Heat transfer from a flat plate in inhomogeneous regions of grid-generated turbulence

Experiments on the convective heat transfer from a flat plate, vertically mounted and parallel to the flow in a wind tunnel, were carried out via Infra-Red thermography and hot-wire anemometry. The Reynolds number based on the inflow velocity and on the length of the plate was about 5×1055×105. A step near the leading edge of the plate was used to promote transition to turbulence, with tripping effects on the heat transfer coefficients shown to be negligible for more than 90% of the plate’s length. Different types of grids, all with same blockage ratio σg=28%σg=28%, were placed upstream of the plate to investigate their potential to enhance the turbulent heat transfer. These grids were of three classes: regular square-mesh grids (RGs), single-square grids (SSGs) and multi-scale inhomogeneous grids (MIGs). The heat transfer coefficients at the mid-length of the plate were correlated with the mean velocity and the turbulence intensity of the flow at a distance from the plate at which the ratio of the standard deviations of the streamwise and wall-normal velocity fluctuations began to increase. However, the heat transfer was shown to be insensitive to the turbulence intensity of the incoming flow in close proximity of the tripping step. Furthermore, the integral length scale of the streamwise turbulent fluctuations was found not to affect the heat transfer results, both near the tripping step and in the well-developed region on the plate. For the smallest plate-to-grid distance, the strongest heat transfer enhancement (by roughly 30%) with respect to the no-grid case was achieved with one of the SSGs. For the largest plate-to-grid distance, the only grid producing an appreciable increase (by approximately 10%) of the heat transfer was one of the MIGs. The present results demonstrate that MIG design can be optimised to maximise the overall heat transfer from the plate. A MIG that produces a uniform transverse mean shear, which is approximately preserved over significant downstream distances from the grid and with a velocity decreasing with distance from the plate, allows a sustained heat transfer enhancement, in contrast to all other grid designs tested here. The most efficient configuration for a MIG is one for which the section of the grid that has lower blockage and thicker bars is adjacent to the plate

Experimental Research Using of MQL in Metal Cutting

In this paper an effect of using of minimal quantity lubrication (MQL) technique in turning operations is presented. Experimental research was performed on carbon steel C45E. Technological parameters: depth of cut, feed rate and cutting speed were adjusted to semi-machining and roughing. Higher values ​​of feed and cutting speed were used, than recommended from literature and different types of cooling and lubrication in turning conditions were applied. As a conventional procedure and technology, lubrication with flooding was applied. As special lubrication the MQL technique was used. During research, monitoring of the cutting force, chip shape, tool wear and surface roughness was performed. Relations between parameters, material machinability and economy of process were analyzed

Information Leakage Games

We consider a game-theoretic setting to model the interplay between attacker and defender in the context of information flow, and to reason about their optimal strategies. In contrast with standard game theory, in our games the utility of a mixed strategy is a convex function of the distribution on the defender's pure actions, rather than the expected value of their utilities. Nevertheless, the important properties of game theory, notably the existence of a Nash equilibrium, still hold for our (zero-sum) leakage games, and we provide algorithms to compute the corresponding optimal strategies. As typical in (simultaneous) game theory, the optimal strategy is usually mixed, i.e., probabilistic, for both the attacker and the defender. From the point of view of information flow, this was to be expected in the case of the defender, since it is well known that randomization at the level of the system design may help to reduce information leaks. Regarding the attacker, however, this seems the first work (w.r.t. the literature in information flow) proving formally that in certain cases the optimal attack strategy is necessarily probabilistic

CORRELATION OF MORPHOLOGIC AND PRODUCTION TRAITS OF HONEY BEE COLONIES FROM SERBIA

Abstract: State of mutual or reciprocal relationship between traits is determined by the correlation coefficients. Correlation of morphological and production traits was determined in two generations of honey bee colonies. In the first generation, mother queen bees were studied, and in the second generation, their offspring. The study of one generation lasted two years. Morphological traits were determined in the beginning of the study and production traits were determined in the spring and autumn inspections of every year. In the first generation, the positive and mostly high correlation between morphological traits, and honey yield and hygienic behaviour was determined. Correlation of morphological traits, colony strength and food supplies per colony ranged from highly positive to slightly negative values. It was found that there was a high correlation between some production traits (colony strength in the spring and autumn inspections and honey yield per colony). In the analysis of offspring (second generation), most traits that were positively correlated in mother generation now, also, showed a similar relationship. The only difference, in contrast to mother generation, was that, for most traits, the intensity of interaction increased

