Preparation of microporous films with sub nanometer pores and their characterization using stress and FTIR measurements

The authors have used a novel technique, measurement of stress isotherms in microporous thin films, as a means of characterizing porosity. The stress measurement was carried out by applying sol-gel thin films on a thin silicon substrate and monitoring the curvature of the substrate under a controlled atmosphere of various vapors. The magnitude of macroscopic bending stress developed in microporous films depends on the relative pressure and molar volume of the adsorbate and reaches a value of 180 MPa for a relative vapor pressure, P/Po = 0.001, of methanol. By using a series of molecules, and observing both the magnitude and the kinetics of stress development while changing the relative pressure, they have determined the pore size of microporous thin films. FTIR measurements were used to acquire adsorption isotherms and to compare pore emptying to stress development, about 80% of the change in stress takes place with no measurable change in the amount adsorbed. The authors show that for sol-gel films, pore diameters can be controlled in the range of 5--8 {angstrom} by ``solvent templating``

Wetting films on chemically heterogeneous substrates

Based on a microscopic density functional theory we investigate the morphology of thin liquidlike wetting films adsorbed on substrates endowed with well-defined chemical heterogeneities. As paradigmatic cases we focus on a single chemical step and on a single stripe. In view of applications in microfluidics the accuracy of guiding liquids by chemical microchannels is discussed. Finally we give a general prescription of how to investigate theoretically the wetting properties of substrates with arbitrary chemical structures.Comment: 56 pages, RevTeX, 20 Figure

The OCR carbon dating procedure in Australia: New dates from Wilinyjibari Rockshelter, southeast Kimberley, Western Australia

Dates obtained using the newly developed absolute dating technique, the OCR Carbon Dating procedure, from an Aboriginal rockshelter site in the southeast Kimberley Western Australia, have been paired with conventional radiocarbon determinations to assess its usefulness in estimating the ages of soils in Australian archaeological contexts. The OCR procedure measures the site-specific rate of biodegradation of organic carbon in soils, which under most circumstances will closely approximate the age of artefacts and cultural features contained within them. These are the first published OCR determinations from an archaeological site in the Australasian region. Close agreement between paired OCR and 14C determinations from Wilinyjibari suggest that with further confirmation, the technique may provide an independent dating method with potential applications at both pre and post-contact archaeological sites in Australia

Preparation of Microporous Films with Sub Nanometer Pores and their Characterization Using Stress and FTIR Measurements

The authors have used a novel technique, measurement of stress isotherms in microporous thin films, as a means of characterizing porosity. The stress measurement was carried out by applying sol-gel thin films on a thin silicon substrate and monitoring the curvature of the substrate under a controlled atmosphere of various vapors. The magnitude of macroscopic bending stress developed in microporous films depends on the relative pressure and molar volume of the adsorbate and reaches a value of 180 MPa for a relative vapor pressure, P/Po = 0.001, of methanol. By using a series of molecules, and observing both the magnitude and the kinetics of stress development while changing the relative pressure, they have determined the pore size of microporous thin films. FTIR measurements were used to acquire adsorption isotherms and to compare pore emptying to stress development, about 80% of the change in stress takes place with no measurable change in the amount adsorbed. The authors show that for sol-gel films, pore diameters can be controlled in the range of 5--8 {angstrom} by ``solvent templating``

Rapid Deletion-Based Subtyping System for the Manila Family of Mycobacterium tuberculosis▿

The Manila family of Mycobacterium tuberculosis is a group of clonal isolates seen throughout the Pacific Basin. Commonly used rapid molecular typing methods often leave large groups of Manila family isolates clustered together. Here we describe a simple deletion-based PCR method that improves the discrimination for Manila family isolates, with or without the use of mycobacterial interspersed repetitive-unit–variable-number tandem-repeat (MIRU-VNTR) classification, and that is both rapid and affordable. Twenty-eight Manila family isolates, classified by spoligotyping, were collected from around the Pacific Basin from 1995 to 2003 and were tested for known genomic deletions. Nine of 15 regions of difference tested were identified as potentially discriminatory, with 18 distinct patterns; of these 9, 5 were selected for optimal discrimination using 61 Manila family isolates collected from California in 2009. For this geographically limited sample, the single large cluster was reduced to 14 distinct patterns. When the isolates were tested by spoligotyping and MIRU-VNTR, the addition of deletion analysis increased the number of distinct patterns from 43 to 56. In summary, the two study groups, which together form a single group of 89 isolates by spoligotyping, were segregated into 17 subgroups by our deletion-based subtyping system

A Mound Complex in Louisiana at 5400-5500 Years Before the Present

An 11-mound site in Louisiana predates other known mound complexes with earthen enclosures in North America by 1900 years. Radiometric, luminescence, artifactual, geomorphic, and pedogenic data date the site to over 5000 calendar years before present. Evidence suggests that the site was occupied by hunter-gatherers who seasonally exploited aquatic resources and collected plant species that later became the first domesticates in eastern North America