1,184 research outputs found
Recommended from our members
Decay Heat Code Validation Activities at ORNL: Supporting Expansion of NRC Regulatory Guide 3.54
Oak Ridge National Laboratory (ORNL) has a long history of involvement in the development and validation of the ORIGEN series of isotope summation codes and nuclear data libraries, widely recognized and used to predict the decay heat for spent nuclear fuel. In particular, the ORIGEN-S code, the depletion/decay module of the SCALE code system, has been extensively validated using experimental isotopic assay data and decay heat measurements for commercial spent fuel. This work was used in the development of the technical basis for NRC Regulatory Guide 3.54 on spent fuel decay heat. The bulk of the experimental data used to validate spent fuel decay heat predictions are from programs of the 1970s and 1980s and consequently involve older-design fuel assemblies with a relatively low enrichment and burnup. This has led to a situation where the spent fuel now being discharged from operating reactors extends well beyond the regime of the experimental data and area of code applicability based o n the data. The absence of validation data for modern fuel designs has potentially serious consequences for decay heat predictions in terms of added safety factors to account for larger uncertainties and lower volumetric transport and storage capacities
Recommended from our members
Strategies for Application of Isotopic Uncertainties in Burnup Credit
Uncertainties in the predicted isotopic concentrations in spent nuclear fuel represent one of the largest sources of overall uncertainty in criticality calculations that use burnup credit. The methods used to propagate the uncertainties in the calculated nuclide concentrations to the uncertainty in the predicted neutron multiplication factor (k{sub eff}) of the system can have a significant effect on the uncertainty in the safety margin in criticality calculations and ultimately affect the potential capacity of spent fuel transport and storage casks employing burnup credit. Methods that can provide a more accurate and realistic estimate of the uncertainty may enable increased spent fuel cask capacity and fewer casks needing to be transported, thereby reducing regulatory burden on licensee while maintaining safety for transporting spent fuel. This report surveys several different best-estimate strategies for considering the effects of nuclide uncertainties in burnup-credit analyses. The potential benefits of these strategies are illustrated for a prototypical burnup-credit cask design. The subcritical margin estimated using best-estimate methods is discussed in comparison to the margin estimated using conventional bounding methods of uncertainty propagation. To quantify the comparison, each of the strategies for estimating uncertainty has been performed using a common database of spent fuel isotopic assay measurements for pressurized-light-water reactor fuels and predicted nuclide concentrations obtained using the current version of the SCALE code system. The experimental database applied in this study has been significantly expanded to include new high-enrichment and high-burnup spent fuel assay data recently published for a wide range of important burnup-credit actinides and fission products. Expanded rare earth fission-product measurements performed at the Khlopin Radium Institute in Russia that contain the only known publicly-available measurement for {sup 103}Rh have also been included
Recommended from our members
Evaluation of Cross-Section Sensitivities in Computing Burnup Credit Fission Product Concentrations
