LC-MS method development and comparison of sampling materials for the analysis of organic gunshot residues

This study aimed at comparing the efficiency of various sampling materials for the collection and subsequent analysis of organic gunshot residues (OGSR). To the best of our knowledge, it is the first time that sampling devices were investigated in detail for further quantitation of OGSR by LC-MS. Seven sampling materials, namely two "swab"-type and five "stub"-type collection materials, were tested. The investigation started with the development of a simple and robust LC-MS method able to separate and quantify molecules typically found in gunpowders, such as diphenylamine or ethylcentralite. The evaluation of sampling materials was then systematically carried out by first analysing blank extracts of the materials to check for potential interferences and determining matrix effects. Based on these results, the best four materials, namely cotton buds, polyester swabs, a tape from 3M and PTFE were compared in terms of collection efficiency during shooting experiments using a set of 9 mm Luger ammunition. It was found that the tape was capable of recovering the highest amounts of OGSR. As tape-lifting is the technique currently used in routine for inorganic GSR, OGSR analysis might be implemented without modifying IGSR sampling and analysis procedure

Radiation And Annealing Characteristics Of Neutron Bombarded Silicon Transistors

Operating a silicon planar epitaxial transistor in the inverse configuration allows one to demonstrate clearly the importance of the neutron-induced base current component and its degradation of the emitter efficiency, and, because of the much larger depletion layer, to compute a volume dependent damage constant applicable to all silicon p-n junctions. The importance of minimizing the absolute change versus relative change in radiation hardening studies is clearly illustrated. Surface effects were found to be significant for transistors mounted in gas-filled cans. The diffusion potential was predicted, on theoretical grounds, to vary with neutron fluence, and the theory was experimentally confirmed. Isochronal and isothermal annealing data were obtained for the inverse configuration and from these data, it is concluded that the neutron-induced defect centers are field dependent. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc

Organic gunshot residues: observations about sampling and transfer mechanisms

This work aimed at studying the sampling, storage, transfer and persistence of organic gunshot residue (OGSR), mainly stabilizers, using liquid chromatography hyphenated to mass spectrometry. Collection using swabs and stubs was compared through sequential sampling in terms of amount of residues left on the hand of a shooter. While stubs collected nearly all residues, swabs left about 50% of the residues on the hands. Moreover, the study of storage conditions after sampling showed that stubs were more stable than swabs and could be held at room temperature without significant compound loss up to two weeks. Then, shooting experiments were performed to evaluate transfer of OGSR. It was not possible to differentiate different brands of ammunition based on a single compound concentration. Moreover, a memory effect was identified when different ammunition was shot using the same firearm. Finally, various exposed skin surfaces and hair as well as clothing were sampled to estimate what surfaces might be the best targets for OGSR sampling by comparing results just after discharge and two hours after discharging a pistol. The results indicated that OGSR were more rapidly lost from hands than from clothing. Moreover, it was shown that the face and hair of a suspect might be contaminated through secondary transfer. Thus, OGSR might remain longer on other skin surfaces, hair and clothing than on the hands of a suspect. As a consequence, sampling should also include clothing, hair and face

A study of transfer and prevalence of organic gunshot residues

The main goal of the present study was to determine the amounts and distribution of organic gunshot residues (OGSR) on the shooter’s upper body and clothing after discharging a pistol. A preliminary study was also performed to evaluate the prevalence of OGSR in the general population as well as in a police laboratory environment. In the transfer study, results indicated that OGSR are not only transferred to the hand of the shooter, but also to other parts of the upper body. Thus, wrists and forearms also represent interesting targets as they are washed less frequently than hands. Samples from the face and hair of the shooters resulted in no OGSR detection just after firing. It was also observed that the concentrations recovered from clothing are generally higher compared to the same skin area. Prevalence in both general (n = 27) and police populations (n = 25) was very low. No OGSR was detected in the samples from the general population and only two samples from the police population were found positive

Correlation of Atrial Natriuretic Peptide and Cyclic Guanosine Monophosphate Plasma Concentrations in Patients with Heart Disorders During Rest and Exercise

