Provisional Assessment of Candidate High-Temperature Thermal Conductivity Reference Materials in the EMRP “Thermo” Project

This article describes the provisional assessment of a short list of four candidate high-temperature thermal conductivity reference materials in a European research project, “Thermo.” These four candidate materials are low-density calcium silicate, amorphous silica, high-density calcium silicate, and exfoliated vermiculite. Based on initial tests on material composition and microstructure changes, dimensional stability, mechanical stability, chemical stability and uniformity, the best two candidate materials that would be considered for further detailed characterization in the next stage are low-density calcium silicate and high-density calcium silicate. These two materials are dimensionally, mechanically, and chemically stable, which are more robust and easier to handle than others. However, the specimens need to be selected to meet the requirement for material uniformity in terms of density, i.e., density variation within 2%

Thermal analysis techniques for composites and adhesives

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5635(no 32) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Optimisation of corona discharge surface treatment for improved adhesive bonding using design of

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5658(25) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Latent heat of polymers crystallised under pressure

SIGLEAvailable from British Library Document Supply Centre-DSC:6180.5139(44) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Characterisation of the fibre-matrix interface by thermal analysis

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5656(060) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

International Interlaboratory Comparison of Thermogravimetric Analysis of Graphene-Related Two-Dimensional Materials.

Research on graphene-related two-dimensional (2D) materials (GR2Ms) in recent years is strongly moving from academia to industrial sectors with many new developed products and devices on the market. Characterization and quality control of the GR2Ms and their properties are critical for growing industrial translation, which requires the development of appropriate and reliable analytical methods. These challenges are recognized by International Organization for Standardization (ISO 229) and International Electrotechnical Commission (IEC 113) committees to facilitate the development of these methods and standards which are currently in progress. Toward these efforts, the aim of this study was to perform an international interlaboratory comparison (ILC), conducted under Versailles Project on Advanced Materials and Standards (VAMAS) Technical Working Area (TWA) 41 "Graphene and Related 2D Materials" to evaluate the performance (reproducibility and confidence) of the thermogravimetric analysis (TGA) method as a potential new method for chemical characterization of GR2Ms. Three different types of representative and industrially manufactured GR2Ms samples, namely, pristine few-layer graphene (FLG), graphene oxide (GO), and reduced graphene oxide (rGO), were used and supplied to ILC participants to complete the study. The TGA method performance was evaluated by a series of measurements of selected parameters of the chemical and physical properties of these GR2Ms including the number of mass loss steps, thermal stability, temperature of maximum mass change rate (Tp) for each decomposition step, and the mass contents (%) of moisture, oxygen groups, carbon, and impurities (organic and non-combustible residue). TGA measurements determining these parameters were performed using the provided optimized TGA protocol on the same GR2Ms by 12 participants across academia, industry stakeholders, and national metrology institutes. This paper presents these results with corresponding statistical analysis showing low standard deviation and statistical conformity across all participants that confirm that the TGA method can be satisfactorily used for characterization of these parameters and the chemical characterization and quality control of GR2Ms. The common measurement uncertainty for each parameter, key contribution factors were identified with explanations and recommendations for their elimination and improvements toward their implementation for the development of the ISO/IEC standard for chemical characterization of GR2Ms.Pei Lay Yap, Farzaneh Farivar, Åsa K. Jämting, Victoria A. Coleman, Sam Gnaniah, Elisabeth Mansfield, Cheng Pu, Sandra Marcela Landi, Marcus Vinícius David, Emmanuel Flahaut, Mohammed Aizane, Michael Barnes, Mary Gallerneault, M. Dominique Locatelli, Sébastien Jacquinot, Carlton Gray Slough, Jörg Menzel, Stefan Schmölzer, Lingling Ren, Andrew J. Pollard, and Dusan Losi