Competing magnetic fluctuations and orders in a multiorbital model of doped SrCo2_2As2_2

We revisit the intriguing magnetic behavior of the paradigmatic itinerant frustrated magnet $\rm{Sr}\rm{Co}_2\rm{As}_2$, which shows strong and competing magnetic fluctuations yet does not develop long-range magnetic order. By calculating the static spin susceptibility $\chi(\mathbf{q})$ within a realistic sixteen orbital Hubbard-Hund model, we determine the leading instability to be ferromagnetic (FM). We then explore the effect of doping and calculate the critical Hubbard interaction strength $U_c$ that is required for the development of magnetic order. We find that $U_c$ decreases under electron doping and with increasing Hund's coupling $J$, but increases rapidly under hole doping. This suggests that magnetic order could possibly emerge under electron doping but not under hole doping, which agrees with experimental findings. We map out the leading magnetic instability as a function of doping and Hund's coupling and find several antiferromagnetic phases in addition to FM. We also quantify the degree of itinerant frustration in the model and resolve the contributions of different orbitals to the magnetic susceptibility. Finally, we discuss the dynamic spin susceptibility, $\chi(\mathbf{q}, \omega)$, at finite frequencies, where we recover the anisotropy of the peaks at $\mathbf{Q}_\pi = (\pi, 0)$ and $(0, \pi)$ observed by inelastic neutron scattering that is associated with the phenomenon of itinerant magnetic frustration. By comparing results between theory and experiment, we conclude that the essential experimental features of doped SrCo$_2$As$_2$ are well captured by a Hubbard-Hund multiorbital model if one considers a small shift of the chemical potential towards hole doping.Comment: 19 pages, 12 figure

NAJVAŽNIJE BOLESTI PASA I MA9AKA I NOVI TRENDOVI U IMUNOPROFILAKSI

..

From error bounds to the complexity of first-order descent methods for convex functions

This paper shows that error bounds can be used as effective tools for deriving complexity results for first-order descent methods in convex minimization. In a first stage, this objective led us to revisit the interplay between error bounds and the Kurdyka-\L ojasiewicz (KL) inequality. One can show the equivalence between the two concepts for convex functions having a moderately flat profile near the set of minimizers (as those of functions with H\"olderian growth). A counterexample shows that the equivalence is no longer true for extremely flat functions. This fact reveals the relevance of an approach based on KL inequality. In a second stage, we show how KL inequalities can in turn be employed to compute new complexity bounds for a wealth of descent methods for convex problems. Our approach is completely original and makes use of a one-dimensional worst-case proximal sequence in the spirit of the famous majorant method of Kantorovich. Our result applies to a very simple abstract scheme that covers a wide class of descent methods. As a byproduct of our study, we also provide new results for the globalization of KL inequalities in the convex framework. Our main results inaugurate a simple methodology: derive an error bound, compute the desingularizing function whenever possible, identify essential constants in the descent method and finally compute the complexity using the one-dimensional worst case proximal sequence. Our method is illustrated through projection methods for feasibility problems, and through the famous iterative shrinkage thresholding algorithm (ISTA), for which we show that the complexity bound is of the form $O(q^{k})$ where the constituents of the bound only depend on error bound constants obtained for an arbitrary least squares objective with $\ell^1$ regularization

A possible connection between phosphate tungsten bronzes properties and briggs-rauscher oscillatory reaction response

