Применение тепловизора в учебно-исследовательской деятельности

The paper shows that а thermal imaging device can be successfully applied in teaching and research activities. The methods of research heat transfer capability with application a thermal imager was considered.В статье показано, что тепловизор может быть успешно применен в учебно-исследовательской деятельности. Рассмотрена методика исследования теплопередающей способности термосифона с использованием тепловизора

Doppler confirmation of TESS planet candidate TOI1408.01: grazing transit and likely eccentric orbit

We report an independent Doppler confirmation of the TESS planet candidate orbiting an F-type main sequence star TOI-1408 located 140 pc away. We present a set of radial velocities obtained with a high-resolution fiber-optic spectrograph FFOREST mounted at the SAO RAS 6-m telescope (BTA-6). Our self-consistent analysis of these Doppler data and TESS photometry suggests a grazing transit such that the planet obscures its host star by only a portion of the visible disc. Because of this degeneracy, the radius of TOI-1408.01 appears ill-determined with lower limit about $\sim$1 R$_{\rm Jup}$, significantly larger than in the current TESS solution. We also derive the planet mass of $1.69\pm0.20$~$M_{\rm Jup}$ and the orbital period $\sim4.425$ days, thus making this object a typical hot Jupiter, but with a significant orbital eccentricity of $0.259\pm0.026$. Our solution may suggest the planet is likely to experience a high tidal eccentricity migration at the stage of intense orbital rounding, or may indicate possible presence of other unseen companions in the system, yet to be detected.Comment: 5 pages, 3 figure

MODELING OF EJECTOR PUMPS OPERATION WITH USING ANSYS

To optimize designs of the ejector pumps being developed, modeling was performed using the ANSYS CFX package. A comparison is made with the experimental data of pressure measurements in chambers of the experimental model

Terbium Medical Radioisotope Production: Laser Resonance Ionization Scheme Development

Terbium (Tb) is a promising element for the theranostic approach in nuclear medicine. The new CERN-MEDICIS facility aims for production of its medical radioisotopes to support related R&D projects in biomedicine. The use of laser resonance ionization is essential to provide radioisotopic yields of highest quantity and quality, specifically regarding purity. This paper presents the results of preparation and characterization of a suitable two-step laser resonance ionization process for Tb. By resonance excitation via an auto-ionizing level, the high ionization efficiency of 53% was achieved. To simulate realistic production conditions for Tb radioisotopes, the influence of a surplus of Gd atoms, which is a typical target material for Tb generation, was considered, showing the necessity of radiochemical purification procedures before mass separation. Nevertheless, a 10-fold enhancement of the Tb ion beam using laser resonance ionization was observed even with Gd:Tb atomic ratio of 100:1. © Copyright © 2021 Gadelshin, Formento Cavaier, Haddad, Heinke, Stora, Studer, Weber and Wendt.This research project has been supported by a Marie Skłodowska-Curie Innovative Training Network Fellowship of the European Commission’s Horizon 2020 Programme under contract number 642889 MEDICIS-PROMED; by the German Federal Ministry of Education and Research under the consecutive projects 05P12UMCIA and 05P15UMCIA. It has been also partially supported by Equipex ARRONAX-Plus (ANR-11-EQPX-0004), Labex IRON (ANR-11-LABX-18-01), ISITE NExT (ANR-16-IDEX-0007)

Laser resonance ionization spectroscopy on lutetium for the MEDICIS project

The MEDICIS-PROMED Innovative Training Network under the Horizon 2020 EU program aims to establish a network of early stage researchers, involving scientific exchange and active cooperation between leading European research institutions, universities, hospitals, and industry. Primary scientific goal is the purpose of providing and testing novel radioisotopes for nuclear medical imaging and radionuclide therapy. Within a closely linked project at CERN, a dedicated electromagnetic mass separator system is presently under installation for production of innovative radiopharmaceutical isotopes at the new CERN-MEDICIS laboratory, directly adjacent to the existing CERN-ISOLDE radioactive ion beam facility. It is planned to implement a resonance ionization laser ion source (RILIS) to ensure high efficiency and unrivaled purity in the production of radioactive ions. To provide a highly efficient ionization process, identification and characterization of a specific multi-step laser ionization scheme for each individual element with isotopes of interest is required. The element lutetium is of primary relevance, and therefore was considered as first candidate. Three two-step excitation schemes for lutetium atoms are presented in this work, and spectroscopic results are compared with data of other authors. © 2017, Springer International Publishing Switzerland

