4,459 research outputs found
Life cycle energy and carbon analysis of domestic combined heat and power generators
Micro Combined Heat and Power (micro-CHP) generators combine the benefits of the high-efficiency cogeneration technology and microgeneration and is being promoted as a means of lowering greenhouse gas emissions by decentralizing the power network. Life Cycle Assessment of energy systems is becoming a part of decision making in the energy industry, helping manufacturers promote their low carbon devices, and consumers choose the most environmentally friendly options. This report summarizes a preliminary life-cycle energy and carbon analysis of a wall-hung gas-powered domestic micro-CHP device that is commercially available across Europe. Combining a very efficient condensing boiler with a Stirling engine, the device can deliver enough heat to cover the needs of a typical household (up to 24kW) while generating power (up to 1kW) that can be used locally or sold to the grid. Assuming an annual heat production of 20 MWh, the study has calculated the total embodied energy and carbon emissions over a 15 years operational lifetime at 1606 GJ and 90 tonnes of CO2 respectively. Assuming that such a micro CHP device replaces the most efficient gas-powered condensing boiler for domestic heat production, and the power generated substitutes electricity from the grid, the potential energy and carbon savings are around 5000 MJ/year and 530 kg CO2/year respectively. This implies a payback period of the embodied energy and carbon at 1.32 - 2.32 and 0.75 - 1.35 years respectively. Apart from the embodied energy and carbon and the respective savings, additional key outcomes of the study are the evaluation of the energy intensive phases of the device’s life cycle and the exploration of potential improvements
Viewpoints: A high-performance high-dimensional exploratory data analysis tool
Scientific data sets continue to increase in both size and complexity. In the
past, dedicated graphics systems at supercomputing centers were required to
visualize large data sets, but as the price of commodity graphics hardware has
dropped and its capability has increased, it is now possible, in principle, to
view large complex data sets on a single workstation. To do this in practice,
an investigator will need software that is written to take advantage of the
relevant graphics hardware. The Viewpoints visualization package described
herein is an example of such software. Viewpoints is an interactive tool for
exploratory visual analysis of large, high-dimensional (multivariate) data. It
leverages the capabilities of modern graphics boards (GPUs) to run on a single
workstation or laptop. Viewpoints is minimalist: it attempts to do a small set
of useful things very well (or at least very quickly) in comparison with
similar packages today. Its basic feature set includes linked scatter plots
with brushing, dynamic histograms, normalization and outlier detection/removal.
Viewpoints was originally designed for astrophysicists, but it has since been
used in a variety of fields that range from astronomy, quantum chemistry, fluid
dynamics, machine learning, bioinformatics, and finance to information
technology server log mining. In this article, we describe the Viewpoints
package and show examples of its usage.Comment: 18 pages, 3 figures, PASP in press, this version corresponds more
closely to that to be publishe
Performances of Anode-resistive Micromegas for HL-LHC
Micromegas technology is a promising candidate to replace Atlas forward muon
chambers -tracking and trigger- for future HL-LHC upgrade of the experiment.
The increase on background and pile-up event probability requires detector
performances which are currently under studies in intensive RD activities.
We studied performances of four different resistive Micromegas detectors with
different read-out strip pitches. These chambers were tested using \sim120 GeV
momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500
micrometers we measure a resolution of \sim90 micrometers and a efficiency of
~98%. The track angle effect on the efficiency was also studied. Our results
show that resistive techniques induce no degradation on the efficiency or
resolution, with respect to the standard Micromegas. In some configuration the
resistive coating is able to reduce the discharge currents at least by a factor
of 100.Micromegas technology is a promising candidate to replace Atlas forward
muon chambers -tracking and trigger- for future HL-LHC upgrade of the
experiment. The increase on background and pile-up event probability requires
detector performances which are currently under studies in intensive RD
activities. We studied performances of four different resistive Micromegas
detectors with different read-out strip pitches. These chambers were tested
using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For
a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and
a efficiency of \sim98%. The track angle effect on the efficiency was also
studied. Our results show that resistive techniques induce no degradation on
the efficiency or resolution, with respect to the standard Micromegas. In some
configuration the resistive coating is able to reduce the discharge currents at
least by a factor of 100.Comment: "Presented at the 2011 Hadron Collider Physics symposium (HCP-2011),
Paris, France, November 14-18 2011, 3 pages, 6 figures.
