2 research outputs found
Influence of Particle Coating and Matrix Constituents on the Cloud Point Extraction Efficiency of Silver Nanoparticles (Ag-NPs) and Application for Monitoring the Formation of Ag-NPs from Ag<sup>+</sup>
For the quantification of silver
nanoparticles (Ag-NPs) in environmental
samples using cloud point extraction (CPE) for selective enrichment,
surface modification of the Ag-NPs and matrix effects can play a key
role. In this work we validate CPE with respect to the influence of
different coatings and naturally occurring matrix components. The
Ag-NPs tested were functionalized with inorganic and organic compounds
as well as with biomolecules. Commercially available NPs and NPs synthesized
according to methods published in the literature were used. We found
that CPE can extract almost all Ag-NPs tested with very good efficiencies
(82–105%). Only Ag-NPs functionalized with BSA (bovine serum
albumin), which is a protein with the function to keep colloids in
solution, cannot be extracted. No or little effect of environmentally
relevant salts, organic matter, and inorganic colloids on the CPE
of AgNPs was found. Additionally we used CPE to observe the <i>in situ</i> formation of Ag-NPs produced by the reduction of
Ag<sup>+</sup> with natural organic matter (NOM)
Quantification of Nanoscale Silver Particles Removal and Release from Municipal Wastewater Treatment Plants in Germany
The majority of pure silver nanoparticles
in consumer products
are likely released into sewer systems and usually end up in wastewater
treatment plants (WWTPs). Research investigating the reduction in
nanoscale silver particles (n-Ag-Ps) has focused on the biological
treatment process, generally in controlled laboratory experiments.
This study, analyzing the field-collected samples from nine municipal
WWTPs in Germany, is the first to evaluate the reduction in n-Ag-Ps
by mechanical and biological treatments in sequence in WWTPs. Additionally,
the concentration of n-Ag-Ps in effluent was determined through two
different methods that are presented here: novel ionic exchange resin
(IER) and cloud point extraction (CPE) methods. The n-Ag-Ps concentrations
in influent were all low (<1.5 μg/L) and decreased (average
removal efficiency of ∼35%) significantly after mechanical
treatment, indicating that the mechanical treatment contributes to
the n-Ag-Ps removal. Afterward, more than 72% of the remaining n-Ag-Ps
in the semi-treated wastewater (i.e., wastewater after mechanical
treatment) were reduced by biological treatment. Together, these processes
reduced 95% of the n-Ag-Ps that entered WWTPs, which resulted in low
concentration of n-Ag-Ps in the effluents (<12 ng/L). For a WWTP
with 520000 t/d treatment capacity, we estimated that the daily n-Ag-Ps
load in effluent discharge equated to about 4.4 g/d. Obviously, WWTPs
are not potential point sources for n-Ag-Ps in the aquatic environment