518 research outputs found
A proposal of a drift chamber for the IDEA detector concept for a future e+e- collider
An ultra-low mass Tracking Chamber with Particle Identification capabilities is proposed for a future e+e- collider. Details about the construction parameters of the drift chamber including both the inspection of new material for the wires, of new techniques for soldiering the wires, the development of an improved schema for the drift cell and the choice of a gas mixture are described. The performance of the tracking are studied together with the Improved particle identification capabilities obtained by using a cluster counting technique
ATLAS RPC Quality Assurance results at INFN Lecce
The main results of the quality assurance tests performed on the Resistive
Plate Chamber used by the ATLAS experiment at LHC as muon trigger chambers are
reported and discussed.
Since July 2004, about 270 RPC units has been certified at INFN Lecce site
and delivered to CERN, for being integrated in the final muon station of the
ATLAS barrel region.
We show the key RPC characteristics which qualify the performance of this
detector technology as muon trigger chamber in the harsh LHC enviroments.
These are dark current, chamber efficiency, noise rate, gas volume
tomography, and gas leakage.Comment: Comments: 6 pages, 1 table, 9 figures Proceedings of XXV Physics in
Collision-Prague, Czech Republic, 6-9 July 200
New concepts for light mechanical structures of cylindrical drift chambers
A significant reduction in the amount of material at the end plates of a drift chamber can be obtained by the simple consideration of separating, in the mechanical structure, the gas containment function from the wire tension support function. According to this scheme, the wires are anchored to a self-sustaining light structure ("wire cage") surrounded by a very thin skin ("gas envelope") of suitable profile to compensate for the gas differential pressure with respect to the outside.
The "wire cage" is schematically made of a set of radial spokes, constrained into a polygonal shape at the inner ends and extended to the outer endplate rim, thus subdividing the chamber in identical sectors. The drift chamber is, then, built by stacking up radially, in each of the sectors and between adjacent spokes, printed circuit boards, where the ends of the wires are soldered, alternated with proper spacers, to define the cell width.
A system of adjustable tie-rods steers the wire tension to the outer endplate rim, where a rigid cylindrical carbon fibre support structure, bearing the total wire load, is attached.
Two thin carbon fibre domes, free to deform under the gas pressure without affecting the wire tension and conveniently shaped to minimize the stress at the inner rim, contribute to the "gas envelope" and, together with an inner thin cylindrical foil and with the outer structural support, enclose the gas volume
ATLAS RPC Cosmic Ray Teststand at INFN Lecce
We describe the design and functionality of the cosmic ray teststand built at
INFN Lecce for ATLAS RPC quality control assurance.Comment: XXIV Physics in Collisions Conference (PIC04), Boston, USA, June
2004, 3 pages, LaTex, 2 eps figures. MONP0
Single-hit resolution measurement with MEG II drift chamber prototypes
Drift chambers operated with helium-based gas mixtures represent a common
solution for tracking charged particles keeping the material budget in the
sensitive volume to a minimum. The drawback of this solution is the worsening
of the spatial resolution due to primary ionisation fluctuations, which is a
limiting factor for high granularity drift chambers like the MEG II tracker. We
report on the measurements performed on three different prototypes of the MEG
II drift chamber aimed at determining the achievable single-hit resolution. The
prototypes were operated with helium/isobutane gas mixtures and exposed to
cosmic rays, electron beams and radioactive sources. Direct measurements of the
single hit resolution performed with an external tracker returned a value of
110 m, consistent with the values obtained with indirect measurements
performed with the other prototypes.Comment: 18 pages, 18 figure
The front end electronics for the drift chamber readout in MEG experiment upgrade
Front-end electronics plays an essential role in drift chambers for time resolution and, therefore, spatial resolution. The use of cluster timing techniques, by measuring the arriving times of all the individual ionization clusters after the first one, may enable to reach resolutions even below 100 μm in the measurement of the impact parameter. A high performance front-end electronics, characterized by low distortion, low noise and a wide bandwidth has been developed with the purpose to implement cluster timing techniques in the new drift chamber for the upgrade of the MEG experiment at Paul Sherrer Institut (CH)
Commissioning of the MEG II tracker system
The MEG experiment at the Paul Scherrer Institut (PSI) represents the state
of the art in the search for the charged Lepton Flavour Violating (cLFV) decay. With the phase 1, MEG set the new world best
upper limit on the \mbox{BR}(\mu^+ \rightarrow e^+ \gamma) < 4.2 \times
10^{-13} (90% C.L.). With the phase 2, MEG II, the experiment aims at reaching
a sensitivity enhancement of about one order of magnitude compared to the
previous MEG result. The new Cylindrical Drift CHamber (CDCH) is a key detector
for MEG II. CDCH is a low-mass single volume detector with high granularity: 9
layers of 192 drift cells, few mm wide, defined by wires in a
stereo configuration for longitudinal hit localization. The filling gas mixture
is Helium:Isobutane (90:10). The total radiation length is
\mbox{X}_0, thus minimizing the Multiple Coulomb Scattering (MCS)
contribution and allowing for a single-hit resolution m and an
angular and momentum resolutions of 6 mrad and 90 keV/c respectively. This
article presents the CDCH commissioning activities at PSI after the wiring
phase at INFN Lecce and the assembly phase at INFN Pisa. The endcaps
preparation, HV tests and conditioning of the chamber are described, aiming at
reaching the final stable working point. The integration into the MEG II
experimental apparatus is described, in view of the first data taking with
cosmic rays and beam during the 2018 and 2019 engineering runs. The
first gas gain results are also shown. A full engineering run with all the
upgraded detectors and the complete DAQ electronics is expected to start in
2020, followed by three years of physics data taking.Comment: 10 pages, 12 figures, 1 table, proceeding at INSTR'20 conference,
accepted for publication in JINS
Energy and time resolution for a LYSO matrix prototype of the Mu2e experiment
We have measured the performances of a LYSO crystal matrix prototype tested
with electron and photon beams in the energy range 60450 MeV. This study has
been carried out to determine the achievable energy and time resolutions for
the calorimeter of the Mu2e experiment.Comment: 2 pages, 3 figures, 13th Pisa Meeting on Advanced Detector
A 10-3 drift velocity monitoring chamber
The MEG-II experiment searches for the lepton flavor violating decay: mu in
electron and gamma. The reconstruction of the positron trajectory uses a
cylindrical drift chamber operated with a mixture of He and iC4H10 gas. It is
important to provide a stable performance of the detector in terms of its
electron transport parameters, avalanche multiplication, composition and purity
of the gas mixture. In order to have a continuous monitoring of the quality of
gas, we plan to install a small drift chamber, with a simple geometry that
allows to measure very precisely the electron drift velocity in a prompt way.
This monitoring chamber will be supplied with gas coming from the inlet and the
outlet of the detector to determine if gas contaminations originate inside the
main chamber or in the gas supply system. The chamber is a small box with
cathode walls, that define a highly uniform electric field inside two adjacent
drift cells. Along the axis separating the two drift cells, four staggered
sense wires alternated with five guard wires collect the drifting electrons.
The trigger is provided by two 90Sr weak calibration radioactive sources placed
on top of a two thin scintillator tiles telescope. The whole system is designed
to give a prompt response (within a minute) about drift velocity variations at
the 0.001 level
- …