335 research outputs found
Giant microwave photoresistance of two-dimensional electron gas
We measure microwave frequency (4-40 GHz) photoresistance at low magnetic
field B, in high mobility 2D electron gas samples, excited by signals applied
to a transmission line fabricated on the sample surface. Oscillatory
photoresistance vs B is observed. For excitation at the cyclotron resonance
frequency, we find an unprecedented, giant relative photoresistance (\Delta
R)/R of up to 250 percent. The photoresistance is apparently proportional to
the square root of applied power, and disappears as the temperature is
increased.Comment: 4 pages, 3 figure
Recommended from our members
Millimeter-wave signal generation using an integrated mode-locked semiconductor laser and photodiode
A compact optoelectronic integrated circuit for generation of mm-wave frequencies is demonstrated. A monolithically integrated semiconductor ring laser, optical amplifier and waveguide photodiode are used to generate electrical signals up to 85.2 GHz
Recommended from our members
Monolithically integrated active waveguides and lasers using rare-earth doped spin-on glass
This LDRD program No. 3505.230 explored a new approach to monolithic integration of active waveguides and rare-earth solid state lasers directly onto III-V substrates. It involved selectively incorporating rare-earth ions into spin-on glasses (SOGs) that could be solvent cast and then patterned with conventional microelectronic processing. The patterned, rare-earth spin-on glasses (RESOGs) were to be photopumped by laser diodes prefabricated on the wafer and would serve as directly integrated active waveguides and/or rare-earth solid state lasers
Recommended from our members
Expanded-mode semiconductor laser with tapered-rib adiabatic-following fiber coupler
A new diode laser using a Tapered-Rib Adiabatic-Following Fiber Coupler to achieve 2D mode expansion and narrow, symmetric far-field emission without epitaxial regrowth or sharply-defined tips on tapered waveguides is presented
Recommended from our members
Mode-expanded semiconductor laser with tapered-rib adiabatic-following fiber coupler
Expanded-mode semiconductor lasers are of great interest due to the benefits of reduced far-field divergence and improved coupling efficiency to optical fiber. The authors present a new diode laser using a Tapered-Rib Adiabatic-Following Fiber Coupler (TRAFFiC) to achieve 2D mode expansion without epitaxial regrowth or sharply-defined tips on tapered waveguides. The expanded mode size would allow 0.25 to 1 dB coupling loss to standard telecommunications fiber making smaller-core specialty fibers unnecessary, increasing misalignment tolerance, and eliminating the need for coupling optics
Recommended from our members
NIR high-efficiency subwavelength diffractive structures in semiconductors
We have fabricated sub-wavelength diffractive optical elements with binary phase profiles for operation at 975 nm. Blazed transmission gratings with minimum features 63 nm wide were designed by using rigorous coupled-wave analysis and fabricated by direct-write e-beam lithography and reactive ion beam etching in gallium arsenide. Transmission measurements show 85% diffraction efficiency into the first order. Anti-reflection surfaces, with features 42 nm wide were also designed and fabricated
Recommended from our members
Multiple wavelength vertical-cavity surface-emitting laser arrays using surface-controlled MOCVD growth rate enhancement and reduction
Multiple-wavelength VCSEL and photodetector arrays are useful for wavelength-multiplexed fiberoptic networks, and for optical crosstalk isolation in parallel, free-space interconnects. Multiple wavelength VCSEL arrays have been obtained by varying the growth rate using thermal gradients caused by a backside-patterned substrate, by growth enhancement on a patterned substrate, and by varying the cavity length through anodic oxidation and selective etching of the wafer. We show here for the first time both the enhancement and the reduction of the growth rate of the entire VCSEL structure on a topographically patterned substrate, and demonstrate the controlled variation of the lasing wavelengths of a VCSEL array over an extended spectral range
Reconfigurable binary optical routing switches with fan-out based on the integration of GaAs/AlGaAs surface-emitting lasers and heterojunction phototransistors
Includes bibliographical references.The design, fabrication, and experimental demonstration of dynamically reconfigurable binary optical switches based on the integration of GaAs/AlGaAs vertical-cavity surface-emitting lasers and heterojunction phototransistors are reported. These new monolithic optical switches can perform spatial routing and optical amplification functions on input optical data with a fan-out of two, and can be programmed using simple voltage control. The 1 × 2 and 2 × 2 devices provide the basis for a high performance, two-dimensional optical switching fabric with electrical interfaces for optical switching and interconnection networks.The work at UNM was supported by Rome Laboratories (Griffiss AFB), the Advanced Research Projects Agency-MTO, and the Air Force Office of Scientific Research (Bolling AFB). The work performed at Sandia was supported by DOE Contract No. DE-AC04-76DP00789
Binary optical switch and programmable optical logic gate based on the integration of GaAs/AlGaAs surface-emitting lasers and heterojunction phototransistors
Includes bibliographical references.Optical switches based on GaAs/AlGaAs vertical-cavity surface-emitting lasers and heterojunction phototransistors are combined monolithically into new switching configurations that perform optical logic and spatial routing in a dynamically programmable manner. Using simple voltage control, many different logic and routing configurations, including AND and OR gates with variable fan-out, can be implemented using the same hardware.The work at UNM was supported by AFOSR (Bolling AFB), ARPA, and Rome Labs (Griffiss AFB). The Sandia effort was supported by DOE Contract No. DE-AC04-94AL85000
Molecular and morphometric variation in European populations of the articulate brachiopod <i>Terebeatulina retusa</i>
Molecular and morphometric variation within and between population samples of the articulate brachiopod <i>Terebratulina</i> spp., collected in 1985-1987 from a Norwegian fjord, sea lochs and costal sites in western Scotland, the southern English Channel (Brittany) and the western Mediterranean, were measured by the analysis of variation in the lengths of mitochondrial DNA (mtDNA) fragments produced by digestion with nine restriction endonucleases and by multivariate statistical analysis of six selected morphometric parameters. Nucleotide difference within each population sample was high. Nucleotide difference between population samples from the Scottish sites, both those that are tidally contiguous and those that appear to be geographically isolated, were not significantly different from zero. Nucleotide differences between the populations samples from Norway, Brittany, Scotland and the western Mediterranean were also very low. Morphometric analysis confirmed the absence of substantial differentiation
- …