An “Unexpected” Rock Failure in a Limestone Open Pit Mine

On 28th October 2004 a rock failure occurred in a limestone open pit quarry in Tuscany (Italy). The phenomenon evolved slowly with the collapse of about 1000 cubic meters. The complex failure mechanism mainly involved plane sliding along stratifications with rotation and block toppling. The phenomenon continued to evolve slowly and on 3rd November failure extended to the neighbouring portion of rock with a total collapse of about 5000 cubic meters of rock. Failure analysis took advantage of an accurate characterization of geology, geometry and mechanical properties of the collapsed rock mass. Such analysis led to the conclusion that the failure has been caused by the concurrence of various factors, namely: - unfavourable dip and dip directions of stratification which daylight in the slope face; - possible reduction of the angle of shear resistance available along stratification especially as a consequence of intense rainfall and vibrations

Theoretical and Experimental Results from Laboratory Tests by ILCM

The Intermediate Linear Cutting Machine (ILCM) is a machine designed to work on an intermediate scale between the full- and the small-scale. The reduced scale involves several advantages compared to full-scale tests, especially in terms of sample supplying and transportation. On the other hand, it has an impact on the testing conditions, resulting in a limitation of the cutting penetration and spacing during the test, as well as in a smaller disc cutter. This affects most of the results, which cannot be directly used for the on-site machine performance prediction. However, some experimental results provided in the literature show that the optimal spacing/penetration ratio is not significantly affected by the changes involved. On this basis, the results obtained from ILCM tests should provide reliable information about the optimal cutting conditions of a tunnel boring machine (TBM) in massive rock mass. The work performed included the development of some improvements of the testing rig, as well as a modified ILCM testing procedure, according to the one typically used in standard LCM tests. The results provide information about the attitude of the tested lithotypes to mechanical excavation by means of disc tools, including the optimal cutting conditions. Additional work was developed in terms of detailed characterization of the rock samples involved and assessment of the size distribution of the debris produced during the ILCM tests. Nevertheless, further tests are necessary, in order to assess the consistency of the experimental procedure employed and to investigate the scale effect

Biliary and pancreatic stenting : devices and insertion techniques in therapeutic endoscopic retrograde cholangiopancreatography and endoscopic ultrasonography

Stents are tubular devices made of plastic or metal. Endoscopic stenting is the most common treatment for obstruction of the common bile duct or of the main pancreatic duct, but also employed for the treatment of bilio-pancreatic leakages, for preventing post- endoscopic retrograde cholangiopancreatography pancreatitis and to drain the gallbladder and pancreatic fluid collections. Recent progresses in techniques of stent insertion and metal stent design are represented by new, fully-covered lumen apposing metal stents. These stents are specifically designed for transmural drainage, with a saddle-shape design and bilateral flanges, to provide lumen-to-lumen anchoring, reducing the risk of migration and leakage. This review is an update of the technique of stent insertion and metal stent deployment, of the most recent data available on stent types and characteristics and the new applications for biliopancreatic stents

An Italian prospective multicenter study on colonoscopy practice and quality: What has changed in the last 10 years

Background: A relevant number of adenomas can be missed during colonoscopy. Aims: Assess the current status of colonoscopy procedures in Italian centers. Methods: A prospective observational study involving 17 hospitals (34 endoscopists) included consecutive patients undergoing standard colonoscopy. In the first phase, endoscopists performed consecutive colonoscopies. In the second phase, retraining via an online learning platform was planned, while in the third phase data were collected analogously to phase 1. Results: A total of 3,504 patients were enrolled. Overall, a BBPS score ≥6 was obtained in 95.6% of cases (94.8% and 96.9% in the pre- and post-training phases, respectively). 88.4% of colonoscopies had a withdrawal time ≥6 min (88.2% and 88.7% in the pre- and post-training phases). Median adenoma detection rate (ADR) was 39.1%, with no significant differences between the pre- and post-training phases (40.1% vs 36.9%; P = 0.83). In total, 81% of endoscopists had a ADR performance above the 25% threshold. Conclusion: High colonoscopy quality standards are achieved by the Italian hospitals involved. Quality improvement initiatives and repeated module-based colonoscopy-training have been promoted in Italy during the last decade, which appear to have had a significant impact on quality colonoscopy metrics together with the activation of colorectal cancer screening programs

Analysis of Fracture Mechanics Tests on Opalinus Clay

Many studies have recently been conducted to evaluate various mechanical characteristics of the Opalinus Clay (OPA) formation in view of its potential use as the hosting rock for the Swiss nuclear waste repositories. Its sedimentary bedding makes OPA a transversely isotropic rock and its directional mechanical properties need to be measured. This paper reports on an experimental and computational approach that was adopted to define the parallel-to-bedding fracture mechanics (FM) parameters of OPA in Mode-I. OPA cores from Mont Terri Underground Research Laboratory (URL) were submitted to laboratory tests on notched semi-circular specimens under three-point bending (SCB). In these tests, crack propagation is forced along the notch direction. However, the 45° bedding inclination of the specimen axis frequently deviated the crack from the expected direction. An analysis of the SCB tests was performed by means of non-linear FM techniques and the pertinent Mode-I parameters along the bedding were estimate