The calcium phosphate tungsten bronze (Ca-PWB) has been synthesized and characterized (TGA, DSC, XRPD, FTIR, SEM). The influence of solid insoluble materials Ca-PWB, as well as lithium doped (Li-PWB) and cation free phosphate tungsten (PWB) bronzes on the oscillatory Briggs-Rauscher (BR) reaction dynamics, is compared. The results show that doping with Li and Ca reduces sensitivity of the BR reaction towards bronzes addition. These findings suggest the usage of the BR reaction as an innovative method for testing of different properties of bronze material. The behavior of PWB in the BR reaction is significantly changed with divalent cation (Ca2+) doping. The reasons for the different bronzes behavior were found in their calculated unit cell volumes. Namely, the compressed Ca-PWB unit cell volume indicates the difficult availability of the active site for heterogeneous catalysis. Hence, the linear correlation (slope) of the BR oscillogram’s length (τosc) vs. mass of bronze in BR reaction might be considered as a new parameter for the evaluation of the bronzes catalytic activity.У овом раду синтетисана је и окарактерисана (TGA, DSC, XRPD, FTIR, SEM) нова калцијумом допирана фосфат волфрамова бронза (Ca-PWB). Испитан је и упоређен утицај фосфат волфрамове бронзе (PWB), литијумом допиране фосфат волфрамове бронзе (Li-PWB) и калцијумом допиране фосфат волфрамове бронзе (Ca-PWB) на осцилаторну динамику Briggs-Rauscher (БР) реакције. Резултати показују да допирање катјонима Li+ и Ca2+ смањује осетљивост БР реакције на додатак нерастворних бронзи, што се огледа у смањивању нагиба праве осцилаторног времена (τosc) БР реакције у функцији масе додате допиране бронзе. Добијени резултати сугеришу употребу БР реакције као иновативне методе за испитивање различитих својстава допираних и недопиране фосфат волфрамове бронзе. Разлози за различито понашање бронзи у осцилаторној реакцији пронађени су у различитим величинама јединичних ћелија PWB, Li-PWB и Ca-PWB. Наиме, најмања вредност, тј. сабијање јединичне ћелије допирањем калицијумом указује на тежу доступност активних места за хетерогену катализу. Каталитичка активност бронзи усмерена је ка реакцијама оксидације које укључују водоник-пероксид (један од реактаната БР реакције). Стога би се линеарна корелација (нагиб) τosc у функцији масе бронзе у БР реакцији могла сматрати новим параметром за процену каталитичке активности бронзе, али и других материјала

Which health professionals are most at risk for cardiovascular disease? Or do not be a manager

Objectives: Health care workers constitute a high-risk occupational category owing to the character of their work that includes high-risk environment, shift work and mental as well as physical stress. In occupational medicine, caring for their health condition should be a priority and include measures aimed at preventing cardiovascular diseases. The study aimed at determining the prevalence of cardiovascular disease (CVD) risk factors in employees of a large hospital and assessing their effect on the incidence of cardiovascular events. Materials and Methods: The group comprised 3124 employees with a mean age of 36.1 years (SD = 11.4), out of whom 562 were males (mean age of 37.1 years, range: 18-72; SD = 12.26) and 2562 were females (mean age of 35.9 years, range: 18-68; SD = 11.24). At their initial examination, the employees filled in a questionnaire on basic CVD risk factors (according to valid recommendations). This was supplemented with objective data to determine the risk of CVD using valid charts. From this group, a subset of persons at a high or intermediate risk was selected, comprising 247 individuals with a mean age of 54.1 years (SD = 5.73). After 5-9 years (mean 7.24±1.38 years), they either underwent another examination or their health status was ascertained by phone or in a computer database. The end point was the incidence of cardiovascular events (sudden death, acute myocardial infarction, unstable angina pectoris, percutaneous coronary intervention, cardiac failure, stroke or transient ischemic attack). Results: The end point was noted in a total of 15 males (6.07%) and 6 females (2.42%), being statistically significantly present in managers (males p < 0.00007, females p < 0.00001), male physicians/surgeons (p < 0.025), tertiary-educated males (p < 0.0095), female smokers (p < 0.015), male ex-smokers (p < 0.007), overweight or obese males (p < 0.02) and those with the waist-to-hip ratio above 1.0 (p < 0.005). Conclusions: Cardiovascular events are most likely to occur in obese male physicians/surgeons holding managerial positions and in female managers