Control optimisatlion of CO(2) cycles for medium temperature retail food refrigeration systems

This is the post-print version of the final paper published in International Journal of Refrigeration. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2009 Elsevier B.V.This paper describes a detailed procedure into the investigation of optimised control strategies for CO2 cycles in medium temperature retail food refrigeration systems. To achieve this objective, an integrated model was developed composing of a detailed condenser/gas cooler model, a simplified compressor model, an isenthalpic expansion process and constant evaporating temperature and superheating. The CO2 system can operate subcritically or transcritically depending on the ambient temperature. For a transcritical operation, a prediction can be made for optimised refrigerant discharge pressures from thermodynamic cycle calculations. When the system operates in the subcritical cycle, a floating discharge pressure control strategy is employed and the effect of different transitional ambient temperatures separating subcritical and transcritical cycles on system performance is investigated. The control strategy assumes variable compressor speed and adjustable air flow for the gas cooler/condenser to be modulated to achieve the constant cooling load requirement at different ambient conditions.DEFR

Evaluation of Supermarket Energy Use and Emissions with Various Technology Options

In this paper, an operational supermarket in the UK has been selected to be modelled by the previously developed supermarket energy simulation software ‘SuperSIM’. Detailed information of the supermarket and model development procedures are explained. The model was previously validated through comparisons with site measurements of space air temperature and humidity and energy consumptions. It is therefore used to simulate, quantify and evaluate supermarket energy performance at various technology options in terms of heat recovery from refrigerant discharge, high efficiency condensers and evaporators and store locations etc

Modelling and performance evaluation of a low-temperature ammonia-water absorption refrigeration system

This paper presents the simulation of a low-temperature gas-fired ammonia-water absorption chiller for refrigeration applications. The model was developed as part of a research effort to investigate microturbine-based tri-generation systems for application in the food retail industry. The absorption chiller model was developed in the TRNSYS environment by integrating the main component models in the system and will form part of an overall TRNSYS-based supermarket model. The chiller model was validated against experimental results obtained on a 12 kW absorption chiller in the laboratory. The model was subsequently used to investigate the influence of important design and operating parameters on the performance of the chiller. © The Author 2009. Published by Oxford University Press. All rights reserved

Performance analysis of finned-tube CO2 gas cooler with advanced 1D-3D CFD modelling development and simulation

Research data for this article: Data not available / Data will be made available on request.Supplementary material is available online at: https://www.sciencedirect.com/science/article/pii/S1359431120307122?via%3Dihub#s0070 .Due to natural refrigerant applied, CO2 transcritical refrigeration and heat pump systems have been widely applied and attracted more attentions. As a main component, CO2 gas cooler plays an important role in the system performance and thus requires further development for design and control optimizations with advanced technology. Correspondingly, a new coupled 1D and 3D Computational Fluid Dynamics (CFD) model on a finned-tube CO2 gas cooler has been proposed and developed. The CFD model has been validated by comparing with literatures for parameters including airside heat transfer coefficient, refrigerant side temperature profile as well as heating capacity. The model has been applied to predict the heat exchanger performance at different operating conditions of both air and refrigerant sides and maldistributions of air flow inlet. It is found from the simulation results that the refrigerant temperature decreases abruptly in the first coil row and the refrigerant temperature profile along the heat exchanger tubes is affected by thermal conduction between two adjacent tube rows through fins. In addition, the higher air flow inlet velocity can reduce greatly the coil approach temperature and thus improve the system efficiency. Similar effect can also be found from refrigerant pressure. Furthermore, the non-uniform air flow patterns can affect considerably the coil performance in terms of the refrigerant temperature profile, coil approach temperature, coil heating capacity and system energy efficiency. The developed CFD model can be an efficient tool for the performance evaluation and optimisation of the CO2 gas cooler and its associated system.The authors would like to acknowledge the support received from Research Councils UK (ESPRC, EP/R000298/1) for this research project

The novel use of phase change materials in an open type refrigerated display cabinet: A theoretical investigation

In this paper, 2D CFD models have been developed for a prototype refrigerated open type multi-deck display cabinet with and without integrated phase change material (PCM). The models can predict the effect of adding a PCM container on cabinet efficiencies, air temperature distributions, product temperatures and air flow patterns inside the cabinet at a range of operating conditions including space air temperatures and evaporator air velocities. To validate the cabinet models, the prototype cabinet was mounted in an air conditioned chamber and extensive experiments were conducted at constant space air temperature and relative humidity. The cabinet models have therefore been validated through comparison with experiment results for air temperatures at different locations of the airflow path and of food products. Simulation results show that significant energy can be saved through the installation of a PCM container. Further benefits include greater stabilization of product temperatures during defrost periods for the modified display cabinet. Consequently, the validated models can be used to explore and analyse the cabinet performance and control strategies at various operating and design conditions.Work presented in this paper was carried out with financial support from the Department of Environment, Food and Rural Affairs (Defra: AFM280). The authors would like to acknowledge the support of Defra and the input from the collaborating partners

Personalised randomised controlled trial designs—a new paradigm to define optimal treatments for carbapenem-resistant infections

