25 research outputs found
Vibration risk evaluation in hand-held harvesters for olives
This research aims to evaluate the vibration transmitted to the hand-arm system by two electric portable harvesters, different for size and teeth features of the harvesting head. Moreover, being the bars of the two machines telescopic, they were operated at minimum and maximum length. The acceleration was measured, at different times, in two points, 1 m apart, next to the hand positions. Finally, measurements were carried out both at no load, in standard controlled conditions, and in field, under ordinary working conditions. To smooth the influence of external factors, the machines were operated by the same operator. The results showed that the greater and heavier harvesting head produced significantly higher acceleration at no load (10.7 m/s2 vs. 5.5 m/s2), and comparable acceleration at load (13.9 vs. 14.2 m/s2). On average, the vibration was significantly higher at load (14.0 vs. 8.1 m/s2). The difference between the two bar lengths was not statistically significant: 9.4 m/s2 when using the minimum length and 9.8 m/s2 when using the maximum one. Finally, the difference between the two measuring points was affected by the bar length: it was statistically significant when using the bar at its minimum length only. As far as the components are concerned, at no load the highest acceleration was measured along the bar axis for both harvesting heads (9.2 m/s2 for the greater head and 4.2 m/s2 for the smaller one). At load all the three components were comparable in the greater head (about 7.8 m/s2) whereas the x component was predominant in the other one (11.4 vs. 4.8 (y) and 6.6 m/s2 (z))
Special Issue on Pesticide Applications in Agricultural Systems
The European Directive 2009/128/EC on the Sustainable Use of Pesticides recognizes the use of Plant Protection Products (PPP) as having great impact on human health and the environment [...
Simulation of Water Sensitive Papers for Spray Analysis
Aim of this study was to simulate the water sensitive paper (WSP) behaviour for estimate the unitary spray deposition on the target at varying spray features and target coverage. Â WSP images were produced assuming some simplifying hypotheses: spherical drops and circular stains randomly placed on the images. Sprays were described in terms of probability distribution function (PDF) of drop size (log-normal and Rosin-Rammler), coefficient of variation of diameters (CV), arithmetic mean diameter (AMD), and volume median diameter (VMD). Â The results from the simulations showed that the overlap between stains was independent of spray features: when the percentage of covered surface of WSP images ranged from 4.7 up to 61.6%, the overlap between stains ranged from 0.3 up to 33.4%. Â Â On the contrary, unitary deposit (volume per square centimetre, mL cm-2) and particle density (number of distinct particles per square centimetre, cm-2) could be obtained from the percentage of covered surface if CV, AMD, VMD and PDF were known. Â However, assuming as spray parameter the VMD, the drop size distribution had almost no effect on the unitary deposit: with the same percentage of covered surface, the Rosin-Rammler PDF provided an estimate of the unitary deposit higher than log-normal distribution between 5 and 7% only
Modelling Spray Pressure Effects on Droplet Size Distribution from Agricultural Nozzles
For spray applications, drop size is the most important feature as it affects all aspects of a phytosanitary treatment: biological efficacy, environmental pollution, and operator safety. In turn, drop size distribution depends on nozzle type, liquid properties, and working pressure. In this research, three nozzles were studied under ordinary working conditions and the effect of pressure on drop size distribution was assessed. The nozzles under test, all from Albuz (France), were an orange hollow cone nozzle ATR 80 (European color code), an air induction flat spray nozzle AVI 11003, and an air induction hollow cone nozzle TVI 8002. The ATR 80 and the TVI 8002 nozzles were tested at four pressure values: 0.3, 0.5, 1.0, and 1.5 MPa; the AVI 11003 nozzle was tested at 0.3 and 0.5 MPa. The drop size measurement technique was based on the liquid immersion method by using a custom-made test bench; spray quality parameters were computed by means of suitable functions written in R language. Results showed that an increase in working pressure caused an increase in drop pulverization regardless of the type of nozzle, and drop pulverization was higher for the turbulence nozzle than for the two air induction nozzles. Based on skewness and kurtosis values, the theoretical gamma distribution was the most adapt to fit the experimental data. The scale parameter showed a decreasing trend with the increase in the pressure, a clear index of higher drop pulverization
