21,833 research outputs found
A new model for the double well potential
A new model for the double well potential is presented in the paper. In the
new potential, the exchanging rate could be easily calculated by the
perturbation method in supersymmetric quantum mechanics. It gives good results
whether the barrier is high or sallow. The new model have many merits and may
be used in the double well problem.Comment: 3pages, 3figure
Can an observer really catch up with light
Given a null geodesic with a point in
conjugate to along , there will be a variation of
which will give a time-like curve from to . This is
a well-known theory proved in the famous book\cite{2}. In the paper we prove
that the time-like curves coming from the above-mentioned variation have a
proper acceleration which approaches infinity as the time-like curve approaches
the null geodesic. This means no observer can be infinitesimally near the light
and begin at the same point with the light and finally catch the light. Only
separated from the light path finitely, does the observer can begin at the same
point with the light and finally catch the light.Comment: 6 pages, no figures, submited to Physical Review
A Note on the Generalization of the GEMS Approach
This paper is a supplement of our earlier work JHEP 0410 (2004)
011[gr-qc/0409107].We map the vector potential of charged black holes into GEMS
and find that its effect on the thermal spectrum is the same as that on the
black hole side, i.e., it will induce a chemical potential in the thermal
spectrum which is the same as that in the charged black holes.We also argue
that the generalization of GEMS approach to non-stationary motions is not
possible.Comment: Latex file, 10 pages, no figure; v2: minor corrections; v3: revised
with title changed, one new section added and references adde
Recommended from our members
Experimental study on transcritical Rankine cycle (TRC) using CO2/R134a mixtures with various composition ratios for waste heat recovery from diesel engines
A carbon dioxide (CO2) based mixture was investigated as a promising solution to improve system performance and expand the condensation temperature range of a CO2 transcritical Rankine cycle (C-TRC). An experimental study of TRC using CO2/R134a mixtures was performed to recover waste heat of engine coolant and exhaust gas from a heavy-duty diesel engine. The main purpose of this study was to investigate experimentally the effect of the composition ratio of CO2/R134a mixtures on system performance. Four CO2/R134a mixtures with mass composition ratios of 0.85/0.15, 0.7/0.3, 0.6/0.4 and 0.4/0.6 were selected. The high temperature working fluid was expanded through an expansion valve and then no power was produced. Thus, current research focused on the analysis of measured operating parameters and heat exchanger performance. Heat transfer coefficients of various heat exchangers using supercritical CO2/R134a mixtures were provided and discussed. These data may provide useful reference for cycle optimization and heat exchanger design in application of CO2 mixtures. Finally, the potential of power output was estimated numerically. Assuming an expander efficiency of 0.7, the maximum estimations of net power output using CO2/R134a (0.85/0.15), CO2/R134a (0.7/0.3), CO2/R134a (0.6/0.4) and CO2/R134a (0.4/0.6) are 5.07 kW, 5.45 kW, 5.30 kW, and 4.41 kW, respectively. Along with the increase of R134a composition, the estimation of net power output, thermal efficiency and exergy efficiency increased at first and then decreased. CO2/R134a (0.7/0.3) achieved the maximum net power output at a high expansion inlet pressure, while CO2/R134a (0.6/0.4) behaves better at low pressure
Recommended from our members
Effect factors of part-load performance for various Organic Rankine cycles using in engine waste heat recovery
The Organic Rankine Cycle (ORC) is regarded as one of the most promising waste heat recovery technologies for electricity generation engines. Since the engine usually operates under different working conditions, it is important to research the part-load performance of the ORC. In order to reveal the effect factors of part-load performance, four different forms of ORCs are compared in the study with dynamic math models established in SIMULINK. They are the ORC applying low temperature working fluid R245fa with a medium heat transfer cycle, the ORCs with high temperature working fluid toluene heated directly by exhaust condensing at low pressure and high pressure, and the double-stage ORC. It is regarded that the more slowly the system output power decreases, the better part-load performance it has. Based on a comparison among the four systems, the effects of evaporating pressure, condensing condition, working fluid, and system structure on part-load performance are revealed in the work. Further, it is found that the system which best matches with the heat source not only performs well under the design conditions, but also has excellent part-load performance
Recommended from our members
Preliminary experimental comparison and feasibility analysis of CO2/R134a mixture in Organic Rankine Cycle for waste heat recovery from diesel engines
This paper presents results of a preliminary experimental study of the Organic Rankine Cycle (ORC) using CO2/R134a mixture based on an expansion valve. The goal of the research was to examine the feasibility and effectiveness of using CO2 mixtures to improve system performance and expand the range of condensation temperature for ORC system. The mixture of CO2/R134a (0.6/0.4) on a mass basis was selected for comparison with pure CO2 in both the preheating ORC (P-ORC) and the preheating regenerative ORC (PR-ORC). Then, the feasibility and application potential of CO2/R134a (0.6/0.4) mixture for waste heat recovery from engines was tested under ambient cooling conditions. Preliminary experimental results using an expansion valve indicate that CO2/R134a (0.6/0.4) mixture exhibits better system performance than pure CO2. For PR-ORC using CO2/R134a (0.6/0.4) mixture, assuming a turbine isentropic efficiency of 0.7, the net power output estimation, thermal efficiency and exergy efficiency reached up to 5.30 kW, 10.14% and 24.34%, respectively. For the fitting value at an expansion inlet pressure of 10 MPa, the net power output estimation, thermal efficiency and exergy efficiency using CO2/R134a (0.6/0.4) mixture achieved increases of 23.3%, 16.4% and 23.7%, respectively, versus results using pure CO2 as the working fluid. Finally, experiments showed that the ORC system using CO2/R134a (0.6/0.4) mixture is capable of operating stably under ambient cooling conditions (25.2–31.5 °C), demonstrating that CO2/R134a mixture can expand the range of condensation temperature and alleviate the low-temperature condensation issue encountered with CO2. Under the ambient cooling source, it is expected that ORC using CO2/R134a (0.6/0.4) mixture will improve the thermal efficiency of a diesel engine by 1.9%
The roles of deformation and orientation in heavy-ion collisions induced by light deformed nuclei at intermediate energy
The reaction dynamics of axisymmetric deformed Mg + Mg
collisions have been investigated systematically by an isospin-dependent
quantum molecular dynamics (IDQMD) model. It is found that different
deformations and orientations result in apparently different properties of
reaction dynamics. We revealed that some observables such as nuclear stopping
power (), multiplicity of fragments, and elliptic flow are very sensitive to
the initial deformations and orientations. There exists an eccentricity scaling
of elliptic flow in central body-body collisions with different deformations.
In addition, the tip-tip and body-body configurations turn out to be two
extreme cases in central reaction dynamical process.Comment: 5 pages, 7 figures, to appear in Physical Review C (Rapid
Communication
- …