Ultra-fast magnetisation rates within the Landau-Lifshitz-Bloch model

The ultra-fast magnetisation relaxation rates during the laser-induced magnetisation process are analyzed in terms of the Landau-Lifshitz-Bloch (LLB) equation for different values of spin $S$. The LLB equation is equivalent in the limit $S \rightarrow \infty$ to the atomistic Landau-Lifshitz-Gilbert (LLG) Langevin dynamics and for $S=1/2$ to the M3TM model [B. Koopmans, {\em et al.} Nature Mat. \textbf{9} (2010) 259]. Within the LLB model the ultra-fast demagnetisation time ($\tau_{M}$) and the transverse damping ($\alpha_{\perp}$) are parameterized by the intrinsic coupling-to-the-bath parameter $\lambda$, defined by microscopic spin-flip rate. We show that for the phonon-mediated Elliott-Yafet mechanism, $\lambda$ is proportional to the ratio between the non-equilibrium phonon and electron temperatures. We investigate the influence of the finite spin number and the scattering rate parameter $\lambda$ on the magnetisation relaxation rates. The relation between the fs demagnetisation rate and the LLG damping, provided by the LLB theory, is checked basing on the available experimental data. A good agreement is obtained for Ni, Co and Gd favoring the idea that the same intrinsic scattering process is acting on the femtosecond and nanosecond timescale.Comment: 9 pages, 7 figure

Fairness as “appropriate impartiality” and the problem of the self-serving bias

Garrett Cullity contends that fairness is appropriate impartiality (See Cullity (2004) Chapters 8 and 10 and Cullity (2008)). Cullity deploys his account of fairness as a means of limiting the extreme moral demand to make sacrifices in order to aid others that was posed by Peter Singer in his seminal article ‘Famine, Affluence and Morality’. My paper is founded upon the combination of (1) the observation that the idea that fairness consists in appropriate impartiality is very vague and (2) the fact that psychological studies show the self-serving bias is especially likely to infect one’s judgements when the ideas involved are vague. I argue that Cullity’s solution to extreme moral demandingness is threatened by these findings. I then comment on whether some other theories of fairness are vulnerable to the same objection

Quenching of lamellar ordering in an n-alkane embedded in nanopores

We present an X-ray diffraction study of the normale alkane nonadecane C_{19}H_{40} embedded in nanoporous Vycor glass. The confined molecular crystal accomplishes a close-packed structure by alignment of the rod-like molecules parallel to the pore axis while sacrificing one basic principle known from the bulk state, i.e. the lamellar ordering of the molecules. Despite this disorder, the phase transitions observed in the confined solid mimic the phase behavior of the 3D unconfined crystal, though enriched by the appearance of a true rotator phase known only from longer alkane chains.Comment: 7 pages, 3 figure

Pyrrhic Pyrrhonism

Journal compilation © 20098 The Editors of The Philosophical QuarterlyGarrett Cullit

Decisions, Reasons and Rationality

Garrett Cullit

The Effect of Transfer Printing on Pentacene Thin-Film Crystal Structure

The thermal deposition and transfer Printing method had been used to produce pentacene thin-films on SiO2/Si and plastic substrates (PMMA and PVP), respectively. X-ray diffraction patterns of pentacene thin films showed reflections associated with highly ordered polycrystalline films and a coexistence of two polymorph phases classified by their d-spacing, d(001): 14.4 and 15.4 A.The dependence of the c-axis correlation length and the phase fraction on the film thickness and printing temperature were measured. A transition from the 15.4 A phase towards 14.4 A phase was also observed with increasing film thickness. An increase in the c-axis correlation length of approximately 12% ~16% was observed for Pn films transfer printed onto a PMMA coated PET substrate at 100~120 C as compared to as-grown Pn films on SiO2/Si substrates. The transfer printing method is shown to be an attractive for the fabrication of pentacene thin-film transistors on flexible substrates partly because of the resulting improvement in the quality of the pentacene film.Comment: 5 pages, 5 figure