Operator Dermal Exposure to Pesticides in Tomato and Strawberry Greenhouses from Hand-Held Sprayers
Protection of greenhouse crops in southern Italy usually requires 15–20 phytosanitary treatments per year, with volume rates in the range of 1000–2000 L ha1, depending on the plant growth stage. The most widespread sprayers are hand-held, high-pressure devices, which may expose operators to high levels of pesticides. This paper, also with the aim to lead toward a more sustainable use of greenhouses in agricultural productions, including some aspects of workers’ safety, reports the results of experimental tests aimed at measuring the amount of the mixture deposited on the worker’s body (potential dermal exposure, PDE) during pesticide applications to tomato and strawberry plants in a protected environment. Experimental tests on tomatoes were carried out taking into account two plant growth stages (flowering and senescence), two types of spray lance, two working pressures (1 and 2 MPa), and two walking directions (forwards and backwards). Those on the strawberries were carried out at the maturity of the fruit growth stage, comparing two hand-held
sprayers (a standard spray gun and a short hand-held spray boom equipped with two nozzles) and working according to the common practice: forwards movement of the operator and high pressure (2 MPa). The results showed that with the tomato plants, the most important factor in reducing the
deposit on the operator was the walking direction: on average, the PDE was 718 mL per 1000 L of the sprayed mixture (0.72h) while walking forwards and 133 mL (0.13h) while walking backwards. The reduction factor ranged from 3.0 at the flowering growth stage to 7.2 at the senescence growth stage. With respect to the strawberry plants, the PDE was significantly higher when the operator used the short hand-held spray boom (887 mL per 1000 L of the sprayed mixture, equivalent to 0.89h), rather than the spray gun (344 mL, 0.34h). In both cases, the most exposed body parts were the lower limbs, which accounted for 89–94% of the total PDE
Vibration produced by hand-held olive electrical harvesters
The paper reports the results of some laboratory and field tests aimed at assessing the acceleration levels transmitted to the hand-arm system by electric portable harvesters for olive. Four harvesting heads, different for shape and kinematic system, and five bars, different for diameter, length and material (aluminium and carbon fibre), were used in assembling eleven harvesters. The vibrations were measured in two points, next to the handgrips. The laboratory tests allowed the evaluation of the acceleration levels in standard controlled conditions, while the field tests allowed the assessing of the effects of the tree canopy with respect to the no load running. The laboratory tests showed that in reducing the vibration level plays a major role the kinematic system of the harvesting head and then the bar material. The classical flap-type harvester produced accelerations of around 20 m/s2, while by using a harvesting head with two parts in opposite movement, the accelerations were lowered to about 6 m/s2. The use of carbon fibres for the bars, besides the reduction in weight, produced also a reduction in acceleration (from 21 to 16 m/s2). The field tests proved that the tree canopy had a negative effect on the vibrations transmitted to the hand-arm system, especially when the aluminium bar of small diameter was used
FEM Analysis of Effects of Mechanical Impact Parameters on Fruit Characteristics
Mechanical impact on fresh agriculture commodities may be a criterial issue during mechanical processes such as grading, sorting, conveying, packing or transport. The applications of electronic measuring devices in form of artificial fruits like ‘Instrumented Spheres’ (IS) are an aid to quantify influences of mechanical impact on the value of fruit, vegetable and potato. Additionally, modelling and simulation of impact on fruits helps to identify those influencing parameters. In this study, modelling and simulation runs were performed based on the Finite Element Method (FEM). For dropping tests an ‘Acceleration Measuring Unit’ (AMU) was used which can be implemented into real or artificial fruits to measure the accelerations upon impact. The test stand was equipped with a force sensor. The relevant parameters Young moduli, density, mass, fruit dimensions, and dropping test heights were varied for the tests. FEM simulation results were compared with measured acceleration values of the AMU and force values of the test stand. On dropping potato tubers with mass of 100‑120 g from 25 cm height onto steel plates, the impact force ranged from 190 to 220 N. Simulations showed that the impact force in similar conditions (mass of 102‑113 g and Young moduli of 2.5‑3.5 