3D-melting features of the irreversibility line in overdoped Bi2_2Sr2_2CuO6_6 at ultra-low temperature and high magnetic field

We have measured the irreversible magnetization of an overdoped Bi$_2$Sr$_2$CuO$_6$ single crystal up to B=28 T and down to T=60 mK, and extracted the irreversibility line $B_{\rm irr}(T)$: the data can be interpreted in the whole temperature range as a 3D-anisotropic vortex lattice melting line with Lindemann number $c_{\rm L}=0.13$. We also briefly discuss the applicability of alternative models such as 2D- and quantum melting, and the connection with magnetoresistance experiments.Comment: M2S-HTSC-VI Conference paper (2 pages, 1 figure), using Elsevier style espcrc2.st

The geomorphological setting of some of Scotland's east coast freshwater mills: a comment on Downward and Skinner (2005) ‘Working rivers: the geomorphological legacy...’

Many of the water mills on Scotland's east coast streams, unlike those discussed recently by Downward and Skinner (2005 Area 37 138–47), are found in predominantly bedrock reaches immediately downstream of knickpoints (i.e. bedrock steps). Bedrock knickpoints in the lower reaches of Scottish rivers are a widespread fluvial response to the glacio-isostatic rebound of northern Britain. These steps in the river profile propagate headward over time, but for intervals of a few centuries or so they are sufficiently stable to be exploited for the elevational fall necessary to power the mill wheel. Many of these mills were apparently powered by ‘run-of-the-river’, as are some today that formerly had mill dams. The typical lack of sediment storage along the erosional lower reaches of many Scottish rivers means that failure of mill structures in Scotland will probably have less dramatic geomorphological and management implications than those suggested by Downward and Skinner for southern English rivers

Exotic magnetism in the alkali sesquoxides Rb4O6 and Cs4O6

Among the various alkali oxides the sesquioxides Rb4O6 and Cs4O6 are of special interest. Electronic structure calculations using the local spin-density approximation predicted that Rb4O6 should be a half-metallic ferromagnet, which was later contradicted when an experimental investigation of the temperature dependent magnetization of Rb4O6 showed a low-temperature magnetic transition and differences between zero-field-cooled (ZFC) and field-cooled (FC) measurements. Such behavior is known from spin glasses and frustrated systems. Rb4O6 and Cs4O6 comprise two different types of dioxygen anions, the hyperoxide and the peroxide anions. The nonmagnetic peroxide anions do not contain unpaired electrons while the hyperoxide anions contain unpaired electrons in antibonding pi*-orbitals. High electron localization (narrow bands) suggests that electronic correlations are of major importance in these open shell p-electron systems. Correlations and charge ordering due to the mixed valency render p-electron-based anionogenic magnetic order possible in the sesquioxides. In this work we present an experimental comparison of Rb4O6 and the related Cs4O6. The crystal structures are verified using powder x-ray diffraction. The mixed valency of both compounds is confirmed using Raman spectroscopy, and time-dependent magnetization experiments indicate that both compounds show magnetic frustration, a feature only previously known from d- and f-electron systems

Derivative based global sensitivity measures

The method of derivative based global sensitivity measures (DGSM) has recently become popular among practitioners. It has a strong link with the Morris screening method and Sobol' sensitivity indices and has several advantages over them. DGSM are very easy to implement and evaluate numerically. The computational time required for numerical evaluation of DGSM is generally much lower than that for estimation of Sobol' sensitivity indices. This paper presents a survey of recent advances in DGSM concerning lower and upper bounds on the values of Sobol' total sensitivity indices $S\_{i}^{tot}$. Using these bounds it is possible in most cases to get a good practical estimation of the values of $S\_{i}^{tot}$. Several examples are used to illustrate an application of DGSM

Performance of the EUDET-type beam telescopes

Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage. Both data acquisition framework and offline reconstruction software packages are available. User devices are easily integrable into the data acquisition framework via predefined interfaces. The biased residual distribution is studied as a function of the beam energy, plane spacing and sensor threshold. Its standard deviation at the two centre pixel planes using all six planes for tracking in a 6\,GeV electron/positron-beam is measured to be (2.88\,\pm\,0.08)\,\upmu\meter.Iterative track fits using the formalism of General Broken Lines are performed to estimate the intrinsic resolution of the individual pixel planes. The mean intrinsic resolution over the six sensors used is found to be (3.24\,\pm\,0.09)\,\upmu\meter.With a 5\,GeV electron/positron beam, the track resolution halfway between the two inner pixel planes using an equidistant plane spacing of 20\,mm is estimated to (1.83\,\pm\,0.03)\,\upmu\meter assuming the measured intrinsic resolution. Towards lower beam energies the track resolution deteriorates due to increasing multiple scattering. Threshold studies show an optimal working point of the MIMOSA26 sensors at a sensor threshold of between five and six times their RMS noise. Measurements at different plane spacings are used to calibrate the amount of multiple scattering in the material traversed and allow for corrections to the predicted angular scattering for electron beams