U.S. Nuclear Regulatory Commission Interim Staff Guidance 8 (ISG-8) for burnup credit covers actinides only, a position based primarily on the lack of definitive critical experiments and adequate radiochemical assay data that can be used to quantify the uncertainty associated with fission product credit. The accuracy of fission product neutron cross sections is paramount to the accuracy of criticality analyses that credit fission products in two respects: (1) the microscopic cross sections determine the reactivity worth of the fission products in spent fuel and (2) the cross sections determine the reaction rates during irradiation and thus influence the accuracy of predicted final concentrations of the fission products in the spent fuel. This report evaluates and quantifies the importance of the fission product cross sections in predicting concentrations of fission products proposed for use in burnup credit. The study includes an assessment of the major fission products in burnup credit and their production precursors. Finally, the cross-section importances, or sensitivities, are combined with the importance of each major fission product to the system eigenvalue (k{sub eff}) to determine the net importance of cross sections to k{sub eff}. The importances established the following fission products, listed in descending order of priority, that are most likely to benefit burnup credit when their cross-section uncertainties are reduced: {sup 151}Sm, {sup 103}Rh, {sup 155}Eu, {sup 150}Sm, {sup 152}Sm, {sup 153}Eu, {sup 154}Eu, and {sup 143}Nd
Precise predictions for WH+jet production at the LHC
We present precise predictions for the production of a Higgs boson in association with a hadronic jet and a W boson at hadron colliders. The behaviour of QCD corrections are studied for fiducial cross sections and distributions of the charged gauge boson and jet-related observables. The inclusive process (at least one resolved jet) and the exclusive process (exactly one resolved jet) are contrasted and discussed. The inclusion of QCD corrections up to O(α3s)leads to a clear stabilisation of the predictions and contributes substantially to a reduction of remaining theoretical uncertaintie
VH + jet production in hadron-hadron collisions up to order α3s in perturbative QCD
We present precise predictions for the hadronic production of an on-shell Higgs boson in association with a leptonically decaying gauge boson and a jet up to order α3s. We include the complete set of NNLO QCD corrections to both charged- and neutral-current Drell-Yan type contributions, as well as the previously known leading heavy quark loop induced contributions which involve a direct Higgs-quark coupling. As an application, we study a range of differential observables in proton-proton collisions at s√ = 13 TeV for both the charged- and neutral-current production modes. For each Higgs production process, we assess the improvement in the theoretical uncertainty for both the exclusive (njet = 1) and inclusive (njet ≥ 1) jet categories. We find that the inclusion of the NNLO corrections to the Drell-Yan type contributions is essential in stabilising the predictions and in reducing the theoretical uncertainty for both inclusive and exclusive jet production for all three modes. This is particularly true in the kinematical regimes associated with low to medium values of the transverse momentum of the produced vector boson and where the differential cross sections are the largest. For the neutral-current process, we find that the heavy quark loop induced contributions have their largest phenomenological impact (an increase in the size of the NNLO corrections, a distortion of the distribution shape and an enlargement of the left over remaining uncertainties) in kinematical regions associated to large values of pT,Z (typically above 150 GeV) where the cross sections are smaller
Predictions for Z-Boson Production in Association with a b-Jet at O(αs3)
Precise predictions are provided for the production of a Z boson and a b-jet in hadron-hadron collisions within the framework of perturbative QCD, at O(α3s). To obtain these predictions, we perform the first calculation of a hadronic scattering process involving the direct production of a flavored jet at next-to-next-to-leading-order accuracy in massless QCD and extend techniques to also account for the impact of finite heavy-quark mass effects. The predictions are compared to CMS data obtained in pp collisions at a center-of-mass energy of 8 TeV, which are the most precise data from run I of the LHC for this process, where a good description of the data is achieved. To allow this comparison, we have performed an unfolding of the data, which overcomes the long-standing issue that the experimental and theoretical definitions of jet flavor are incompatible
International comparison of spending and utilization at the end of life for hip fracture patients.
