Laser Doppler velocity simulator

A method and apparatus for inducing a Doppler frequency shift in a reference beam laser velocimeter light beam to simulate target velocity are described. The light beam is passed through a rotating refractive transparent block positioned between two reference points along the beam which results in a continuous change in the light beam optical path length between the reference points according to a known function. The velocity indicated by the laser velocimeter is compared to the known simulated velocity function for velocimeter testing and calibration

Visual alignment aid

Device consists of beam-splitter cube and two 90 deg prisms cemented together. Various components can be made as two pieces, eliminating seams, except beam-splitter diagonal

Dual-band ridged waveguide

Waveguide-in-waveguide technique involves routing two waveguides through same passageway. Smaller waveguide can be soft or silver soldered inside X-band waveguide to form single ridge guide and to propagate frequencies at C-band

The 16-foot transonic tunnel laser velocimeter system

The Langley 16-foot transonic wind tunnel is described. The system configuration, optical layout, laser color separator, optical receiver, and tunnel window are discussed

Wind tunnel studies of circulation control elliptical airfoils

Effects of blown jets on the lift and drag of cambered elliptical airfoils are described. Performance changes due to a splitter plate attached to the lower surface of an elliptical airfoil near the trailing edge with and without blowing are indicated. Lift and drag characteristics of airfoils with two blown jets are compared with airfoils with single blowing jets. Airfoil designs that vary the location of a second jet relative to a fixed jet are described

Holographic direct-vision spectroscope

Spectroscope incorporates two prisms combined with holographic grating as dispersing element. This provides high dispersion with selective undeviated wavelength. Prisms with different indices of refraction and/or angles for construction and reconstruction may be used. Also, different prisms for input and output may be used