Planck pre-launch status: Expected LFI polarisation capability

We present a system-level description of the Low Frequency Instrument (LFI) considered as a differencing polarimeter, and evaluate its expected performance. The LFI is one of the two instruments on board the ESA Planck mission to study the cosmic microwave background. It consists of a set of 22 radiometers sensitive to linear polarisation, arranged in orthogonally-oriented pairs connected to 11 feed horns operating at 30, 44 and 70 GHz. In our analysis, the generic Jones and Mueller-matrix formulations for polarimetry are adapted to the special case of the LFI. Laboratory measurements of flight components are combined with optical simulations of the telescope to investigate the values and uncertainties in the system parameters affecting polarisation response. Methods of correcting residual systematic errors are also briefly discussed. The LFI has beam-integrated polarisation efficiency >99% for all detectors, with uncertainties below 0.1%. Indirect assessment of polarisation position angles suggests that uncertainties are generally less than 0°.5, and this will be checked in flight using observations of the Crab nebula. Leakage of total intensity into the polarisation signal is generally well below the thermal noise level except for bright Galactic emission, where the dominant effect is likely to be spectral-dependent terms due to bandpass mismatch between the two detectors behind each feed, contributing typically 1–3% leakage of foreground total intensity. Comparable leakage from compact features occurs due to beam mismatch, but this averages to < 5 × 10^(-4) for large-scale emission. An inevitable feature of the LFI design is that the two components of the linear polarisation are recovered from elliptical beams which differ substantially in orientation. This distorts the recovered polarisation and its angular power spectrum, and several methods are being developed to correct the effect, both in the power spectrum and in the sky maps. The LFI will return a high-quality measurement of the CMB polarisation, limited mainly by thermal noise. To meet our aspiration of measuring polarisation at the 1% level, further analysis of flight and ground data is required. We are still researching the most effective techniques for correcting subtle artefacts in polarisation; in particular the correction of bandpass mismatch effects is a formidable challenge, as it requires multi-band analysis to estimate the spectral indices that control the leakage

A Study of Time and Labour Use on Irish Suckler Beef Farms

End of project reportLabour is one of the four factors of production and an increasingly costly and scarce input on farms. The attractiveness of non-farming employment, the nature of farm work and the price received for farm outputs are resulting in falling levels of hired and family labour

Criteria for reachability of quantum states

We address the question of which quantum states can be inter-converted under the action of a time-dependent Hamiltonian. In particular, we consider the problem applied to mixed states, and investigate the difference between pure and mixed-state controllability introduced in previous work. We provide a complete characterization of the eigenvalue spectrum for which the state is controllable under the action of the symplectic group. We also address the problem of which states can be prepared if the dynamical Lie group is not sufficiently large to allow the system to be controllable.Comment: 14 pages, IoP LaTeX, first author has moved to Cambridge university ([email protected]

Review of the Supply of and Demand for Further Education in Scotland

These documents provide are an Executive Summary and Full Report of the background to, methodology for, and overall conclusions and recommendations of a review of the supply of and demand for Further Education (FE) provision in Scottish Further Education colleges in 2000. The review was commissioned by the Scottish Further Education Funding Council (SFEFC), and carried out between November 1999 and June 2000 by a team of researchers drawn from the Scottish Further Education Unit (SFEU), the Centre for Research in Lifelong Learning, Glasgow Caledonian University/University of Stirling, and the Applied Statistics Group, Napier University

Color in computing

Color in the computing environment, once considered a luxury, is becoming more available compared to being just the occasional exception. As the number of users exploring the uses of color through displayed and printed images increases, the problems associated with its use are becoming widely known. What worked in black and white is not easily translated into color. The use of color needs to begin with the basic understanding of what is color, its terminology and its utilization as an enhancement to communications tool. Only after the basic terminology and effective means of communication are understood will color flourish as a successful means of communication in the computing environment. Currently, a number of products are seen as solutions in the realm of color usage in the computing environment. Four different contributions, PostScript Level 2 (Adobe), PhotoYCC(Eastman Kodak), Pantone Matching System (Pantone), and TekHVC (Tektronix), each deliver a component of electronic color reproduction. PostScript Level 2 delivers consistent color from monitor to printer, with variations based on printer manufacture and the printing technology utilized. PhotoYCC defines a format for image capture and retrieval with a wealth of possibilities for image sources. Pantone Matching System expands the accessibility of simulated prepress work, coupled with ink formulation and quality control. Tektronix attempted to define TekHVC as an industry standard based on a more uniform color space than that which is defined by previous industry standards. Because of the lack of acceptance, Tektronix has limited this solution to their printers. Solutions are abundant, but as costs continue to fall, the expectation of consistent color will rise. The adoption of standards across operating environments and software packages is critical to continued increase of the use of color in the computing environment

An Analysis of the Broadband (22-3900 MHz) Radio Spectrum of HB3 (G132.7+1.3): The Detection of Thermal Radio Emission from an Evolved Supernova Remnant?

