Loss and revival of coherence in the interaction between a positron beam and a photon field

We study the interaction between a positron beam in the single-particle regime in an interferometric configuration and a microwave electromagnetic field. We discuss the conditions under which quantum interference can be affected by the field and we outline its possible experimental study in the framework of QUantum interferometry and gravitation with Positrons and LASers (QUPLAS) experiment

Overview of the FTU results

Since the 2018 IAEA FEC Conference, FTU operations have been devoted to several experiments covering a large range of topics, from the investigation of the behaviour of a liquid tin limiter to the runaway electrons mitigation and control and to the stabilization of tearing modes by electron cyclotron heating and by pellet injection. Other experiments have involved the spectroscopy of heavy metal ions, the electron density peaking in helium doped plasmas, the electron cyclotron assisted start-up and the electron temperature measurements in high temperature plasmas. The effectiveness of the laser induced breakdown spectroscopy system has been demonstrated and the new capabilities of the runaway electron imaging spectrometry system for in-flight runaways studies have been explored. Finally, a high resolution saddle coil array for MHD analysis and UV and SXR diamond detectors have been successfully tested on different plasma scenarios

Overview of the FTU results

Since the 2016 IAEA Fusion Energy Conference, FTU operations have been mainly devoted to experiments on runaway electrons and investigations into a tin liquid limiter; other experiments have involved studies of elongated plasmas and dust. The tearing mode onset in the high density regime has been studied by means of the linear resistive code MARS, and the highly collisional regimes have been investigated. New diagnostics, such as a runaway electron imaging spectroscopy system for in-flight runaway studies and a triple Cherenkov probe for the measurement of escaping electrons, have been successfully installed and tested, and new capabilities of the collective Thomson scattering and the laser induced breakdown spectroscopy diagnostics have been explored

Progettazione e realizzazione di un sistema di analisi di superfici mediante spettroscopia di massa di ioni secondari (SIMS)

Printed from http://www.ifp.cnr.it target=NewWindow>www.ifp.cnr.it (March 2005)Consiglio Nazionale delle Ricerche - Biblioteca Centrale - P.le Aldo Moro, 7 , Rome / CNR - Consiglio Nazionale delle RichercheSIGLEITItal

Progetto e realizzazione di una camera per deposizione di film sottili presso l'IFP

Printed from http://www.ifp.cnr.it target=NewWindow>www.ifp.cnr.it (March 2005)Consiglio Nazionale delle Ricerche - Biblioteca Centrale - P.le Aldo Moro, 7 , Rome / CNR - Consiglio Nazionale delle RichercheSIGLEITItal

Ammonia formation and W coatings interaction with deuterium/nitrogen plasmas in the linear device GyM

In this work results of the first D-2/N-2 experiments in GyM, a linear device able to produce plasmas of interest for the ITER divertor (n(e) 5.10(10) cm(-3), Te 5 eV, ion flux 3-5.10(20) m(-2)s(-1)) are presented. Plasmas simulating a N-seeding scenario have been performed to evaluate ammonia formation and its effect on exposed W coatings. The presence of ND emission lines in the plasma can be correlated with the formation of ammonia, further directly detected and quantified by chromatography analysis of the exhaust. Four different W specimens were exposed in GyM to a plasma fluence of 8.78 . 10(33) m(-2). XPS analysis evidenced the formation of WxNy layers with nitrogen concentration in the range of 1-10% depending on the initial morphology and structure of the W samples. In all analyzed cases, nitrogen was bound and retained within the first 6 nm below the surface and no further diffusion of N into the bulk was observed

Matched calorimetric loads for high power millimeter-wave gyrotrons

High power gyrotron testing at long pulses is a necessary step in the development of mm-wave systems for fusion research. For this purpose a compact calorimetric load is being developed, with low overall reflectivity (<5%) and aiming at 1 MW-CW capabilities, after the good performances of the loads (0.5 MW, 0.5 s per pulse) installed on the 140 GHz ECRH plant of the FTU Tokamak in Frascati. Tests at the same frequency but at higher power (0.7 MW, 1 s) and longer pulses (up to 2 s at 0.5 MW) on the ASDEX-Upgrade ECRH plant showed, after repeated exposures, damages on the absorbing layer, recognized as thermal effects due to the local enhancement of incident power: the effects visible near the entrance port are explained studying the superposition (with interference) of waves reflected inside the sphere. Samples of degraded and non-degraded coating have been analyzed with various techniques, revealing changes of the substrate's physical characteristics. Measurements of absorber temperature during and after the pulse, performed with an infrared detector looking directly into the load, allowed estimates of the peak temperature and thermal properties of the coating in the real working conditions. Improvements on power deposition, geometry and cooling are proposed, to be integrated in a new load design