The Use of Tea leaves Wastes to reduce Hexavalent Chromium Concentration in industrial Waste Water by Adsorption

Abstract : A research was conducted to study the process parameters affecting hexavalent chromium Cr (VI) (carcinogenic compound) the removal percentage from the electrical industries company waste water that contain 88 mg/l of Cr (VI) concentration by adsorption onto tea wastes. Synthetic water with 88 mg/l Cr (VI) concentration was used. Several operation parameters affecting Cr (VI) removal efficiency were investigated, such as pH, initial Cr (VI) concentration, stirring time and tea wastes dose. The experimental results reveal that maximum Cr (VI) removal reached up to 94.26% at pH of 2, stirring time of 180 minute, tea wastes dose of 8gm/100 ml and the equilibrium was attained at 180 minute. Langmuir and Freundlich adsorption isotherm models were analyzed and the experimental results fit very well with Freundlich model

Experimental Models of Duchenne Muscular Dystrophy: Relationship with Cardiovascular Disease

Almost every boy that has Duchenne Muscular Dystrophy (DMD) will develop cardiac problems. Whereas, it used to be respiratory problems that was the main cause of death in these DMD boys; with the advent of better respiratory care it is now the cardiac involvement that is becoming the most common cause of their death. Once the heart is affected, there is progressive deterioration in the function of the heart over time. The main problem is the death of the cardiomyocytes. The cause of the cardiomyocyte death is due to the loss of dystrophin, this makes the sarcolemma more susceptible to damage, and leads to a cascade of calcium influx, calcium activated proteases and ultimately the death of the cardiomyocyte. The dead cardiomyocytes are replaced by fibrotic tissue, which results in a dilated cardiomyopathy (DCM) developing, which begins in the base of the left ventricle and progresses to involve the entire left ventricle. The treatments used for the DMD cardiomyopathy are based on ones designed for other forms of cardiac weakness and include ACE-inhibitors and β-blockers. New therapies based around the pathophysiology in DMD are now being introduced. This review will look at the pathophysiology of the cardiac problems in DMD and how the various animal models that are available can be used to design new treatment options for DMD boys

Analytical Investigation of Higher Education Quality Improvement by Using Six Sigma Approach

For over two decades in India, the technical industry's unique selling proposition (USP), with its wide infrastructure of technical institutes, has been capable of supplying best-in-class engineers. But recently, this claim does not hold water. According to the All India Council for Technical Education (AICTE), about 2.6 lakh mechanical engineers graduate every year in India. But the real count of industry ready mechanical engineers is approximately 7%. Hence, there is a need to assess the quality of engineering education in India to reduce the flaws in higher education. The purpose of the paper is to identify the various defects associated with technical education and eliminate those defects using various quality tools. This research is based on the six sigma technique, which is used to assess the quality criteria proposed by the National Board of Accreditation India (NBA). The proposed model is then applied to a typical tier II Indian engineering college located in south India. Six Sigma has two main methodologies: DMAIC and DFSS. The DMAIC (Define, Measure, Analyze, Improve, and Control) methodology is implemented for existing systems, whereas DFSS (Design for Six Sigma) is for assuring quality in new products. In this project, the conclusion is driven by the DMAIC methodology. Various statistical and non-statistical tools are employed in this research. The tools used are CTS-CTQ, SIPOC, Pareto chart, normal process capability analysis, one-way ANOVA, Ishikawa diagram, FMEA, RCBD, and SPC chart. All the statistical processes are done using Minitab analytical software. From the results, it is identified that the factors that have a risk priority number (RPN) greater than 300 need improvement, such as versatility in program curriculum, laboratories and workshops, and credibility among universities. Six Sigma can be achieved by developing proper strategies for mitigating these defects. Doi: 10.28991/HIJ-2022-03-02-07 Full Text: PD

Effect of Laser Irradiation on the Optical Properties of SnO2 films Deposited by Post Oxidation of metal Films

Tin oxide films (SnO2) of thickness (1 ?m) are prepared on glass substrate by post oxidation of metal films technique. Films were irradiated with Nd:YAG double frequency laser of wavelength (532 nm) pulses of three energies (100, 500, 1000) mJ. The optical absorption, transmission, reflectance, refractive index and optical conductivity of these films are investigated in the UV-Vis region (200-900) nm. It was found that the average transmittance of the films is around (80%) at wavelength (550 nm) and showed high transmission (? 90 %) in the visible and near infrared region. The absorption edge shifts towards higher energies, which is due to the Moss-Burstien effect and it lies at (4 eV). The optical band gap increased with increasing of energy

Contemplation Impact of Pulp Seeds Cucurbita Pepo L. and its Paste on Oxidative Stress in Rats