A Gas Leak Rate Measurement System for the ATLAS MUON BIS-Monitored Drift Tubes
A low-cost, reliable and precise system developed for the gas leak rate measurement of the BIS-Monitored Drift Tubes (MDTs) for the ATLAS Muon Spectrometer is presented. In order to meet the BIS-MDT mass production rate, a total number of 100 tubes are tested simultaneously in this setup. The pressure drop of each one of the MDT is measured, within a typical time interval of 48 hours, via a differential manometer comparing with the pressure of a gas tight reference tube. The precision of the method implemented is based on the system temperature homogeneity, with accuracy of ÄT = 0.3 oC. For this reason, two thermally isolated boxes are used testing 50 tubes each of them, to achieve high degree of temperature uniformity and stability. After measuring several thousands of the MDTs, the developed system is confirmed to be appropriate within the specifications for testing the MDTs during the mass production
Coherent Moving States in Highway Traffic (Originally: Moving Like a Solid Block)
Recent advances in multiagent simulations have made possible the study of
realistic traffic patterns and allow to test theories based on driver
behaviour. Such simulations also display various empirical features of traffic
flows, and are used to design traffic controls that maximise the throughput of
vehicles in heavily transited highways. In addition to its intrinsic economic
value, vehicular traffic is of interest because it may throw light on some
social phenomena where diverse individuals competitively try to maximise their
own utilities under certain constraints.
In this paper, we present simulation results that point to the existence of
cooperative, coherent states arising from competitive interactions that lead to
a new phenomenon in heterogeneous highway traffic. As the density of vehicles
increases, their interactions cause a transition into a highly correlated state
in which all vehicles practically move with the same speed, analogous to the
motion of a solid block. This state is associated with a reduced lane changing
rate and a safe, high and stable flow. It disappears as the vehicle density
exceeds a critical value. The effect is observed in recent evaluations of Dutch
traffic data.Comment: Submitted on April 21, 1998. For related work see
http://www.theo2.physik.uni-stuttgart.de/helbing.html and
http://www.parc.xerox.com/dynamics
Radical Reactivity of Frustrated Lewis Pairs with Diaryl Esters
Advances in the chemistry of metal-free systems known as frustrated Lewis pairs (FLPs) has exposed new reactivity of the p-block elements, particularly in small-molecule activation and catalysis. Typically, the mode of activation by FLPs has been predicated on a heterolytic two-electron process, although recently, select FLPs have been shown to participate in single-electron processes. Here, we report the reaction of diaryl substituted esters with FLPs. This results in divergent pathways, one whereby the diaryl moiety is stabilized by the Lewis basic phosphine, and the alternative pathway, wherein a single-electron transfer process occurs, generating the [Mes_{3}P]+⋅/[C(H)Ar_{2}]⋅ radical ion pair. The latter species undergoes a homocoupling reaction to yield tetraphenylethane derivatives. In the presence of olefins, this reactivity can be harnessed through an sp^{2}-sp^{3} C–C heterocoupling reaction to generate α,β-substituted olefins. Notably, this work showcases an FLP approach to metal-free radical C–H bond activation with subsequent C–C bond formation, which also displays complementary reactivity to other approaches
Solar cycle effects in planetary geomagnetic activity: Analysis of 36‐year long OMNI dataset
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94796/1/grl13462.pd
An empirical test for cellular automaton models of traffic flow
Based on a detailed microscopic test scenario motivated by recent empirical
studies of single-vehicle data, several cellular automaton models for traffic
flow are compared. We find three levels of agreement with the empirical data:
1) models that do not reproduce even qualitatively the most important empirical
observations,
2) models that are on a macroscopic level in reasonable agreement with the
empirics, and 3) models that reproduce the empirical data on a microscopic
level as well.
Our results are not only relevant for applications, but also shed new light
on the relevant interactions in traffic flow.Comment: 28 pages, 36 figures, accepted for publication in PR
Congested Traffic States in Empirical Observations and Microscopic Simulations
We present data from several German freeways showing different kinds of
congested traffic forming near road inhomogeneities, specifically lane
closings, intersections, or uphill gradients. The states are localized or
extended, homogeneous or oscillating. Combined states are observed as well,
like the coexistence of moving localized clusters and clusters pinned at road
inhomogeneities, or regions of oscillating congested traffic upstream of nearly
homogeneous congested traffic. The experimental findings are consistent with a
recently proposed theoretical phase diagram for traffic near on-ramps [D.
Helbing, A. Hennecke, and M. Treiber, Phys. Rev. Lett. {\bf 82}, 4360 (1999)].
We simulate these situations with a novel continuous microscopic single-lane
model, the ``intelligent driver model'' (IDM), using the empirical boundary
conditions. All observations, including the coexistence of states, are
qualitatively reproduced by describing inhomogeneities with local variations of
one model parameter.
We show that the results of the microscopic model can be understood by
formulating the theoretical phase diagram for bottlenecks in a more general
way. In particular, a local drop of the road capacity induced by parameter
variations has practically the same effect as an on-ramp.Comment: Now published in Phys. Rev. E. Minor changes suggested by a referee
are incorporated; full bibliographic info added. For related work see
http://www.mtreiber.de/ and http://www.helbing.org
- …