We present an analysis of the broadband radio spectrum (from 22 to 3900 MHz) of the Galactic supernova remnant (SNR) HB3 (G132.7+1.3). Published observations have revealed that a curvature is present in the radio spectrum of this SNR, indicating that a single synchrotron component appears is insufficient to adequately fit the spectrum. We present here a fit to this spectrum using a combination of a synchrotron component and a thermal bremsstrahlung component. We discuss properties of this latter component and estimate the ambient density implied by the presence of this component to be n \~ 10 cm^-3. We have also analyzed extracted X-ray spectra from archived {\it ASCA} GIS observations of different regions of HB3 to obtain independent estimates of the density of the surrounding interstellar medium (ISM). From this analysis, we have derived electron densities of 0.1-0.4 f^-1/2 cm^-3 for the ISM for the three different regions of the SNR, where f is the volume filling factor. By comparing these density estimates with the estimate derived from the thermal bremsstrahlung component, we argue that the radio thermal bremsstrahlung emission is emitted from a thin shell enclosing HB3. The presence of this thermal bremsstrahlung component in the radio spectrum of HB3 suggests that this SNR is in fact interacting with an adjacent molecular cloud associated with the HII region W3. By extension, we argue that the presence of thermal emission at radio wavelengths may be a useful tool for identifying interactions between SNRs and molecular clouds, and for estimating the ambient density near SNRs using radio continuum data.Comment: 5 pages, 2 figures, accepted for ApJ

Effects of a winter forage crop rotation on CO2 fluxes at a managed grassland

Temperate grasslands have the potential to sequester carbon, helping to mitigate rising atmospheric CO2 concentrations. The ability of grasslands to absorb CO2 is influenced by site elevation, soil type, management practices, climate and climatic variability. There is a need for long-term observations and field experiments to quantify the effects of the key drivers of management and climate variability. This paper presents over 4 years of eddy covariance measurements of CO2 flux over a managed temperate grassland site in south-east Ireland. For the first 2 years the entire study area was under grass. During the second 2 years a winter forage crop was grown over part of the site. The site was found to have a net uptake of CO2 during all years. However, the magnitude of the CO2 uptake varied considerably from year to year, with a maximum net uptake of 1.32 kg CO2 m−2 in 2004, a year with no winter forage crop. Net uptakes were much lower in the 2 years of mixed grass and kale cultivation, but detailed analysis of the measurement footprint and statistical comparisons showed that this was not due to the introduction of the forage rotation. For a short period following sowing of the forage crop, daytime CO2 uptake was less than that of the area under grass, but over subsequent months daytime CO2 uptake of the kale areas recovered strongly and exceeded that of the grass areas. The net effect over the year following kale planting is close to CO2-neutral

Short duration rainfall extremes in Ireland: influence of climatic variability

A widely-noted change in the North Atlantic circulation in the 1970s affected the spatial distribution and seasonal pattern of rainfall over Ireland. To examine if this was accompanied by a change on short duration precipitation extremes, multi-decadal time series from the second half of the twentieth century of thirteen hourly precipitation stations in Ireland have been analysed for the occurrence of extreme values over several durations of up to 24 h. Strong evidence was found for a change since the late 1970s in short duration rainfall depths, particularly in the west of the country. Precipitation depth-duration-frequency analyses over two sub-periods showed that at several locations, storm event magnitudes which corresponded to a 30 year return period before 1975 had a return period close to 10 years in the post-1975 period. The widespread increase in spring and autumn rainfall and the local increases in the frequencies and magnitudes of severe rainfalls have implications for engineering hydrology, flood risk analysis and water resources management. The necessity of using up-to-date data to derive design storm magnitudes is stressed, due to the possible influence of underlying climatic shifts. Furthermore, as non-stationarity has been demonstrated, the use of long timeseries extending beyond thirty years into the past will result in underestimation of storm intensities in many areas

System operational costs reduction with non-conventional reactive power sources

Wind energy installations are increasing in power systems worldwide and wind generation capacity tends to be located some distance from load centers. A conflict may arise at times of high wind generation when it becomes necessary to curtail wind energy in order to maintain conventional generators on-line for the provision of voltage control support at load centers. Using the island of Ireland as a case study and presenting commercially available reactive power support devices as possible solutions to the voltage control problems in urban areas, this paper explores the reduction in total generation costs resulting from the relaxation of the operational constraints requiring conventional generators to be kept on-line near load centers for reactive power support. The paper shows that by 2020 there will be possible savings of 87€m per annum and a reduction in wind curtailment of more than a percentage point if measures are taken to relax these constraints

Quantifying the value of improved wind energy forecasts in a pool-based electricity market

This work illustrates the influence of wind forecast errors on system costs, wind curtailment and generator dispatch in a system with high wind penetration. Realistic wind forecasts of different specified accuracy levels are created using an auto-regressive moving average model and these are then used in the creation of day-ahead unit commitment schedules. The schedules are generated for a model of the 2020 Irish electricity system with 33% wind penetration using both stochastic and deterministic approaches. Improvements in wind forecast accuracy are demonstrated to deliver: (i) clear savings in total system costs for deterministic and, to a lesser extent, stochastic scheduling; (ii) a decrease in the level of wind curtailment, with close agreement between stochastic and deterministic scheduling; and (iii) a decrease in the dispatch of open cycle gas turbine generation, evident with deterministic, and to a lesser extent, with stochastic scheduling