Assessment of psychopatologic traits in a group of patients with adult chronic periodontitis: Study on 108 cases and analysis of compliance during and after periodontal treatment

Objectives: Although there is nowadays wide agreement on bacteria being the main etiologic agents of periodontal disease, their sole presence cannot damage periodontal tissues in all subjects. This suggests that an individual response and an adaptation to a certain quantity of bacterial biofilm can occur without the disease progressing and vice versa. Depression, stress and anxiety have not been confirmed yet as risk conditions but, in some observational studies, they have been identified as potential risk factors of periodontal disease. The current study aims at investigating the role which these psychological disorder have in the onset and progression of advanced stage periodontitis. Materials and methods: The case selection was carried out by means of clinical and radiological periodontal assessment involving a total of 108 subjects, both male and female, aged between 24 and 67. Patients were then divided in two groups of 54 patients each: the first group included patients with severe periodontal disease, the second group was formed by periodontally healthy subjects. Clinical assessment was performed by a sole examiner who selected and divided periodontopathic patients from non-periodontopathic ones. From the current study were excluded: patients with systemic pathologies; smokers; patients taking antidepressant drugs; pregnant women. Results: For what concerns depression, in the group of periodontopathic patients it was found that the 62.5% of them were depressed, against the 38.86% in the group of periodontally healthy subjects. For the other two psychological conditions taken into consideration, anxiety and stress, it emerged a different percentage of subjects with anxiety in the periodontal group (31.48%) against healthy controls (20.37%). Conclusions: For each of the psychological variables considered (depression, anxiety, stress), a significant correlation could be observed with periodontal disease, it can be therefore be suggested that the importance these disturbs have in the onset and progress of the dental disease which supports the existing available data in literature. The innovative aspect of this research was the focus on the assessment of compliance, monitoring the ability of periodontal patients to follow oral hygiene instructions aiming at the improving and keeping their own periodontal condition, even though this takes more time than the control group

Roughness analysis on composite materials (Microfilled, nanofilled and silorane) after different finishing and polishing procedures

The finishing and polishing of composite materials affect the restoration lifespan. The market shows a variety of finishing and polishing procedures and the choice among them is conditioned by different factors such as the resulting surface roughness. In the present study, 156 samples were realized with three composite materials,-microfilled, nanofilled and silorane-, and treated with different finishing and polishing procedures. Profilometric analyses were carried out on the samples’ surface, the measured roughness values were submitted to statistical analysis. A complete factorial plan was drawn up and two-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of roughness: (i) material; (ii) polishing/finishing procedure. Tukey post-hoc test was also conducted to evaluate any statistically significant differences between the material/procedure combinations. The results show that the tested materials do not affect the resulting surface quality but roughness values depend on the finishing/polishing procedure adopted. The procedures that involve: (a) the finishing with medium Sof-Lex discs and (b) the finishing with two tungsten carbide multi-blade milling cutters Q series and UF series are those that allow the lowest values of roughness to be obtained

Insights into the Complex Formed by Matrix Metalloproteinase-2 and Alloxan Inhibitors: Molecular Dynamics Simulations and Free Energy Calculations

Matrix metalloproteinases (MMP) are well-known biological targets implicated in tumour progression, homeostatic regulation, innate immunity, impaired delivery of pro-apoptotic ligands, and the release and cleavage of cell-surface receptors. Hence, the development of potent and selective inhibitors targeting these enzymes continues to be eagerly sought. In this paper, a number of alloxan-based compounds, initially conceived to bias other therapeutically relevant enzymes, were rationally modified and successfully repurposed to inhibit MMP-2 (also named gelatinase A) in the nanomolar range. Importantly, the alloxan core makes its debut as zinc binding group since it ensures a stable tetrahedral coordination of the catalytic zinc ion in concert with the three histidines of the HExxHxxGxxH metzincin signature motif, further stabilized by a hydrogen bond with the glutamate residue belonging to the same motif. The molecular decoration of the alloxan core with a biphenyl privileged structure allowed to sample the deep S1′ specificity pocket of MMP-2 and to relate the high affinity towards this enzyme with the chance of forming a hydrogen bond network with the backbone of Leu116 and Asn147 and the side chains of Tyr144, Thr145 and Arg149 at the bottom of the pocket. The effect of even slight structural changes in determining the interaction at the S1′ subsite of MMP-2 as well as the nature and strength of the binding is elucidated via molecular dynamics simulations and free energy calculations. Among the herein presented compounds, the highest affinity (pIC50 = 7.06) is found for BAM, a compound exhibiting also selectivity (>20) towards MMP-2, as compared to MMP-9, the other member of the gelatinases

Evidence of signs and symptoms of craniomandibular disorders in fibromyalgia patients

