Cygnus X-3 in outburst : quenched radio emission, radiation losses and variable local opacity

We present multiwavelength observations of Cygnus X-3 during an extended outburst in 1994 February - March. Intensive radio monitoring at 13.3, 3.6 & 2.0 cm is complemented by observations at (sub)millimetre and infrared wavelengths, which find Cyg X-3 to be unusually bright and variable, and include the first reported detection of the source at 0.45 mm. We report the first confirmation of quenched radio emission prior to radio flaring independent of observations at Green Bank. The observations reveal evidence for wavelength-dependent radiation losses and gradually decreasing opacity in the environment of the radio jet. We find that the radiation losses are likely to be predominantly inverse Compton losses experienced by the radio-emitting electrons in the strong radiation field of a luminous companion to the compact object. We interpret the decreasing opacity during the flare sequence as resulting from a decreasing proportion of thermal electrons entrained in the jet, reflecting a decreasing density in the region of jet formation. We present, drawing in part on the work of other authors, a model based upon mass-transfer rate instability predicting gamma-ray, X-ray, infrared and radio trends during a radio flaring sequence.Comment: LaTeX, 11 pages, 6 figures. Submitted to MNRA

Nanosized patterns as reference structures for macroscopic transport properties and vortex phases in YBCO films

This paper studies the striking correlation between nanosized structural patterns in YBCO films and macroscopic transport current. A nanosized network of parallel Josephson junctions laced by insulating dislocations is almost mimicking the grain boundary structural network. It contributes to the macroscopic properties and accounts for the strong intergranular pinning across the film in the intermediate temperature range. The correlation between the two networks enables to find out an outstanding scaling law in the (Jc,B) plane and to determine meaningful parameters concerning the matching between the vortex lattice and the intergranular defect lattice. Two asymptotic behaviors of the pinning force below the flux flow regime are checked: the corresponding vortex phases are clearly individuated.Comment: 4 pages, 4 figure

Strong Reduction of the Field-Dependent Microwave Surface Resistance in YBCO with BaZrO_3 Inclusions

We present measurements of the magnetic field dependent microwave surface resistance in laser-ablated YBa$_2$Cu$_3$O$_{7-\delta}$ films on SrTiO$_3$ substrates. BaZrO$_3$ crystallites were included in the films using composite targets containing BaZrO$_3$ inclusions with mean grain size smaller than 1 $\mu$m. X-ray diffraction showed single epitaxial relationship between BaZrO$_3$ and YBa$_2$Cu$_3$O$_{7-\delta}$. The effective surface resistance was measured at 47.7 GHz for 60$< T <$90 K and 0$< \mu_0H <$0.8 T. The magnetic field had a very different effect on pristine YBa$_2$Cu$_3$O$_{7-\delta}$ and YBa$_2$Cu$_3$O$_{7-\delta}$/BaZrO$_3$, while for $\mu_0H=$0 only a reduction of $T_c$ in the YBa$_2$Cu$_3$O$_{7-\delta}$/BaZrO$_3$ film was observed, consistent with dc measurements. At low enough $T$, in moderate fields YBa$_2$Cu$_3$O$_{7-\delta}$/BaZrO$_3$ exhibited an intrinsic thin film resistance lower than the pure film. The results clearly indicate that BaZrO$_3$ inclusions determine a strong reduction of the field-dependent surface resistance. From the analysis of the data in the framework of simple models for the microwave surface impedance in the mixed state we argue that BaZrO$_3$ inclusions determine very steep pinning potentials.Comment: LaTeX, 6 pages, 4 figures, uses jpconf.cls and jpconf11.clo class files, talk given at EUCAS 2007, submitted to J. Phys.: Conf. Serie

A new apparatus for deep patterning of beam sensitive targets by means of high-energy ion beam

