Spatiotemporal instability of a confined capillary jet

Recent experimental studies on the instability appearance of capillary jets have revealed the capabilities of linear spatiotemporal instability analysis to predict the parametrical map where steady jetting or dripping takes place. In this work, we present an extensive analytical, numerical and experimental analysis of confined capillary jets extending previous studies. We propose an extended, accurate analytic model in the limit of low Reynolds flows, and introduce a numerical scheme to predict the system response when the liquid inertia is not negligible. Theoretical predictions show a remarkable accuracy with results from the extensive experimental exploration provided.Comment: Submitted to the Physical Review E (20-March-2008

Enhancement of the stability of the flow focusing technique for low-viscosity liquids

Article number 115039We propose a modified flow focusing configuration to produce low-viscosity microjets at much smaller flow rates than those reached by the standard configuration. In the modified flow focusing device, a sharpened rod blocks the recirculation cell appearing in the tapering liquid meniscus for low flow rates, which considerably improves its stability. We measured the minimum flow rates attainable with the modified configuration and compared the results with the corresponding values for the standard technique. For moderate and large applied pressure drops, the minimum flow rate reached with the modified configuration was about five times smaller than its counterpart in the standard configuration. The Weber numbers of the jets produced with the modified flow focusing configuration were considerably smaller than those with the standard technique. Numerical simulations were conducted to show how the presence of the inner rod substantially changes the flow pattern in the liquid meniscus.Ministerio de Ciencia y Educación, Junta de Extremadura y Junta de Andalucía (España) DPI2010-21103, GR10047 y P08-TEP-0412

Low and high Reynolds number flows inside Taylor cones

Liquid motions inside Taylor cones exhibit interesting features which are not well understood yet. In addition to the flow rate injected through the electrified needle to which the conical meniscus is anchored, the action of the tangential electrical stress on the cone surface induces a recirculating meridional motion, towards the apex along the generatrix and away from it along the axis. Sometimes, a vigorous swirl is observed. The characteristic value of the liquid velocity is found to be highly dependent on both the electrical conductivity and the viscosity of the liquid, so that the Reynolds number of the liquid flow varies from very small values (creeping flow) for the case of highly conducting and viscous liquids to relatively large values for liquids with sufficiently low values of the liquid conductivity and viscosity. Theoretical conical flows for low and high values of the Reynolds number show qualitatively good agreement with photographs of real flows inside Taylor cones. In particular, the existence of a vigorous swirl which is observed in the electrospraying of paraffins and other poorly conducting and low viscosity liquids can be explained as bifurcation of a primarily nonswirling meridional flow when the Reynolds number reaches a critical value.Comisión Interministerial de Ciencia y Tecnología PB96-0679-C02-0

Controlled cavity collapse: scaling laws of drop formation

The formation of transient cavities at liquid interfaces occurs in an immense variety of natural processes, among which the bursting of surface bubbles and the impact of a drop on a liquid pool are salient. The collapse of a surface liquid cavity is a well documented natural process that leads to the ejection of a thin and fast jet. Droplets generated through this process can be one order of magnitude smaller than the cavity's aperture, and they are consequently of interest in drop on demand inkjet applications. In this work, the controlled formation and collapse of a liquid cavity is analyzed, and the conditions for minimizing the resulting size and number of ejected drops are determined. The experimental and numerical models are simple and consist of a liquid reservoir, a nozzle plate with the discharge orifice, and a moving piston actuated by single half-sine-shaped pull-mode pulses. The size of the jetted droplet is described by a physical model resulting in a scaling law that is numerically and experimentally validatedRoyal Society (UF120319, URF\R\180016, and RGF\EA\180061)John Fell Oxford University Press Research Fund (0005176)EPSRC – UK (EP/P024173/1)Ministerio de Economía y Competitividad, Plan Estatal 2013–2016 Retos, project DPI2013-46485-C3-1-

Straining Flow Spinning of Artificial Silk Fibers: A Review

This work summarizes the main principles and some of the most significant results of straining flow spinning (SFS), a technology developed originally by the authors of this work. The principles on which the technology is based, inspired by the natural spinning system of silkworms and spiders, are presented, as well as some of the main achievements of the technique. Among these achievements, spinning under environmentally friendly conditions, obtaining high-performance fibers, and imparting the fibers with emerging properties such as supercontraction are discussed. Consequently, SFS appears as an efficient process that may represent one of the first realizations of a biomimetic technology with a significant impact at the production level.Ministerio de Economía y Competitividad MAT2016-75544-C2-1-RMinisterio de Economía y Competitividad MAT2016-79832-RMinisterio de Economía y Competitividad CPI2016-78887-C3-1-RComunidad de Madrid NEUROCENTRO-B2017Comunidad de Madrid BMD-376

