Bleaching of sol-gel glass film with embedded gold nanoparticles by thermal poling

Gold clusters embedded in glass are expected to be hard to dissolve in the form of ions since gold is essentially a nonreactive metal. In spite of that, bleaching of Au-doped nanocomposite sol-gel glass film on a soda-lime glass substrate is demonstrated in which electric-field thermal poling is employed to effectively dissolve randomly distributed gold nanoparticles (15 nm in diameter) embedded in a low conductivity sol-gel glass film with a volume filling factor as small as 2.3%. The surface plasmon absorption band at 520 nm is suppressed in the region covered by the anodic electrode. The phenomenon is explained by the ionization of the gold nanoparticles and the redistribution of gold ions in the glass matrix due to the action of the extremely high electrostatic field locally developed during poling

Third-order nonlinear optical properties of bismuth-borate glasses measured by conventional and thermally managed eclipse Z scan

Third-order nonlinearity one order of magnitude larger than silica is measured in bismuth-borate glasses presenting a fast response (<200 fs). The results for the sign and magnitude of the nonlinearity were obtained using a combination of the eclipse Z scan with thermal nonlinearity managed Z scan, whereas the Kerr shutter technique was employed to obtain the electronic time response of the nonlinearity, all performed with 76 MHz repetition rate 150 fs pulses at 800 nm. Conventional Z scans in the picosecond regime at 532 and 1064 nm were also independently performed, yielding the values of the third-order nonlinear susceptibilities at those wavelengths. The results obtained for the femtosecond response, enhanced third-order nonlinearity of this glass (with respect to silica), place this glass system as an important tool in the development of photonics devices. Electro-optical modulators, optical switches, and frequency converters are some of the applications using second-order nonlinear properties of the Bi-glass based on the rectification model

Tunable and compact dispersion compensation of broadband THz quantum cascade laser frequency combs

Miniaturized frequency combs (FCs) can be self-generated at terahertz (THz) frequencies through four-wave mixing in the cavity of a quantum cascade laser (QCL). To date, however, stable comb operation is only observed over a small operational current range in which the bias-depended chromatic dispersion is compensated. As most dispersion compensation techniques in the THz range are not tunable, this limits the spectral coverage of the comb and the emitted output power, restricting potential applications in, for example, metrology and ultrashort THz pulse generation. Here, we demonstrate an alternative architecture that provides a tunable, lithographically independent, control of the free-running coherence properties of THz QCL FCs. This is achieved by integrating an on-chip tightly coupled mirror with the QCL cavity, providing an external cavity and hence a tunable Gires Tournois interferometer (GTI). By finely adjusting the gap between the GTI and the back-facet of an ultra-broadband, high dynamic range QCL, we attain wide dispersion compensation regions, where stable and narrow (~3 kHz linewidth) single beatnotes extend over an operation range that is significantly larger than that of dispersion-dominated bare laser cavity counterparts. Significant reduction of the phase noise is registered over the whole QCL spectral bandwidth (1.35 THz). This agile accommodation of a tunable dispersion compensator will help enable uptake of QCL-combs for metrological, spectroscopic and quantum technology−oriented applications

Voltage-assisted cooling: a new route to enhance χ(2) during thermal poling

Modifying the standard constant-voltage poling procedure significantly enhances the in-built electric field strength (and consequently χ) and leads to control of the nonlinear region evolution, both crucial parameters to integrate nonlinearity in waveguiding regions

75% Enhancement of the second order nonlinearity in twin-hole fibres through voltage assisted cooling during poling

A technique by which the second order nonlinearity of poled silica fibre is significantly increased is demonstrated. Voltage assisted cooling technique offers a significant increase in χ(2) compared to the standard thermal poling technique