Magnetic properties of HO2 thin films

We report on the magnetic and transport studies of hafnium oxide thin films grown by pulsed-laser deposition on sapphire substrates under different oxygen pressures, ranging from 10-7 to 10-1 mbar. Some physical properties of these thin films appear to depend on the oxygen pressure during growth: the film grown at low oxygen pressure (P ~= 10-7 mbar) has a metallic aspect and is conducting, with a positive Hall signal, while those grown under higher oxygen pressures (7 x 10-5 <= P <= 0.4 mbar) are insulating. However, no intrinsic ferromagnetic signal could be attributed to the HfO2 films, irrespective of the oxygen pressure during the deposition.Comment: 1

Spin Disorder and Magnetic Anisotropy in Fe3O4 Nanoparticles

We have studied the magnetic behavior of dextran-coated magnetite (Fe$_3$O$_4$) nanoparticles with median particle size \left=8 $nm$. Magnetization curves and in-field M\"ossbauer spectroscopy measurements showed that the magnetic moment $M_S$ of the particles was much smaller than the bulk material. However, we found no evidence of magnetic irreversibility or non-saturating behavior at high fields, usually associated to spin canting. The values of magnetic anisotropy $K_{eff}$ from different techniques indicate that surface or shape contributions are negligible. It is proposed that these particles have bulk-like ferrimagnetic structure with ordered A and B sublattices, but nearly compensated magnetic moments. The dependence of the blocking temperature with frequency and applied fields, $T_B(H,\omega)$, suggests that the observed non-monotonic behavior is governed by the strength of interparticle interactions.Comment: 11 pages, 7 figures, 3 Table

Validity of the N\'{e}el-Arrhenius model for highly anisotropic Co_xFe_{3-x}O_4 nanoparticles

We report a systematic study on the structural and magnetic properties of Co_{x}Fe_{3-x}O_{4} magnetic nanoparticles with sizes between $5$ to $25$ nm, prepared by thermal decomposition of Fe(acac)_{3} and Co(acac)_{2}. The large magneto-crystalline anisotropy of the synthesized particles resulted in high blocking temperatures ($42$ K \leqq $T_B$ $\leqq 345$ K for $5 \leqq$ d $\leqq 13$ nm ) and large coercive fields ($H_C \approxeq 1600$ kA/m for $T = 5$ K). The smallest particles ($=5$ nm) revealed the existence of a magnetically hard, spin-disordered surface. The thermal dependence of static and dynamic magnetic properties of the whole series of samples could be explained within the N\'{e}el-Arrhenius relaxation framework without the need of ad-hoc corrections, by including the thermal dependence of the magnetocrystalline anisotropy constant $K_1(T)$ through the empirical Br\"{u}khatov-Kirensky relation. This approach provided $K_1(0)$ values very similar to the bulk material from either static or dynamic magnetic measurements, as well as realistic values for the response times ($\tau_0 \simeq 10^{-10}$ s). Deviations from the bulk anisotropy values found for the smallest particles could be qualitatively explained based on Zener\'{}s relation between $K_1(T)$ and M(T)

Reversible switching of room temperature ferromagnetism in CeO2-Co nanoparticles

We investigated the reversible ferromagnetic (FM) behavior of pure and Co doped CeO2 nanopowders. The as-sintered samples displayed an increasing paramagnetic contribution upon Co doping. Room temperature FM is obtained simply by performing thermal treatments in vacuum at temperatures as low as 500^{\circ}C and it can be switched off by performing thermal treatments in oxidizing conditions. The FM contribution is enhanced as we increase the time of the thermal treatment in vacuum. Those systematic experiments establish a direct relation between ferromagnetism and oxygen vacancies and open a path for developing materials with tailored properties.Comment: 20 pages, 3 figures; Applied Physics Letters Vol. 100, Issue 17, APR201