The paper reports on a high precision equipment designed to modify over 3-dimensions (3D) by means of high-energy gold ions the local properties of thin and thick films. A target-moving system aimed at creating patterns across the volume is driven by an x-y writing protocol that allows one to modify beam sensitive samples over micrometer-size regions of whatever shape. The apparatus has a mechanical resolution of 15 nm. The issue of the local fluence measurement has been particularly addressed. The setup has been checked by means of different geometries patterned on beam sensitive sheets as well as on superconducting materials. In the last case the 3D modification consists of amorphous nanostructures. The nanostructures create zones with different dissipative properties with respect to the virgin regions. The main analysis method consists of magneto-optical imaging that provides local information on the electrodynamics of the modified zones. Features typical of non-linear current flow hint at which pattern geometry is more functional to applications in the framework of nanostructures across superconducting films.Comment: 7 page

Evaluation of the surface strength of glass plates shaped by hot slumping process

The Hot Slumping Technology is under development by several research groups in the world for the realization of grazing-incidence segmented mirrors for X-ray astronomy, based on thin glass plates shaped over a mould at temperatures above the transformation point. The performed thermal cycle and related operations might have effects on the strength characteristics of the glass, with consequences on the structural design of the elemental optical modules and consecutively on the entire X-ray optic for large astronomical missions like IXO and ATHENA. The mechanical strength of glass plates after they underwent the slumping process was tested through destructive double-ring tests in the context of a study performed by the Astronomical Observatory of Brera with the collaboration of Stazione Sperimentale del Vetro and BCV Progetti. The entire study has been realized on more than 200 D263 Schott borosilicate glass specimens of dimension 100 mm x 100 mm and thickness 0.4 mm, either flat or bent at a Radius of Curvature of 1000 mm through the particular pressure assisted hot slumping process developed by INAF-OAB. The collected experimental data have been compared to non-linear FEM analyses and treated with Weibull statistic to assess the current IXO glass X-ray telescope design, in terms of survival probability, when subject to static and acoustic loads characteristic of the launch phase. The paper describes the activities performed and presents the obtained results.Comment: Accepted for publication in Optical Enginnering (Jun 26, 2014

Conceptual design of electron beam diagnostics for high brightness plasma accelerator

A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated beams, including emittance, while $\mu$m level and fs scale beam size and bunch length respectively are requested. The needed to separate the driver pulse (both laser or beam) from the witness accelerated bunch imposes additional constrains for the diagnostics. We plan to use betatron radiation for the emittance measurement just at the end of the plasma booster, while other single-shot methods must be proven before to be implemented. Longitudinal measurements, being in any case not trivial for the fs level bunch length, seem to have already a wider range of possibilities

Long-Term Flux Monitoring of LSI +61 303 at 2.25 and 8.3 GHz

LSI +61 303 is an exotic binary system consisting of a ~10 Msun B star and a compact object which is probably a neutron star. The system is associated with the interesting radio source GT0236+610 that exhibits bright radio outbursts with a period of 26.5 days. We report the results of continuous daily radio interferometric observations of GT0236+610 at 2.25 and 8.3 GHz from 1994 January to 1996 February. The observations cover 25 complete (and 3 partial) cycles with multiple observations each day. We detect substantial cycle-to-cycle variability of the radio emission characterized by a rapid onset of the radio flares followed by a more gradual decrease of the emission. We detect a systematic change of the radio spectral index alpha which typically becomes larger than zero at the onset of the radio outbursts. This behavior is suggestive of expansion of material initially optically thick to radio frequencies, indicating either that synchrotron or inverse Compton cooling are important or that the free-free optical depth to the source is rapidly changing. After two years of observations, we see only weak evidence for the proposed 4-year periodic modulation in the peak flux of the outbursts. We observe a secular trend in the outburst phases according the the best published ephemeris. This trend indicates either orbital period evolution, or a drift in outburst orbital phase in response to some other change in the system.Comment: 23 pages, LaTex, 7 figures, to appear in ApJ, v491, Dec 10th issue, for associated info and preprints see http://www.srl.caltech.edu/personnel/paulr/lsi.htm