925 research outputs found
Velocity model of the shallow lunar crust
The travel times of the seismic waves obtained for the Apollo-14 and -16 active seismic experiments and the Apollo-16 grenade launches are shown to be consistent with a powder-layer model of the shallow lunar crust. The velocity variation with depth determined from these data is: V(z) = approximately 110 z to the 1/6 power m/sec for z less than 10 meters and V(z) is nearly = to 250 m/sec for z greater than 10 meters. The velocity values found for the 10 meter depth are similar to those found by Kovach, et al. (1972). The z to the 1/6 power depth dependence for the velocity of the topmost layer is that predicted on the basis of a powder layer (Gangi, 1972). The Amplitude variation of the direct waves as a function of source-to-receiver separation, x, is A(x) = A(o)x to the -n power exp(-ax) where 1.5 n 2.2 and a is nearly = to 0.047 neper/m. Velocity-spectra analyses of the direct, surface-reflected, bottom-reflected and refracted waves give results that are consistent with the velocity model inferred from the traveltime data
A comparison of two types of velocity models for the lunar crust: Smooth continuous and stepwise layered
The data from the Apollo-14 and Apollo-16 Active Seismic Experiments were reanalyzed and show that a power-law velocity variation with depth is consistent with both the traveltimes and amplitudes of the first arrivals for source-to-geophone separations up to 32m. The data were improved by removing spurious glithches, flickering and stacking. While this improved the signal-to-noise ratios, it was not possible to measure the arrivals beyond 32m. The physical evidence that the shallow lunar regolith is made up of fine particles adds weight to the 1/6-power velocity model. The 1/6-power law predicts the traveltime t(x), varies with separation, x, as t(x) = t sub 0 (x/x sub 0) to the 5/6 power and, using a first-order theory, the amplitude, A(x), varies as A(x) = A sub 0 (x/x sub 0) to the (13-m)/12, M 1; the layer-velocity model predicts t(x) = t sub 0 (x/xsub 0) and A(x) = A sub 0 (x/x sub 0) to the 2nd power
Assessment of the usability and accuracy of two-diode models for photovoltaic modules
Many diode-based equivalent circuits for simulating the electrical behaviour of photovoltaic (PV) cells and panels are reported in the scientific literature. Two-diode equivalent circuits, which require more complex procedures to calculate the seven model parameters, are less numerous. The model parameters are generally calculated using the data extracted from the datasheets issued by the PV panel manufactures and adopting simplifying hypotheses and numerical solving techniques. A criterion for rating both the usability and accuracy of two-diode models is proposed in this paper with the aim of supporting researchers and designers, working in the area of PV systems, to select and use a model that may be fit for purpose. The criterion adopts a three-level rating scale that considers the ease of finding the data used by the analytical procedure, the simplicity of the mathematical tools needed to perform calculations and the accuracy achieved in calculating the current and power. The analytical procedures, the simplifying hypotheses and the operative steps to calculate the parameters of the most famous two-diode equivalent circuits are exhaustively described in this paper. The accuracy of the models is tested by comparing the characteristics issued by the PV panel manufacturers with the current-voltage (I-V) curves, at constant solar irradiance and/or cell temperature, calculated with the analysed models with. The results of the study show that the two-diode models recently proposed reach accuracies that are comparable with the values derived from the one-diode models
Violation of Bell's inequality for phase singular beams
We have considered optical beams with phase singularity and experimentally
verified that these beams, although being classical, have properties of two
mode entanglement in quantum states. We have observed the violation of Bell's
inequality for continuous variables using the Wigner distribution function
(WDF) proposed by Chowdhury et al. [Phys. Rev. A \textbf{88}, 013830 (2013)].
Our experiment establishes a new form of Bell's inequality in terms of the WDF
which can be used for classical as well as quantum systems.Comment: 7 pages, 9 figures and 1 tabl
Elastic moduli approximation of higher symmetry for the acoustical properties of an anisotropic material
The issue of how to define and determine an optimal acoustical fit to a set
of anisotropic elastic constants is addressed. The optimal moduli are defined
as those which minimize the mean squared difference in the acoustical tensors
between the given moduli and all possible moduli of a chosen higher material
symmetry. The solution is shown to be identical to minimizing a Euclidean
distance function, or equivalently, projecting the tensor of elastic stiffness
onto the appropriate symmetry. This has implications for how to best select
anisotropic constants to acoustically model complex materials.Comment: 20 page
Effect of Nitrophoska® and irrigation interval on root and sugar yield of sugar beet (Beta vulgaris L.), Gezira State, Sudan
Sugar beet is one of the promising crops in the Sudan due to its high root, sugar yield and by-products as an industrial crop. The crop is also a promising alternative energy crop for the production of ethanol. An experiment was conducted at the experimental Farm of the Faculty of Agricultural Sciences, University of Gezira, Wad Medani, Sudan, during seasons 2012/13 and 2013/14. The objective was to investigate the effects of irrigation intervals (7, 14 and 21 days) and Nitrophoska (NPK compound fertilizer) rates (0, 100, 150 and 200 kg/ha) on root and sugar yield of sugar beet (Ballade cultivar) under Gezira conditions. Split-plot design with three replicates was used. Irrigation intervals were allotted to the main plots and Nitrophoska rates to the subplots. Results showed that shortening irrigation intervals from 21 to 14 and 7 days increased root diameter, root weight and root and sugar yields in both seasons. In addition, Nitrophoska rate of 150 kg/ha substantially improved most of the studied root characters and sugar yield in both seasons. Depending on the results of this study, to obtain high root and sugar yields from sugar beet Ballade cultivar, it could be recommended to apply 150 kg/ha of Nitrophoska and irrigate every 7 to14 days.
بنجر السكر من المحاصيل الواعدة في السودان وذلك نسبة لإنتاجيته العالية من الجذور والسكر ومنتجاته كمحصول صناعي. بنجر السكر من محاصيل الطاقة البديلة الواعدة لإنتاج الإيثانول. أجريت التجربة في المزرعة التجريبية، كلية العلوم الزراعية، جامعة الجزيرة، وادمدني، السودان في الموسمين 2012/ 13 و 2013/14م على التوالي. الهدف من التجربة هو دراسة تأثير فترات الري (7 و14 و21 يوم) ومعدلات سماد النيتروفوسكا المركب (0 و100 و150 و200 كجم للهكتار) على إنتاجية الجذور والسكر لبنجر السكر (صنف بلدي) تحت ظروف الجزيرة. تم إستخدام تصميم القطع المنشقة بثلاث تكرارات. أوضحت النتائج أن تقليل فترات الري من 21 الي 14 و7 زاد قطر الجذر ووزن الجذر وإنتاجية الجذور والسكر في كلا الموسمين. زيادة معدلات سماد النيتروفوسكا المركب من 0 الى أكثر 150 كجم للهكتار حسن بشكل كبير أغلب الصفات المدروسة للجذر وإنتاجية السكر في كلا الموسمين. إعتماداً على نتائج هذه الدراسة للحصول على أعلى إنتاجية من الجذور والسكر لمحصول بنجر السكر نوصي بإضافة سماد النيتروفوسكا بمعدل 150 كجم/هكتار على أن يروى المحصول كل 7 إلى 14 يو
- …