Cucurbita Pepo L. seeds and seeds paste which are rich sources of phytochemicals and act as a rich source of antioxidants. The most important phytochemicals present in the cucurbits are cucurbitacin’s, saponins, carotenoids, phytosterols, and polyphenols. These bioactive phyto-constituents are responsible for the pharmacological effects including antioxidant effect. Aim of this study was to investigate the effect of Cucurbita Pepo L. seeds and seeds paste on rats suffering from oxidative stress. Thirty-six male albino rats were used in the experiment (Sprague-Dawley strain). The animals randomly divided 6 rats each group according to the following the first Group: Rats were fed basal diet and set as negative control. The other rats (n = 30) were fed on basal diet containing monosodium glutamate (120 mg/kg) for induce stress condition. After that, rats further divided into 5 groups (n = 6) each for six weeks as follows: -2nd Group: Rats were fed on basal diet containing monosodium glutamate and set as positive control. 3rd Group: Rats were fed on diet containing monosodium glutamate with addition of Cucurbita Pepo L. seeds 5%. 4th Group: Rats were fed on diet containing monosodium glutamate with addition of Cucurbita Pepo L. seeds 10%. 5th Group: Rats were fed on diet containing monosodium glutamate with addition of Cucurbita Pepo L. seeds paste 5%. 6th Group: Rats were fed on diet containing monosodium glutamate with addition of Cucurbita Pepo L. seeds paste 10%. The experimental period was six weeks; Blood samples were collected. At the end of the experiment, the results showed that using seeds 5% & 10% and seeds paste 5% & 10% in feeding the stressed rats increased (BWG%, FI, FER, Superoxide dismutase (SOD), catalase and glutathione peroxidase (GPx)) with highest results in group fed on 10% seeds paste and decreased (Urea, Creatinine, ALT, AST, IL-6 and INF-gamma) with lowest results in group fed on 10% Cucurbita Pepo L. seeds paste

FORMULATION AND EVALUATION OF FAST DISSOLVING TABLET OF KETOROLAC TROMETHAMINE

Aim: Ketorolac tromethamine is used for the treatment of a number of infections including infection of joints and bones, gastroenteritis, malignant otitis externa, respiratory tract infections, cellulitis, urinary tract infections, anthrax, skin structural infections, and typhoid fever, and it also used in the treatment of community-acquired pneumonia, chronic bacterial prostatitis, and nosocomial pneumonia. Objective: Difficulty in swallowing (dysphasia) is a common problem of all age groups, especially the elderly and pediatrics, due to physiological changes associated with these groups. Conclusion: In the present work, it has been observed from all formulations of pre-compression and post-compression studies were given within the limit of values. The in vitro dissolution data, F1 (combination of different superdisintegrants) when compared to other formulation

Extended Micromorphic Computational Homogenization for Mechanical Metamaterials Exhibiting Multiple Geometric Pattern Transformations

Honeycomb-like microstructures have been shown to exhibit local elastic buckling under compression, with three possible geometric buckling modes, or pattern transformations. The individual pattern transformations, and consequently also spatially distributed patterns, can be induced by controlling the applied compression along two orthogonal directions. Exploitation of this property holds great potential in, e.g., soft robotics applications. For fast and optimal design, efficient numerical tools are required, capable of bridging the gap between the microstructural and engineering scale, while capturing all relevant pattern transformations. A micromorphic homogenization framework for materials exhibiting multiple pattern transformations is therefore presented in this paper, which extends the micromorphic scheme of Roko\v{s} et al., J. Mech. Phys. Solids 123, 119-137 (2019), for elastomeric metamaterials exhibiting only a single pattern transformation. The methodology is based on a suitable kinematic ansatz consisting of a smooth part, a set of spatially correlated fluctuating fields, and a remaining, spatially uncorrelated microfluctuation field. Whereas the latter field is neglected or condensed out at the level of each macroscopic material point, the magnitudes of the spatially correlated fluctuating fields emerge at the macroscale as micromorphic fields. We develop the balance equations which these micromorphic fields must satisfy as well as a computational homogenization approach to compute the generalized stresses featuring in these equations. To demonstrate the potential of the methodology, loading cases resulting in mixed modes in both space and time are studied and compared against full-scale simulations. It is shown that the proposed framework is capable of capturing the relevant phenomena, although the inherent multiplicity of solutions entails sensitivity to the initial guess.Comment: 22 pages, 13 figures, Extreme Mechanics Letters, 8 April 202

Seven Kinds of Intermediate Filament Networks in the Cytoplasm of Polarized Cells: Structure and Function

Intermediate filaments (IFs) are involved in many important physiological functions, such as the distribution of organelles, signal transduction, cell polarity and gene regulation. However, little information exists on the structure of the IF networks performing these functions. We have clarified the existence of seven kinds of IF networks in the cytoplasm of diverse polarized cells: an apex network just under the terminal web, a peripheral network lying just beneath the cell membrane, a granule-associated network surrounding a mass of secretory granules, a Golgi-associated network surrounding the Golgi apparatus, a radial network locating from the perinuclear region to the specific area of the cell membrane, a juxtanuclear network surrounding the nucleus, and an entire cytoplasmic network. In this review, we describe these seven kinds of IF networks and discuss their biological roles