Liquid flow-focused by a gas: jetting, dripping and recirculation

The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is explored by direct axisymmetric VOF numerical simulation; its evolution is studied as the liquid flow-rate is increased around the jetting-dripping transition. As observed in other focused flows such as electrospraying cones upon steady thread emission, the flow displays a strong recirculating pattern within the conical meniscus; it is shown to play a role on the stability of the system, being a precursor to the onset of dripping. Close to the minimum liquid flow rate for steady jetting, the recirculation cell penetrates into the feed tube. Both the jet diameter and the size of the cell are accurately estimated by a simple theoretical model. In addition, the transition from jetting to dripping is numerically analyzed in detail in some illustrative cases, and compared, to good agreement, with a set of experiments.Comment: Submitted to the Physical Review E on December 8th, 200

Air entrainment through free-surface cusps

In many industrial processes, such as pouring a liquid or coating a rotating cylinder, air bubbles are entrapped inside the liquid. We propose a novel mechanism for this phenomenon, based on the instability of cusp singularities that generically form on free surfaces. The air being drawn into the narrow space inside the cusp destroys its stationary shape when the walls of the cusp come too close. Instead, a sheet emanates from the cusp's tip, through which air is entrained. Our analytical theory of this instability is confirmed by experimental observation and quantitative comparison with numerical simulations of the flow equations

Droplet group production in an AC electro-flow-focusing microdevice

We report the production of droplet groups with a controlled number of drops in a microfluidic electro-flow focusing device under the action of an AC electric field. This regime appears for moderate voltages (500-700 V peak-to-peak) and signal frequencies between 25 and 100 Hz, much smaller than the droplet production rate ( ≈500 Hz). For this experimental conditions the production frequency of a droplet package is twice the signal frequency. Since the continuous phase flow in the microchannel is a Hagen-Poiseuille flow, the smaller droplets of a group move faster than the bigger ones leading to droplet clustering downstream.Ministerio de Economía y Competitividad DPI2013-46485-C3-1-RMinisterio de Economía y Competitividad FIS2014-54539- PJunta de Andalucía P11-FQM-791

Megahertz pulse trains enable multi-hit serial femtosecond crystallography experiments at X-ray free electron lasers

The European X-ray Free Electron Laser (XFEL) and Linac Coherent Light Source (LCLS) II are extremely intense sources of X-rays capable of generating Serial Femtosecond Crystallography (SFX) data at megahertz (MHz) repetition rates. Previous work has shown that it is possible to use consecutive X-ray pulses to collect diffraction patterns from individual crystals. Here, we exploit the MHz pulse structure of the European XFEL to obtain two complete datasets from the same lysozyme crystal, first hit and the second hit, before it exits the beam. The two datasets, separated by <1 µs, yield up to 2.1 Å resolution structures. Comparisons between the two structures reveal no indications of radiation damage or significant changes within the active site, consistent with the calculated dose estimates. This demonstrates MHz SFX can be used as a tool for tracking sub-microsecond structural changes in individual single crystals, a technique we refer to as multi-hit SFX

Rapid sample delivery for megahertz serial crystallography at X-ray FELs

Liquid microjets are a common means of delivering protein crystals to the focus of X-ray free-electron lasers (FELs) for serial femtosecond crystallography measurements. The high X-ray intensity in the focus initiates an explosion of the microjet and sample. With the advent of X-ray FELs with megahertz rates, the typical velocities of these jets must be increased significantly in order to replenish the damaged material in time for the subsequent measurement with the next X-ray pulse. This work reports the results of a megahertz serial diffraction experiment at the FLASH FEL facility using 4.3 nm radiation. The operation of gas-dynamic nozzles that produce liquid microjets with velocities greater than 80 m s-1 was demonstrated. Furthermore, this article provides optical images of X-ray-induced explosions together with Bragg diffraction from protein microcrystals exposed to trains of X-ray pulses repeating at rates of up to 4.5 MHz. The results indicate the feasibility for megahertz serial crystallography measurements with hard X-rays and give guidance for the design of such experiments