MPa) ranged from 198 to 242 N, which is in good agreement with the experimental results. When the tuber mass was 190‑210 g, the measured impact force varied from 310 to 325 N. Simulations for masses of 199–221 g resulted in impact forces of 306‑325 N, again in good agreement with the experimental results. However, AMU acceleration values ranged from 922‑932 m s-2, for masses of 100‑200 g, to 765‑824 m s-2 for masses of 190‑210 g. Simulations, in similar conditions, provided acceleration values of 1934‑2314 m s-2 for masses of 102‑221 g (Young moduli 2.5‑3.5 MPa) and ranging from 1497 to 1843 m s-2 for masses of 199‑221 g, which are about twice as high than measured, probably due to effects from imperfect fit when implanted the AMU into the test fruit
Mechanical distribution of beneficial arthropods in greenhouse and open field: A review
In the last decades, political policies and collective consciousness focused on the importance of sustainable food and environmentally friendly approaches in agriculture. Distribution of beneficial organisms is a very important factor in integrated pest management, and mechanical release could improve application uniformity as well as reduce costs and working time. Several mechanisation experiences have been carried out through the years, however none of them has still found a massive application in common agricultural practices. This review paper analyses all the efforts made in this direction, by evaluating main strengths and weakness points of manually brought, tractor mounted, or aerial mechanical devices. In this way development opportunities can be identified, in a field that could achieve a substantial role in food production and agricultural activities while respecting the environment and human health
parameters influencing deposit estimation when using water sensitive papers
The aim of the study was to assess the possibility of using water sensitive papers (WSP) to estimate the amount of deposit on the target when varying the spray characteristics. To identify the main quantities influencing the deposit, some simplifying hypotheses were applied to simulate WSP behaviour: log-normal distribution of the diameters of the drops and circular stains randomly placed on the images. A very large number (4704) of images of WSPs were produced by means of simulation. The images were obtained by simulating drops of different arithmetic mean diameter (40-300 ÎĽm), different coefficient of variation (0.1-1.5), and different percentage of covered surface (2-100%, not considering overlaps). These images were considered to be effective WSP images and then analysed using image processing software in order to measure the percentage of covered surface, the number of particles, and the area of each particle; the deposit was then calculated. These data were correlated with those used to produce the images, varying the spray characteristics. As far as the drop populations are concerned, a classification based on the volume median diameter only should be avoided, especially in case of high variability. This, in fact, results in classifying sprays with very low arithmetic mean diameter as extremely or ultra coarse. The WSP image analysis shows that the relation between simulated and computed percentage of covered surface is independent of the type of spray, whereas impact density and unitary deposit can be estimated from the computed percentage of covered surface only if the spray characteristics (arithmetic mean and coefficient of variation of the drop diameters) are known. These data can be estimated by analysing the particles on the WSP images. The results of a validation test show good agreement between simulated and computed deposits, testified by a high (0.93) coefficient of determination
A Review of the Role of Vegetal Ecosystems in CO2 Capture
The reduction of carbon emissions is a worldwide global challenge and represents the objective of many scientists that are trying to modify the role of carbon, turning a problem into an opportunity. The potential of CO2 capture and storage by vegetal species is significant because of their capacity to absorb exceeding carbon emission. The purpose of the present paper is to draw a picture of the role of vegetal ecosystems on carbon fixation by identifying the most significant scientific contributions related to the absorption by vegetal species. In particular the aim of this paper is to examine different forms of CO2 sequestration made by plants and crops involved in reducing greenhouse gas (GHG) emission. Results highlight the important role played by agricultural soils, forests, perennial plants, and algae, looking at the overall reduction of carbon emissions. In addition, results show that some bioenergy crops allow substantial storage of carbon dioxide, providing a significant contribution to climate change mitigation