An all-glass microfluidic network with integrated amorphous silicon photosensors for on-chip monitoring of enzymatic biochemical assay

A lab-on-chip system, integrating an all-glass microfluidics and on-chip optical detection, was developed and tested. The microfluidic network is etched in a glass substrate, which is then sealed with a glass cover by direct bonding. Thin film amorphous silicon photosensors have been fabricated on the sealed microfluidic substrate preventing the contamination of the micro-channels. The microfluidic network is then made accessible by opening inlets and outlets just prior to the use, ensuring the sterility of the device. The entire fabrication process relies on conventional photolithographic microfabrication techniques and is suitable for low-cost mass production of the device. The lab-on-chip system has been tested by implementing a chemiluminescent biochemical reaction. The inner channel walls of the microfluidic network are chemically functionalized with a layer of polymer brushes and horseradish peroxidase is immobilized into the coated channel. The results demonstrate the successful on-chip detection of hydrogen peroxide down to 18 mu M by using luminol and 4-iodophenol as enhancer agent

Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo

Alkane activation at ambient temperature - Unusual selectivities, C-C, C-H bond scission vs C-C bond coupling

Availability and low cost of light alkanes make them interesting as feedstock for commercial fuels and chemicals. However, direct conversion of lower alkanes for such purposes is a challenging problem. A discussion covers the oxidative conversion of light alkanes in the presence of cold plasma in a microreactor; variables influencing products selectivities; characteristics of the plasma microreactor; formation of C-C bonds; and directly upgrading cheap low molecular weight alkanes to commercially useful fuels and/or feedstock materials for the chemical industry. This is an abstract of a paper presented at the 42nd Loss Prevention Symposium (New Orleans, LA 4/6-10/2008)

Scalable 3D Nanoparticle Trap for Electron Microscopy Analysis

Arrays of nanoscale pyramidal cages embedded in a silicon nitride membrane are fabricated with an order of magnitude miniaturization in the size of the cages compared to previous work. This becomes possible by combining the previously published wafer‐scale corner lithography process with displacement Talbot lithography, including an additional resist etching step that allows the creation of masking dots with a size down to 50 nm, using a conventional 365 nm UV source. The resulting pyramidal cages have different entrance and exit openings, which allows trapping of nanoparticles within a predefined size range. The cages are arranged in a well‐defined array, which guarantees traceability of individual particles during post‐trapping analysis. Gold nanoparticles with a size of 25, 150, and 200 nm are used to demonstrate the trapping capability of the fabricated devices. The traceability of individual particles is demonstrated by transferring the transmission electron microscopy (TEM) transparent devices between scanning electron microscopy and TEM instruments and relocating a desired collection of particles