Accuracy Analysis of the Measurement of Centre of Gravity and Moment of Inertia with a Swing

Floating devices under wave and current loads are typically designed based on numerical methods followed by a validation with experimental investigations. This allows an independent check due to the comparison of two different modelling approaches based on different assumptions. At an early stage of the project, numerical simulations are based on theoretical (ideal) values of the centre of gravity (CG) and moment of inertia (MI). The building process of a scaled model results very often in a requested simplification of certain parts, which can influence the CG and also the MI of the scaled model. Knowing those discrepancies allows us to improve the comparability of both approaches but the measurement of those values is connected with either a higher uncertainty or a high level of effort. A significant improvement of such measurements can be reached by the deployment of a specific experimental set-up. This paper presents the classification of the newly designed swing with a high accuracy inertial inclinometer, which was verified by the marker-based motion capturing system. The achieved experiences are useful for the future use of the set-up as well as similar investigations. The comparison with the theoretical values for the swing as well as an example model showed very good agreements and a high accuracy of few millimetres for the CG and an error smaller 1% for MI

Large-scale investigation into iceberg-tsunamis generated by various iceberg calving mechanisms

© 2020 Elsevier B.V. Mass balance analysis of ice sheets is a key component to understand the effects of global warming with iceberg calving as a significant contributor. Calving recently generated tsunamis of up to 50 m in amplitude endangering human beings and coastal infrastructure. Such iceberg-tsunamis (IBTs) have been investigated based on 66 unique large-scale experiments conducted in a 50 m × 50 m large basin at constant water depth h. The experiments involved five iceberg calving mechanisms: A: capsizing, B: gravity-dominated fall, C: buoyancy-dominated fall, D: gravity-dominated overturning and E: buoyancy-dominated overturning. The kinematics of the up to 187 kg heavy plastic blocks mimicking icebergs was measured with a motion sensor and the wave profiles were recorded with wave probes at up to 35 locations. The IBTs from the gravity-dominated mechanisms (B and D) are roughly an order of magnitude larger than from mechanisms A, C and E. Empirical equations for preliminary hazard assessment and mitigation for the maximum wave height, amplitude and period for both the near- and far-field are derived for the five calving mechanisms individually and combined. The relative released energy, Froude number and relative iceberg width are the most influential dimensionless parameters in these equations. A maximum wave height decay trend close to (r/h)−1.0 is observed, with r as the radial distance, in agreement with the theoretical wave decay from a point source. The empirical equations are applied to a past event resulting in a good agreement and the upscaled wave periods to typical Greenlandic conditions overlap with the lower spectrum of landslide-tsunamis. However, empirical equations for landslide-tsunamis were found to be of limited use to predict IBTs in the far-field supporting the need of the newly introduced empirical equations for IBT hazard assessment and mitigation

Numerical Investigation of the Scaling Effects for a Point Absorber

In order to design and evaluate the behaviour of a numerically optimised wave energy converter (WEC), a recommended procedure is to initially study small scale models in controlled laboratory conditions and then progress further up until the full-scale is reached. At any point, an important step is the correct selection of the wave theory to model the dynamical behaviour of the WEC. Most authors recommend the selection of a wave theory based on dimensional parameters, which usually does not consider the model scale. In this work, the scale effects for a point absorber are studied based on numerical simulations for three different regular waves conditions. Furthermore, three different wave theories are used to simulate two scales 1:1 and 1:50. The WEC-wave interaction is modelled by using a numerical wave tank implemented in ANSYS-Fluent with a floating object representing the WEC. Results show that the normalised difference between 1:1 and 1:50 models, keeping the same wave theory fluctuate between 30% and 58% of the WEC heave motion and that a wrong selection of the wave theory can lead to differences up to 138% for the same variable. It is also found that the limits for the use of wave theories depends on the particular model and that the range of applicability of different theories can be extended

Numerical and experimental modelling of wave interaction with fixed and floating porous cylinders

This is the final version. Available on open access from Elsevier via the DOI in this recordWe consider wave forces on fixed porous cylinders with and without a solid inner cylinder and wave-induced motions of floating cylinder with and without a porous outer cylinder. Comparisons between experimental measurements and numerical predictions from an iterative boundary element method (BEM) model are presented. The BEM model assumes that pressure drop across porous surface is proportional to the square of the velocity through the surface. It is shown that the BEM model is able to accurately predict the nonlinear variation of the forces with wave amplitude or motion amplitude. It is demonstrated that adding a porous outer cylinder to a solid vertical cylinder leads to increased excitation force on the combined structure. For floating cylinders adding a porous outer cylinder also leads to a corresponding increase in excitation force. However, the porous outer cylinder provides a larger increase in the damping, resulting in reduced motion response. Further numerical simulations indicate that placing the porous cylinder lower in the water column can lead to increased damping without the corresponding increase in excitation forces. It is shown that for low Keulegan Carpenter numbers, the damping coefficient for a porous cylinder is significantly higher than the viscous damping on a solid cylinder. The results suggest that porous materials could be beneficial for motion damping of floating structures.Engineering and Physical Sciences Research Council (EPSRC)National Natural Science Foundation of Chin

Anregungen zur Qualitätssicherung in der 3-D-numerischen Modellierung mit FLOW-3D

FLOW-3D ist eine leistungsfähige 3-D-numerische Strömungssimulationssoftware für Freispiegelabflüsse. Das strukturierte und entlang der Koordinatenachsen ausgerichtete Berechnungsnetz stellt eine Besonderheit der Software dar. Dadurch ergeben sich zusätzliche Freiheiten, wie die Implementierung von bewegten Objekten oder die vereinfachte Variationsuntersuchung von Einbauten. Im Hinblick auf die Qualitätssicherung muss die Adaptierung der Geometrie an das Berechnungsnetz im Detail kontrolliert werden. Dies und weitere Modellierungsaspekte werden in diesem Beitrag behandel