Topological oscillations of the magnetoconductance in disordered GaAs layers

Oscillatory variations of the diagonal ($G_{xx}$) and Hall ($G_{xy}$) magnetoconductances are discussed in view of topological scaling effects giving rise to the quantum Hall effect. They occur in a field range without oscillations of the density of states due to Landau quantization, and are, therefore, totally different from the Shubnikov-de Haas oscillations. Such oscillations are experimentally observed in disordered GaAs layers in the extreme quantum limit of applied magnetic field with a good description by the unified scaling theory of the integer and fractional quantum Hall effect.Comment: 4 pages, 4 figure

Polaron Effects on Superexchange Interaction: Isotope Shifts of TNT_N, TCT_C, and T∗T^* in Layered Copper Oxides

A compact expression has been obtained for the superexchange coupling of magnetic ions via intermediate anions with regard to polaron effects at both magnetic ions and intermediate anions. This expression is used to analyze the main features of the behavior of isotope shifts for temperatures of three types in layered cuprates: the Neel temperatures ($T_N$), critical temperatures of transitions to a superconducting state ($T_C$), and characteristic temperatures of the pseudogap in the normal state ($T^*$).Comment: 4 pages, 1 figur

Minimising medicine use in organic dairy herds through animal health and welfare planning

Livestock is important in many organic farming systems, and it is an explicit goal to ensure high levels of animal health and welfare (AHW) through good management. This will lead to reduced medicine use and better quality of animal products. In two EU network projects NAHWOA & SAFO it was concluded that this is not guaranteed merely by following organic standards. Both networks recommended implementation of individual animal health plans to stimulate organic farmers to improve AHW. These plans should include a systematic evaluation of AHW and be implemented through dialogue with each farmer in order to identify goals and plan improvements. 15 research institutions in 8 European countries are involved in the proposed project with the main objective to minimise medicine use in organic dairy herds through active and well planned AHW promotion and disease prevention. The project consists of 5 work packages, 4 of which comprise research activities building on current research projects, new applications across borders, exchange of knowledge, results and conclusions between participating countries, and adopting them to widely different contexts. International and national workshops facilitate this exchange. Focus areas are animal health planning, AHW assessment using animal based parameters and development of advisory systems and farmer groups. Epidemiological analyses of the effect on AHW from reduced medicine use and herd improvements are planned in all participating countries

The Effect of Smoking and Body Mass Index on The Complication Rate of Alloplastic Breast Reconstruction

Background and Aims: The aim of this study was to evaluate the effect of smoking and body mass index on the occurrence of complications after alloplastic breast reconstruction. Materials and Methods: A consecutive series of 56 patients treated with immediate or delayed alloplastic breast reconstruction, including six cases combined with latissimus dorsi flap, at three hospitals between 2012 and 2018 were included. Complications were scored and defined according to Clavien–Dindo. To evaluate the impact of smoking, body mass index, and other potential risk factors on the occurrence of any and severe complications, univariate and multivariate logistic regression analyses were applied to estimate odds ratios and 95% confidence intervals. Results: In 56 patients, 22 patients had a complication. As much as 46% of smokers had severe complications compared to 18% of non-smokers. Of patients with body mass index ⩾ 25, 40% had severe complications compared to 10% with body mass index < 25. Smokers had eight times more chance of developing severe complications than non-smokers (ORadjusted = 8.0, p = 0.02). Patients with body mass index ⩾ 25 had almost 10 times more severe complications compared to patients with body mass index ⩽ 25 (ORadjusted = 9.9, p = 0.009). No other risk factors were significant. Conclusion: Smoking and body mass index ⩾ 25 both increased the complication rate to such an extent that patients should be informed about their increased risk for complications following alloplastic breast reconstruction and on these grounds surgeons may delay alloplastic breast reconstruction. It is an ethical dilemma whether one should deny overweight and obese patients and those who smoke an immediate alloplastic breast reconstruction. For both life style interventions, adequate guidance should be made available