Peer Reviewe

Consensus based framework for digital mobility monitoring

Digital mobility assessment using wearable sensor systems has the potential to capture walking performance in a patient's natural environment. It enables monitoring of health status and disease progression and evaluation of interventions in real-world situations. In contrast to laboratory settings, real-world walking occurs in non-conventional environments and under unconstrained and uncontrolled conditions. Despite the general understanding, there is a lack of agreed definitions about what constitutes real-world walking, impeding the comparison and interpretation of the acquired data across systems and studies. The goal of this study was to obtain expert-based consensus on specific aspects of real-world walking and to provide respective definitions in a common terminological framework. An adapted Delphi method was used to obtain agreed definitions related to real-world walking. In an online survey, 162 participants from a panel of academic, clinical and industrial experts with experience in the field of gait analysis were asked for agreement on previously specified definitions. Descriptive statistics was used to evaluate whether consent (> 75% agreement as defined a priori) was reached. Of 162 experts invited to participate, 51 completed all rounds (31.5% response rate). We obtained consensus on all definitions ("Walking"> 90%, "Purposeful"> 75%, "Real-world"> 90%, "Walking bout"> 80%, "Walking speed"> 75%, "Turning"> 90% agreement) after two rounds. The identification of a consented set of realworld walking definitions has important implications for the development of assessment and analysis protocols, as well as for the reporting and comparison of digital mobility outcomes across studies and systems. The definitions will serve as a common framework for implementing digital and mobile technologies for gait assessment and are an important link for the transition from supervised to unsupervised gait assessment

Magnetic track array for efficient bead capture in microchannels

Magnetism-based microsystems, as those dedicated to immunoaffinity separations or (bio)chemical reactions, take benefit of the large surface area-to-volume ratio provided by the immobilized magnetic beads, thus increasing the sensitivity of the analysis. As the sensitivity is directly linked to the efficiency of the magnetic bead capture, this paper presents a simple method to enhance the capture in a microchannel. Considering a microchannel surrounded by two rectangular permanent magnets of different length (Lm=2, 5, 10 mm) placed in attraction, it is shown that the amount of trapped beads is limited by the magnetic forces mainly located at the magnet edges. To overcome this limitation, a polyethylene terephthalate (PET) microchip with an integrated magnetic track array has been prototyped by laser photo-ablation. The magnetic force is therefore distributed all along the magnet length. It results in a multi-plug bead capture, observed by microscope imaging, with a magnetic force value locally enhanced. The relative amount of beads, and so the specific binding surface for further immunoassays, presents a significant increase of 300% for the largest magnets. The influence of the track geometry and relative permeability on the magnetic force was studied by numerical simulations, for the microchip operating with 2-mm-long magnets

TIGIT expressing CD4+T cells represent a tumor-supportive T cell subset in chronic lymphocytic leukemia

While research on T cell exhaustion in context of cancer particularly focuses on CD8C cytotoxic T cells, the role of inhibitory receptors on CD4C T-helper cells have remained largely unexplored. TIGIT is a recently identified inhibitory receptor on T cells and natural killer (NK) cells. In this study, we examined TIGIT expression on T cell subsets from CLL patients. While we did not observe any differences in TIGIT expression in CD8C T cells of healthy controls and CLL cells, we found an enrichment of TIGITC T cells in the CD4C T cell compartment in CLL. Intriguingly, CLL patients with an advanced disease stage displayed elevated numbers of CD4C TIGITC T cells compared to low risk patients. Autologous CLL-T cell co-culture assays revealed that depleting CD4C TIGITC expressing T cells from co-cultures significantly decreased CLL viability. Accordingly, a supportive effect of TIGITCCD4C T cells on CLL cells in vitro could be recapitulated by blocking the interaction of TIGIT with its ligands using TIGIT-Fc molecules, which also impeded the T cell specific production of CLL-prosurvival cytokines. Our data reveal that TIGITCCD4CT cells provide a supportive microenvironment for CLL cells, representing a potential therapeutic target for CLL treatment