obtain a desired contraction) are discussed, and various techniques to generate them are presented. In particular, it is shown how a control structure can be used to generate optimal stimulation patterns. A Local Controller Network is used as the controller with a design based on a non-linear LMN model of muscle. Experimental data from a non-linear heat transfer process have been collected and are used to demonstrate the basic modelling and control principles throughout the first part of the thesis

Design of feedback controllers for paraplegic standing

The development, implementation and experimental evaluation of feedback systems for the control of the upright posture of paraplegic persons in standing is described. While the subject stands in a special apparatus, stabilising torque at the ankle joint is generated by electrical stimulation of the paralysed calf muscles of both legs using surface electrodes. This allows the subject to stand without the need to hold on to external supports for stability- this is termed 'unsupported standing'. Sensors in the apparatus allow independent measurement of left and right ankle moments together with measurement of the inclination angle. A nested loop structure for control of standing is implemented, where a high-bandwidth inner loop provides control of the ankle moments, while the angle controller in the outer loop regulates the inclination angle. A number of important modifications to a control strategy which was previously tested with both neurologically intact and paraplegic subjects are presented. The new strategy is described, and an experimental evaluation with intact subjects is reported. The experimental results show that the control system for unsupported standing performs reliably, and according to the design formulation. There aa-e a number of design choices, appropriate to different situations, and the practical effect of each is clear. This allows easy 'tuning' during an experimental session. This is important since the complete design procedure, from muscle dynamics identification to control design, has to be carried out as quickly as possible while the subject is standing in the apparatus. A number of recommendations are made regarding the preferred design choices for control of unsupported standing

A functional electrical stimulation system for human walking inspired by reflexive control principles

This study presents an innovative multichannel functional electrical stimulation gait-assist system which employs a well-established purely reflexive control algorithm, previously tested in a series of bipedal walking robots. In these robots, ground contact information was used to activate motors in the legs, generating a gait cycle similar to that of humans. Rather than developing a sophisticated closed-loop functional electrical stimulation control strategy for stepping, we have instead utilised our simple reflexive model where muscle activation is induced through transfer functions which translate sensory signals, predominantly ground contact information, into motor actions. The functionality of the functional electrical stimulation system was tested by analysis of the gait function of seven healthy volunteers during functional electrical stimulation–assisted treadmill walking compared to unassisted walking. The results demonstrated that the system was successful in synchronising muscle activation throughout the gait cycle and was able to promote functional hip and ankle movements. Overall, the study demonstrates the potential of human-inspired robotic systems in the design of assistive devices for bipedal walking

Upper-limb exercise in tetraplegia using functional electrical stimulation

Cervical spinal cord injury can result in dysfunction in both the lower and upper limbs (tetraplegia), andmay be accompanied by a range of secondary complications. The degree of upper-limb dysfunctiondepends upon the level and completeness of the lesion; in this paper we consider tetraplegics with a neurological level in the range C4-C6. A person with a C5- or C6-level injury will generally retain control of the shoulder and elbow flexor muscles biceps), but will have no control of the hand, wrist or elbow extensors (triceps).With a complete C4 injury voluntary control of the entire arm is lost. Thus, we propose that functional electrical stimulation (FES) of the biceps and triceps muscles may enhance the efficacy of cyclical upper-limb exercise. Alternatives for partial restoration of function include tendon transfer surgery or mechanical orthoses1. Previous FES research for C4-C6 tetraplegics has focused on systems for hand function2,3 and improved working area (i.e. overhead reach)4,5,6,7, but the provision of upper-limb exercise modalities using FES assistance has been neglected. This is important because the lack of effective exercise can lead rapidly to severe cardiopulmonary deconditioning in this population

Feedback control of unsupported standing

This paper presents the results of continuing work on feedback control of unsupported standing in paraplegia. Our experimental setup considers a situation in which all joints above the ankle are braced, and stabilising torque at the ankle is generated by stimulation of the plantarflexors. A previous study showed that short periods of unsupported standing with paraplegic subjects could be achieved. In order to improve consistency and reliability of unsupported standing we are currently investigating several modifications to the control strategy. The paper reports progress towards this goal

Automatic electrical stimulation of abdominal wall muscles increases tidal volume and cough peak flow in tetraplegia

