130 research outputs found
Compliant actuation based on dielectric elastomers for a force-feedback device: modeling and experimental evaluation
Thanks to their large power densities, low costs and shock-insensitivity, Dielectric Elastomers (DE)seem to be a promising technology for the implementation of light and compact force-feedback devices such as,for instance, haptic interfaces. Nonetheless, the development of these kinds of DE-based systems is not trivialowing to the relevant dissipative phenomena that affect the DE when subjected to rapidly changingdeformations. In this context, the present paper addresses the development of a force feedback controller foran agonist-antagonist linear actuator composed of a couple of conically-shaped DE films and a compliantmechanism behaving as a negative-rate bias spring. The actuator is firstly modeled accounting for the viscohyperelasticnature of the DE material. The model is then linearized and employed for the design of a forcecontroller. The controller employs a position sensor, which determines the actuator configuration, and a forcesensor, which measures the interaction force that the actuator exchanges with the environment. In addition, anoptimum full-state observer is also implemented, which enables both accurate estimation of the time-dependentbehavior of the elastomeric material and adequate suppression of the sensor measurement noise. Preliminaryexperimental results are provided to validate the proposed actuator-controller architectur
Compliant actuation based on dielectric elastomers for a force-feedback device: modeling and experimental evaluation
Thanks to their large power densities, low costs and shock-insensitivity, Dielectric Elastomers (DE) seem to be a promising technology for the implementation of light and compact force-feedback devices such as, for instance, haptic interfaces. Nonetheless, the development of these kinds of DE-based systems is not trivial owing to the relevant dissipative phenomena that affect the DE when subjected to rapidly changing deformations. In this context, the present paper addresses the development of a force feedback controller for an agonist-antagonist linear actuator composed of a couple of conically-shaped DE films and a compliant mechanism behaving as a negative-rate bias spring. The actuator is firstly modeled accounting for the viscohyperelastic nature of the DE material. The model is then linearized and employed for the design of a force controller. The controller employs a position sensor, which determines the actuator configuration, and a force sensor, which measures the interaction force that the actuator exchanges with the environment. In addition, an optimum full-state observer is also implemented, which enables both accurate estimation of the time-dependent behavior of the elastomeric material and adequate suppression of the sensor measurement noise. Preliminary experimental results are provided to validate the proposed actuator-controller architecture 
Steady-state kinetics of ubiquinol-cytochrome c reductase in bovine heart submitochondrial particles: diffusional effects
Inhibitor sensitivity of respiratory complex I in human platelets: A possible biomarker of ageing
AbstractNADH-Coenzyme Q reductase was assayed in platelet mitochondrial membranes obtained from 19 pools of two venous blood samples from female young (19–30 years) individuals and 18 pools from aged ones (66–107 years). The enzyme activities were not significantly changed in the two groups, but a decrease of sensitivity to the specific inhibitor, rotenone, occurred in a substantial number of aged individuals. The results are in agreement with the predictions of the mitochondrial theory of ageing and may be used to develop a sensitive biomarker of the ageing process
Major changes in complex I activity in mitochondria from aged rats may not be detected by direct assay of NADH:coenzyme Q reductase
Electro-Elastic Model for Dielectric Elastomers
A continuum model is described for the study of the electro-elastic finite deformations of dielectric elastomers. The model: i) derives directly from a global energy balance; ii) does not require the postulation of any force or stresstensor of electrical origin; iii) only requires the knowledge of permittivity and shear moduli of the considered material; and iv) is presented in Lagrangian form which is suited for the implementation in multi-physic finite element simulation environments
Experimental Evaluation of Optimal Conically-Shaped Dielectric Elastomer Linear Actuators
A conically shaped Dielectric Elastomer (DE) linear
actuator is presented which is obtained by coupling a DE film
with a compliant mechanism. The compliant mechanism is
designed, by means of a pseudo-rigid-body model, to suitably
modify the force generated by the elastomer film. The resulting
actuator provides a nearly constant force along the entire
actuator stroke when the DE film is activated and returns
to an initial rest position when the DE film is deactivated.
Experimental activity fully validates the proposed concept.
Possible applications of this kind of actuator are Braille cells,
light weight robots and haptic devices
Experimental Evaluation of Optimal Conically-Shaped Dielectric Elastomer Linear Actuators
- …