ObjectiveTo identify and explore differences in spending and utilization of key health services at the end of life among hip fracture patients across seven developed countries.Data sourcesIndividual-level claims data from the inpatient and outpatient health care sectors compiled by the International Collaborative on Costs, Outcomes, and Needs in Care (ICCONIC).Study designWe retrospectively analyzed utilization and spending from acute hospital care, emergency department, outpatient primary care and specialty physician visits, and outpatient drugs. Patterns of spending and utilization were compared in the last 30, 90, and 180 days across Australia, Canada, England, Germany, New Zealand, Spain, and the United States. We employed linear regression models to measure age- and sex-specific effects within and across countries. In addition, we analyzed hospital-centricity, that is, the days spent in hospital and site of death.Data collection/extraction methodsWe identified patients who sustained a hip fracture in 2016 and died within 12 months from date of admission.Principal findingsResource use, costs, and the proportion of deaths in hospital showed large variability being high in England and Spain, while low in New Zealand. Days in hospital significantly decreased with increasing age in Canada, Germany, Spain, and the United States. Hospital spending near date of death was significantly lower for women in Canada, Germany, and the United States. The age gradient and the sex effect were less pronounced in utilization and spending of emergency care, outpatient care, and drugs.ConclusionsAcross seven countries, we find important variations in end-of-life care for patients who sustained a hip fracture, with some differences explained by sex and age. Our work sheds important insights that may help ongoing health policy discussions on equity, efficiency, and reimbursement in health care systems
Hyptiogastrites electrinus Cockerell, 1917, from Myanmar (Burmese) amber: Redescription and its placement within the Evanioidea (Insecta: Hymenoptera)
© The Natural History MuseumThe wasp Hyptiogastrites electrinus Cockerell, 1917, from the Lower Cretaceous (Upper Albian) Myanmar (Burmese) amber is redescribed from the well-preserved holotype and its relationship with extant Aulacidae and Gasteruptiidae (Hymenoptera: Evanioidea) evaluated. Although the wing venation is identical to the majority of extant Hyptiogastrinae (Gasteruptiidae), phylogenetic analysis places H. electrinus as sister taxon to the Aulacidae s.str., (i.e. Aulacus + Pristaulacus). Thus, Hyptiogastrinae is confirmed as having a restricted Southern Hemisphere distribution (i.e. Australasia and South America). Consistent with this result, H. electrinus is included within a slightly more broadly defined Aulacidae rather than being placed in a new monotypic family. Characters that align this species with the Aulacidae include: having small circular eyes, percurrent Y-shaped notauli, pyramidal shape of the propodeum and the presence of a groove or ovipositor guide on the hind coxae.John T. Jennings, Andrew D. Austin and Nicholas B. Steven
Host Suitability of a Gregarious Parasitoid on Beetle Hosts: Flexibility between Fitness of Adult and Offspring
Behavioral tactics play a crucial role in the evolution of species and are likely to be found in host-parasitoid interactions where host quality may differ between host developmental stages. We investigated foraging decisions, parasitism and related fitness in a gregarious ectoparasitoid, Sclerodermus harmandi in relation to two distinct host developmental stages: larvae and pupae. Two colonies of parasitoids were reared on larvae of Monochamus alternatus and Saperda populnea (Cerambycidae: Lamiinae). Paired-choice and non-choice experiments were used to evaluate the preference and performance of S. harmandi on larvae and pupae of the two species. Foraging decisions and offspring fitness-related consequences of S. harmandi led to the selection of the most profitable host stage for parasitoid development. Adult females from the two colonies oviposited more quickly on pupae as compared to larvae of M. alternatus. Subsequently, their offspring development time was faster and they gained higher body weight on the pupal hosts. This study demonstrates optimal foraging of intraspecific détente that can occur during host-parasitoid interactions, of which the quality of the parasitism (highest fitness benefit and profitability) is related to the host developmental stage utilized. We conclude that S. harmandi is able to perfectly discriminate among host species or stages in a manner that maximizes its offspring fitness. The results indicated that foraging potential of adults may not be driven by its maternal effects, also induced flexibly with encountering prior host quality
The development of radioactive sample surrogates for training and exercises
The development of radioactive sample surrogates for training and exercises Source term information is required for to reconstruct a device used in a dispersed radiological dispersal device. Simulating a radioactive environment to train and exercise sampling and sample characterization methods with suitable sample materials is a continued challenge. The Idaho National Laboratory has developed and permitted a Radioactive Response Training Range (RRTR), an 800 acre test range that is approved for open air dispersal of activated KBr, for training first responders in the entry and exit from radioactively contaminated areas, and testing protocols for environmental sampling and field characterization. Members from the Department of Defense, Law Enforcement, and the Department of Energy participated in the first contamination exercise that was conducted at the RRTR in the July 2011. The range was contaminated using a short lived radioactive Br-82 isotope (activated KBr). Soil samples contaminated with KBr (dispersed as a solution) and glass particles containing activated potassium bromide that emulated dispersed radioactive materials (such as ceramic-based sealed source materials) were collected to assess environmental sampling and characterization techniques. This presentation summarizes the performance of a radioactive materials surrogate for use as a training aide for nuclear forensics
- …