Antimicrobial resistance is impacting treatment decisions for, and patient outcomes from, bacterial infections worldwide, with particular threats from infections with carbapenem-resistant Enterobacteriaceae, Acinetobacter baumanii, or Pseudomonas aeruginosa. Numerous areas of clinical uncertainty surround the treatment of these highly resistant infections, yet substantial obstacles exist to the design and conduct of treatment trials for carbapenem-resistant bacterial infections. These include the lack of a widely acceptable optimised standard of care and control regimens, varying antimicrobial susceptibilities and clinical contraindications making specific intervention regimens infeasible, and diagnostic and recruitment challenges. The current single comparator trials are not designed to answer the urgent public health question, identified as a high priority by WHO, of what are the best regimens out of the available options that will significantly reduce morbidity, costs, and mortality. This scenario has an analogy in network meta-analysis, which compares multiple treatments in an evidence synthesis to rank the best of a set of available treatments. To address these obstacles, we propose extending the network meta-analysis approach to individual randomisation of patients. We refer to this approach as a Personalised RAndomised Controlled Trial (PRACTical) design that compares multiple treatments in an evidence synthesis, to identify, overall, which is the best treatment out of a set of available treatments to recommend, or how these different treatments rank against each other. In this Personal View, we summarise the design principles of personalised randomised controlled trial designs. Specifically, of a network of different potential regimens for life-threatening carbapenem-resistant infections, each patient would be randomly assigned only to regimens considered clinically reasonable for that patient at that time, incorporating antimicrobial susceptibility, toxicity profile, pharmacometric properties, availability, and physician assessment. Analysis can use both direct and indirect comparisons across the network, analogous to network meta-analysis. This new trial design will maximise the relevance of the findings to each individual patient, and enable the top-ranked regimens from any personalised randomisation list to be identified, in terms of both efficacy and safety

Energy analysis of alternative CO 2 refrigeration system configurations for retail food applications in moderate and warm climates

Refrigeration systems are crucial in retail food stores to ensure appropriate merchandising of food products. This paper compares four different CO2 refrigeration system configurations in terms of cooling performance, environmental impact, power consumption and annual running costs. The systems studied were the conventional booster refrigeration system with gas bypass (reference system), the all CO2 cascade system with gas bypass, a booster system with a gas bypass compressor, and integrated cascade all CO2 system with gas bypass compressor. The weather conditions of London, UK, and Athens, Greece, were used for the modelling of energy consumption and environmental impacts to represent moderate and warm climatic conditions respectively. The control strategies for the refrigeration systems were derived from experimental tests in the laboratory on a conventional booster refrigeration system. The results from the analysis showed that the CO2 booster system with gas bypass compressor can provide best performance with 5.0% energy savings for the warm climate and 3.65% for the moderate climate, followed by the integrated cascade all CO2 system with gas bypass compressor, with 3.6% and 2.1% savings over the reference system for the warm and moderate climates respectively.This study was supported by the Research Councils UK Energy programme, Grant No: EP/K011820/1 and GEA Searle, now Kevlion. The authors wish to acknowledge the cash and in-kind contributions of these organisations as well as the support received from Brunel University London and the RCUK National Centre for Sustainable Energy use in Food Chains (CSEF)

AFM, SEM and TEM Studies on Porous Anodic Alumina

Porous anodic alumina (PAA) has been intensively studied in past decade due to its applications for fabricating nanostructured materials. Since PAA’s pore diameter, thickness and shape vary too much, a systematical study on the methods of morphology characterization is meaningful and essential for its proper development and utilization. In this paper, we present detailed AFM, SEM and TEM studies on PAA and its evolvements with abundant microstructures, and discuss the advantages and disadvantages of each method. The sample preparation, testing skills and morphology analysis are discussed, especially on the differentiation during characterizing complex cross-sections and ultrasmall nanopores. The versatility of PAAs is also demonstrated by the diversity of PAAs’ microstructure

Proteomic analysis at the sites of clinical infection with invasive Streptococcus pyogenes

Invasive Streptococcus pyogenes infections are rare, with often-unexplained severity. Prompt diagnosis is desirable, as deaths can occur rapidly following onset and there is an increased, but preventable, risk to contacts. Here, proteomic analyses of clinical samples from invasive human S. pyogenes infections were undertaken to determine if novel diagnostic targets could be detected, and to augment our understanding of disease pathogenesis. Fluid samples from 17 patients with confirmed invasive S. pyogenes infection (empyema, septic arthritis, necrotising fasciitis) were analysed by proteomics for streptococcal and human proteins; 16/17 samples had detectable S. pyogenes DNA. Nineteen unique S. pyogenes proteins were identified in just 6/17 samples, and 15 of these were found in a single pleural fluid sample including streptococcal inhibitor of complement, trigger factor, and phosphoglycerate kinase. In contrast, 469 human proteins were detected in patient fluids, 177 (38%) of which could be identified as neutrophil proteins, including alpha enolase and lactotransferrin which, together, were found in all 17 samples. Our data suggest that streptococcal proteins are difficult to detect in infected fluid samples. A vast array of human proteins associated with leukocyte activity are, however, present in samples that deserve further evaluation as potential biomarkers of infection