Objective: The purpose of this study is to highlight the evidence of signs and symptoms of craniomandibular disorders (CMD) in patients suffering from fibromyalgia. Materials and Method: The study has been carried out from May 2011 to May 2015, recruiting a sample of fibromyalgia patients at the Department of Neurophysiopathology at the hospital Policlinico in Bari. Among the 150 examined patients, 60 of them have been diagnosed to suffer from fibromyalgia and 27 accepted to be investigated with a gnathologic examination at the Dental School at the University of Bari. Results: 24 patients (88.9%) were women and 3 (11.1%) men; from 26 to 66 years old (average age, 39). 14 patients (51.9%) were affected by primary fibromyalgia, the remaining 13 (48.1%) by secondary fibromyalgia, mainly associated with hypothyroidism (29.6%). VAS average score was about 8 ± 1.85. The frequency of pain was daily in 15 patients (55.6%); twice a week in 10 patients (37.03%) and a few times a month in 2 patients (7.4%). 11 patients (40.7%) attributed the onset of fibromyalgia to a specific instigating event. In addition, from the gnathologic anamnesis, 11 patients (40,7%) reported a painful symptom in the head-neck region, especially in the frontal region, in the neck, in the masseter muscle and ATM. VAS average score was 3.4 ± 2.8, significantly lower than the one referring to the fibromyalgia pain. The gnathological examination found CMD signs and symptoms in 18 patients (66.7%). Concerning the prevalence of CMD, in type I fibromyalgia, myofascial pain was more frequent (5 patients), whereas in type II fibromyalgia, what was more frequent was a dislocation with reduction (3 patients). Conclusion: Based on clinic experience, we can affirm that some patients with CMD report pain in other regions. It is difficult to distinguish the CMD forms directly correlated to fibromyalgia from those engendered by parafunctional activities; hence the need is to resolve the fibromyalgia syndrome adopting a multidisciplinary approach

Maxillary overdenture retained with an implant support CAD-CAM bar: A 4 years follow up case

Oral rehabilitation with overdenture on implants of upper jaw must be taken into consideration a variety of anatomical and biomechanical issues. It is possible to provide for rehabilitation with two or more implants, in different positions, solidarizing them with a bar. Materials & Methods: The present study involved a patient rehabilitated with 4 Xive implants (Friadent GmbH, Mannheim, Germany) solidarized with a titanium bar crafted with CAD-CAM technology for maximal comfort, precision and structural lightness. Results & Discussion: The follow-up was 54 months, with an implant survival of 100%. Based on our clinical evidence, bars engineered with CAD-CAM technology are promising in terms of precision and comfort despite higher costs

A Comparison of Shear Bond Strength of Ceramic and Resin Denture Teeth on Different Acrylic Resin Bases

The purpose of this study is to compare the shear bond strength of different resin bases and artificial teeth made of ceramic or acrylic resin materials and whether tooth-base interface may be treated with aluminium oxide sandblasting. Experimental measurements were carried on 80 specimens consisting of a cylinder of acrylic resin into which a single tooth is inserted. An ad hoc metallic frame was realized to measure the shear bond strength at the tooth-base interface. A complete factorial plan was designed and a three-way ANalysis Of VAriance (ANOVA) was carried out to investigate if shear bond strength is affected by the following factors: (i) tooth material (ceramic or resin); (ii) base material (self-curing or thermal-curing resin); (iii) presence or absence of aluminium oxide sandblasting treatment at the tooth-base interface. Tukey post hoc test was also conducted to evaluate any statistically significant difference between shear strength values measured for the dif-ferently prepared samples. It was found from ANOVA that the above mentioned factors all affect shear strength. Furthermore, post hoc analysis indi-cated that there are statistically significant differences (p-value=0.000) between measured shear strength values for: (i) teeth made of ceramic material vs. teeth made of acrylic resin material; (ii) bases made of self-curing resin vs. thermal-curing resin; (iii) specimens treated with aluminium oxide sandblasting vs. untreated specimens. Shear strength values measured for acryl-ic resin teeth were on average 70% higher than those measured for ceramic teeth. The shear bond strength was maximized by preparing samples with thermal-curing resin bases and resin teeth submitted to aluminium oxide sandblasting

Thermodynamic integration for the case BAR to BCL.

<p>The plot shows the dV/dλ curves assembled from 13 lambda points. Transformations in water are represented as well as those in the protein for the three simulation steps.</p

Synopsis of the synthesis of compounds 3–9 in <b>Figure 1</b>.

<p>Reagents and conditions: (i) Na₂CO₃, (PPh₃)₂PdCl₂, water/dioxane, microwave heating; (ii) alloxan monohydrate, acetic acid, reflux.</p

Calculated ΔΔG values for the single steps considered in the forward and backward transitions of <b>BAR-BCL</b> and <b>BAR-BAM</b>.

<p>Calculated ΔΔG values for the single steps considered in the forward and backward transitions of <b>BAR-BCL</b> and <b>BAR-BAM</b>.</p