Disseny microelectrnic de circuits discriminadors de polsos pel detector LHCb

The aim of this thesis is to present a solution for implementing the front end system of the Scintillator Pad Detector (SPD) of the calorimeter system of the LHCb experiment that will start in 2008 at the Large Hadron Collider (LHC) at CERN. The requirements of this specific system are discussed and an integrated solution is presented, both at system and circuit level. We also report some methodological achievements. In first place, a method to study the PSRR (and any transfer function) in fully differential circuits taking into account the effect of parameter mismatch is proposed. Concerning noise analysis, a method to study time variant circuits in the frequency domain is presented and justified. This would open the possibility to study the effect of 1/f noise in time variants circuits. In addition, it will be shown that the architecture developed for this system is a general solution for front ends in high luminosity experiments that must be operated with no dead time and must be robust against ballistic deficit

Direct photon production at LHCb

At small Bjorken-x, the large gluon number density in the nucleon leads to gluon recombination competing with gluon splitting, which could result in saturation of the gluon PDF. This gluon saturation has yet to be conclusively observed. Direct photon production provides sensitivity to gluon densities in protons and nuclei, and the forward acceptance of LHCb detector allows for measurements of this process at low Bjorken-x, providing an ideal probe of saturation effects. Progress towards the measurement of forward direct photon production using the LHCb detector is presented

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy

Large-area silicon photomultipliers (SiPMs) are desired in many applications where large surfaces have to be covered. For instance, a large area SiPM has been developed by Hamamatsu Photonics in collaboration with the University of Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov telescopes. The sensor being about 1 cm2, a suitable preamplification electronics has been investigated in this work, which can deal with long pulses induced by the large capacitance of the sensor. The so-called Multiple Use SiPM Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona), is investigated as a potential front-end ASIC, suitable to cover large area photodetection planes of gamma-ray telescopes. The ASIC offers an interesting pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the feature of active summation of up to 8 input channels into a single differential output and it can offer a solution for reducing power consumption compared to discrete solutions. Measurements and simulations of MUSIC coupled to two SiPMs developed by Hamamatsu are considered and the ASIC response is characterized

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy

Large-area silicon photomultipliers (SiPMs) are desired in many applications where large surfaces have to be covered. For instance, a large area SiPM has been developed by Hamamatsu Photonics in collaboration with the University of Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov telescopes. The sensor being about 1 cm2, a suitable preamplification electronics has been investigated in this work, which can deal with long pulses induced by the large capacitance of the sensor. The so-called Multiple Use SiPM Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona), is investigated as a potential front-end ASIC, suitable to cover large area photodetection planes of gamma-ray telescopes. The ASIC offers an interesting pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the feature of active summation of up to 8 input channels into a single differential output and it can offer a solution for reducing power consumption compared to discrete solutions. Measurements and simulations of MUSIC coupled to two SiPMs developed by Hamamatsu are considered and the ASIC response is characterized.Postprint (published version

Lab1. Introducció al disseny analògic integrat amb l’eina Cadence

Manual de Laboratori. Disseny Analògic Integrat - DAI- Grau Enginyeria Electrònica de Telecomunicació. Material Docent. Lab1. Introducció al disseny analògic integrat amb l’eina Cadence

Lab 3. Miralls de Corrent

Lab 3. Miralls de Corrent. Disseny Analògic Integrat. Grau d'Enginyeria Electrònica de Telecomunicació

Multiple Use SiPM Integrated Circuit (MUSIC) for Large Area and High Performance Sensors

The 8-channel Multiple Use Silicon Photo-multiplier (SiPM) Integrated Circuit (MUSIC) Application specific integrated circuit (ASIC) for SiPM anode readout has been designed for applications where large photo-detection areas are required. MUSIC offers three main features: (1) Sum of the eight input channels using a differential output driver, (2) eight individual single ended (SE) analog outputs, and (3) eight individual SE binary outputs using a time over threshold technique. Each functionality, summation and individual readout includes a selectable dual-gain configuration. Moreover, the signal sum implements a dual-gain output providing a 15-bit dynamic range. The circuit contains a tunable pole zero cancellation of the SiPM recovery time constant to deal with most of the available SiPM devices in the market. Experimental tests show how MUSIC can linearly sum signals from different SiPMs and distinguish even a few photons. Additionally, it provides a single photon output pulse width at half maximum (FWHM) between 5-10 ns for the analog output and a single-photon time resolution (SPTR) around 118 ps sigma using a Hamamatsu SiPM S13360-3075CS for the binary output. Lastly, the summation mode has a power consumption of approximate to 200 mW, whereas the individual readout consumes approximate to 30 mW/ch

Lab2. Caracterització de dispositius MOS

Lab2. Caracterització dedispositius MOS. Disseny Analògic Integrat. Grau Enginyeria Electrònica de Telecomunicació

Lab 5. OTA Miller de dues etapes

Lab 5. OTA Miller de dues etapes. Disseny Analògic Integrat. Grau Enginyeria Electrònica de Telecomunicació

Strong constraints on the b → sγ photon polarisation from B 0 → K *0 e + e − decays

An angular analysis of the B0 → K∗0 e +e − decay is performed using a data sample corresponding to an integrated luminosity of 9 fb−1 of pp collisions collected with the LHCb experiment. The analysis is conducted in the very low dielectron mass squared (q 2 ) interval between 0.0008 and 0.257 GeV2 , where the rate is dominated by the B0 → K∗0γ transition with a virtual photon. The fraction of longitudinal polarisation of the K∗0 meson, FL, is measured to be FL = (4.4 ± 2.6 ± 1.4)%, where the first uncertainty is statistical and the second systematic. The ARe T observable, which is related to the lepton forward-backward asymmetry, is measured to be ARe T = −0.06 ± 0.08 ± 0.02. The A (2) T and AIm T transverse asymmetries, which are sensitive to the virtual photon polarisation, are found to be A (2) T = 0.11 ± 0.10 ± 0.02 and AIm T = 0.02 ± 0.10 ± 0.01. The results are consistent with Standard Model predictions and provide the world's best constraint on the b → sγ photon polarisation