<p>Paralysis of the respiratory muscles in people with tetraplegia affects their ability to breathe and contributes to respiratory complications. Surface functional electrical stimulation (FES) of abdominal wall muscles can be used to increase tidal volume (V_{T}) and improve cough peak flow (CPF) in tetraplegic subjects who are able to breathe spontaneously.</p> <p>This study aims to evaluate the feasibility and effectiveness of a novel abdominal FES system which generates stimulation automatically, synchronised with the subjects' voluntary breathing activity. Four subjects with complete tetraplegia (C4-C6), breathing spontaneously, were recruited.</p> <p>The automatic stimulation system ensured that consistent stimulation was achieved. We compared spirometry during unassisted and FES-assisted quiet breathing and coughing, and measured the effect of stimulation on end-tidal CO_2 (EtCO_2) during quiet breathing.</p> <p>The system dependably recognised spontaneous respiratory effort, stimulating appropriately, and was well tolerated by patients. Significant increases in V_T during quiet breathing (range 0.05–0.23 L) and in CPF (range 0.04–0.49 L/s) were observed. Respiratory rate during quiet breathing decreased in all subjects when stimulated, whereas minute ventilation increased by 1.05–2.07 L/min. The changes in EtCO_2 were inconclusive.</p> <p>The automatic stimulation system augmented spontaneous breathing and coughing in tetraplegic patients and may provide a potential means of respiratory support for tetraplegic patients with reduced respiratory capacity.</p&gt

Investigation of robotics-assisted tilt-table therapy for early-stage rehabilitation in spinal cord injury

This article provides the outcome of an investigation of robotics-assisted tilt-table therapy for early-stage rehabilitation in spinal cord injur

Abdominal functional electrical stimulation to enhance mechanical insufflation-exsufflation

Context: Respiratory complications, attributed to the build-up of secretions in the airway, are a leading cause of rehospitalisation for the tetraplegic population. Previously, we observed that the application of Abdominal Functional Electrical Stimulation (AFES) improved cough function and increased demand for secretion removal, suggesting AFES may aid secretion clearance. Clinically, secretion clearance is commonly achieved by using Mechanical insufflation-exsufflation (MI-E) to simulate a cough. In this study the feasibility of combining AFES with MI-E is evaluated. Findings: AFES was successfully combined with MI-E at eight fortnightly assessment sessions conducted with one sub-acute participant with tetraplegia. By using the signal from a pressure sensor, integrated with the MI-E device, AFES was correctly applied in synchrony with MI-E with an accuracy of 96.7%. Acute increases in exhaled volume and peak flow were observed during AFES assisted MI-E, compared to MI-E alone, at six of eight assessment sessions. Conclusion: The successful integration of AFES with MI-E at eight assessment sessions demonstrates the feasibility of this technique. The acute increases in respiratory function observed at the majority of assessment sessions generate the hypothesis that AFES assisted MI-E may be more effective for secretion clearance than MI-E alone

Arm-cranking exercise assisted by Functional Electrical Stimulation in C6 tetraplegia: a pilot study

Tetraplegic volunteers undertook progressive exercise training, using novel systems for arm-cranking exercise assisted by Functional Electrical Stimulation (FES). The main aim was to determine potential training effects of FES-assisted arm-crank ergometry (FES-ACE) on upper limb strength and cardiopulmonary {fitness} in tetraplegia. Surface FES was applied to the biceps and triceps during exercise on an instrumented ergometer. Two tetraplegic volunteers with C6 Spinal Cord Injury (SCI) went through muscle strengthening, baseline exercise testing and three months of progressive FES-ACE training. Repeat exercise tests were carried out every four weeks during training, and post-training, to monitor upper-limb strength and cardiopulmonary fitness. At each test point, an incremental test was carried out to determine peak work rate, peak oxygen uptake, gas exchange threshold and oxygen uptake-work rate relationship during FES-ACE. Peak oxygen uptake for Subject A increased from 0.7 l/min to 1.1 l/min, and peak power output increased from 7 W to 38 W after FES-ACE training. For Subject B, peak oxygen uptake was unchanged, but peak power output increased from 3 W to 8 W. These case studies illustrate potential benefits of FES-ACE in tetraplegia, but also the differences in exercise responses between individuals. Keywords: electrical stimulation; spinal cord injury; cardiopulmonary fitness; rehabilitation; tetraplegi