Search for signatures of reflected light from the exoplanet HD 189733b by the method of residual dynamical spectra

© 2015, Pleiades Publishing, Ltd. The goal of the present study is the development and testing of a method for spectral detection of the light of host stars reflected from their exoplanets. The presented method is based on the analysis of dynamical spectra, which make it possible to obtain high signal-to-noise residual spectra after host star spectrum deduction. These residual spectra contain information on the light reflected from an exoplanet and on its albedo. The first results of such research for the exoplanet HD 189733b are presented in the paper. We obtained a series of a few dozens moderate-resolution spectra of the host star HD 189733. Individual spectra have a high signal-to-noise ratio (≈700) and cover a considerable part of the complete orbital cycle of the exoplanet. The use of the developed method allowed us to achieve a characteristic contrast of the reflected light detection at a level of 5 × 10−4 from the continuum. Investigation of the dynamic spectra with this characteristic value as a detection threshold has not revealed obvious evidence of the host star light reflected from the planet. Nevertheless, the obtained threshold is high, which demonstrates the necessity of the development of the method for the exoplanet monitoring studies

First laser ions at the CERN-MEDICIS facility

The CERN-MEDICIS facility aims to produce emerging medical radionuclides for the theranostics approach in nuclear medicine with mass separation of ion beams. To enhance the radioisotope yield and purity of collected samples, the resonance ionization laser ion source MELISSA was constructed, and provided the first laser ions at the facility in 2019. Several operational tests were accomplished to investigate its performance in preparation for the upcoming production of terbium radioisotopes, which are of particular interest for medical applications. © 2020, The Author(s).KU LeuvenHorizon 2020: 642889 MEDICIS-PROMED05P12UMCIA, 05P15UMCIAOpen Access funding provided by Projekt DEAL. We would like to acknowledge the help and assistance from the whole MEDICIS collaboration; from CERN-ISOLDE Technical and Physical groups. This research project has been supported by a Marie Skłodowska-Curie Innovative Training Network Fellowship of the European Commission’s Horizon 2020 Programme under contract number 642889 MEDICIS-PROMED; by the German Federal Ministry of Education and Research under the consecutive projects 05P12UMCIA and 05P15UMCIA; by the Research Foundation Flanders FWO (Belgium) and by a KU Leuven START grant

MELISSA: Laser ion source setup at CERN-MEDICIS facility. Blueprint

The Resonance Ionization Laser Ion Source (RILIS) has become an essential feature of many radioactive ion beam facilities worldwide since it offers an unmatched combination of efficiency and selectivity in the production of ion beams of many different chemical elements. In 2019, the laser ion source setup MELISSA is going to be established at the CERN-MEDICIS facility, based on the experience of the workgroup LARISSA of the University Mainz and CERN ISOLDE RILIS team. The purpose is to enhance the capability of the radioactive ion beam supply for end users by optimizing the yield and the purity of the final product. In this article, the blueprint of the laser ion source, as well as the key aspects of its development and operation are presented. © 2019 Elsevier B.V.This research project has been supported by a Marie Skłodowska-Curie Innovative Training Network Fellowship of the European Commission's Horizon 2020 Programme under contract number 642889 MEDICIS-PROMED; by a Research and Innovation Programme of the European Commission's Horizon 2020 under contract number 654002 (ENSAR2-RESIST); by a grant from the French National Agency for Research called “Investissements d'Avenir”, Equipex Arronax-Plus no. ANR-11-EQPX-0004 and Labex IRON no. ANR-11-LABX-18-01; by FWO-Vlaanderen (Belgium), and by a KU Leuven START Grant; by the German Federal Ministry of Education and Research under the consecutive projects 05P12UMCIA and 05P15UMCIA

Development of a Measuring Complex to Monitor the Concentration of Atmospheric Aerosol and Meteorological Parameters in the Surface Air

The development of a measuring complex to monitor the concentration of atmospheric aerosol PM2.5 and meteorological parameters of the surface air is presented. The main components of the complex are discussed, the concept of a network for environmental studies is introduced. Some results of aerosol.Исследование выполнено при финансовой поддержке РФФИ в рамках научного проекта № 19-05-50138