5,506 research outputs found
Inferring the high velocity of landslides in Valles Marineris on Mars from morphological analysis
The flow characteristics and velocities of three landslides in Valles Marineris on Mars are investigated using detailed morphological analyses of high-resolution images and dynamical calculations based on the run-up and curvature of the landslide deposits. The morphologies of the landslides are described, especially concerning those characteristics that can provide information on the dynamics and velocity. The long runout and estimated high velocities, often exceeding 100 m/s, confirm a low basal friction experienced by these landslides. Because subaqueous landslides on Earth exhibit reduced friction, we explore the scenario of sub-lacustrine failures, but find little support to this hypothesis. The environmental conditions that better explain the low friction and the presence of longitudinal furrows suggest an aerial environment with a basal soft and naturally lubricating medium on which friction diminished gradually; in this perspective, ice is the most promising candidate
A case-crossover study of alcohol consumption, meals and the risk of road traffic crashes
<p>Abstract</p> <p>Background</p> <p>The case-crossover (CC) design has proved effective to investigate the association between alcohol use and injuries in general, but has never been applied to study alcohol use and road traffic crashes (RTCs) specifically. This study aims at investigating the association between alcohol and meal consumption and the risk of RTCs using intrapersonal comparisons of subjects while driving.</p> <p>Methods</p> <p>Drivers admitted to an Italian emergency room (ER) after RTCs in 2007 were interviewed about personal, vehicle, and crash characteristics as well as hourly patterns of driving, and alcohol and food intake in the 24 hours before the crash. The odds ratio (OR) of a RTC was estimated through a CC, matched pair interval approach. Alcohol and meal consumption 6 and 2 hours before the RTC (case exposure window) were compared with exposures in earlier control windows of analogous length.</p> <p>Results</p> <p>Of 574 patients enrolled, 326 (56.8%) reported previous driving from 6 to 18 hours before the RTC and were eligible for analysis. The ORs (mutually adjusted) were 2.25 (95%CI 1.11-4.57) for alcohol and 0.94 (0.47-1.88) for meals. OR for alcohol was already increased at low (1-2 units) doses - 2.17 (1.03-4.57) and the trend of increase for each unit was significant - 1.64 (95%CI 1.05-2.57). In drivers at fault the OR for alcohol was 21.22 (2.31-194.79). The OR estimate for meal consumption seemed to increase in case of previous sleep deprivation, 2.06 (0.25-17.00).</p> <p>Conclusion</p> <p>Each single unit of acute alcohol consumption increases the risk of RTCs, in contrast with the 'legal' threshold allowed in some countries. Meal consumption is not associated with RTCs, but its combined effects with sleepiness need further elucidation.</p
ISS mapped from ICD-9-CM by a novel freeware versus traditional coding: a comparative study
<p>Abstract</p> <p>Background</p> <p>Injury severity measures are based either on the Abbreviated Injury Scale (AIS) or the International Classification of diseases (ICD). The latter is more convenient because routinely collected by clinicians for administrative reasons. To exploit this advantage, a proprietary program that maps ICD-9-CM into AIS codes has been used for many years. Recently, a program called ICDPIC trauma and developed in the USA has become available free of charge for registered STATA<sup>® </sup>users. We compared the ICDPIC calculated Injury Severity Score (ISS) with the one from direct, prospective AIS coding by expert trauma registrars (dAIS).</p> <p>Methods</p> <p>The administrative records of the 289 major trauma cases admitted to the hospital of Udine-Italy from 1 July 2004 to 30 June 2005 and enrolled in the Italian Trauma Registry were retrieved and ICDPIC-ISS was calculated. The agreement between ICDPIC-ISS and dAIS-ISS was assessed by Cohen's Kappa and Bland-Altman charts. We then plotted the differences between the 2 scores against the ratio between the number of traumatic ICD-9-CM codes and the number of dAIS codes for each patient (DIARATIO). We also compared the absolute differences in ISS among 3 groups identified by DIARATIO. The discriminative power for survival of both scores was finally calculated by ROC curves.</p> <p>Results</p> <p>The scores matched in 33/272 patients (12.1%, k 0.07) and, when categorized, in 80/272 (22.4%, k 0.09). The Bland-Altman average difference was 6.36 (limits: minus 22.0 to plus 34.7). ICDPIC-ISS of 75 was particularly unreliable. The differences increased (p < 0.01) as DIARATIO increased indicating incomplete administrative coding as a cause of the differences. The area under the curve of ICDPIC-ISS was lower (0.63 vs. 0.76, p = 0.02).</p> <p>Conclusions</p> <p>Despite its great potential convenience, ICPIC-ISS agreed poorly with its conventionally calculated counterpart. Its discriminative power for survival was also significantly lower. Incomplete ICD-9-CM coding was a main cause of these findings. Because this quality of coding is standard in Italy and probably in other European countries, its effects on the performances of other trauma scores based on ICD administrative data deserve further research. Mapping ICD-9-CM code 862.8 to AIS of 6 is an overestimation.</p
Comparison between kinetics of autochthonous marine bacteria in activated sludge and granular sludge systems at different salinity and SRTs
Biological nutrient removal performances and kinetics of autochthonous marine biomass in forms of activated sludge and aerobic granular sludge were investigated under different salinity and sludge retention time (SRT). Both the biomasses, cultivated from a fish-canning wastewater, were subjected to stepwise increases in salinity (+2 gNaCl L−1), from 30 gNaCl L−1 up to 50 gNaCl L−1 with the aim to evaluate the maximum potential in withstanding salinity by the autochthonous marine biomass. Microbial marine species belonging to the genus of Cryomorphaceae and of Rhodobacteraceae were found dominant in both the systems at the maximum salinity tested (50 gNaCl L−1). The organic carbon was removed with a yield of approximately 98%, irrespective of the salinity. Similarly, nitrogen removal occurred via nitritation-denitritation and was not affected by salinity. The ammonium utilization rate and the nitrite utilization rate were approximately of 3.60 mgNH4-N gVSS−1h−1 and 10.0 mgNO2-N gVSS−1h−1, respectively, indicating a high activity of nitrifying and denitrifying bacteria. The granulation process did not provide significant improvements in the nutrients removal process likely due to the stepwise salinity increase strategy. Biomass activity and performances resulted affected by long SRT (27 days) due to salt accumulation within the activated sludge flocs and granules. In contrast, a lower SRT (14 days) favoured the discharge of the granules and flocs with higher inert content, thereby enhancing the biomass renewing. The obtained results demonstrated that the use of autochthonous-halophilic bacteria represents a valuable solution for the treatment of high-strength carbon and nitrogen saline wastewater in a wide range of salinity. Besides, the stepwise increase in salinity and the operation at low SRT enabled high metabolic activity and to avoid excessive accumulation of salt within the biomass aggregates, limiting their physical destructuration due to the increase in loosely-bound exopolymers
Childhood immunization coverage during the COVID-19 Pandemic in the Province of Siracusa, Italy
Introduction: The COVID-19 pandemic has severely impacted routine immunization activities and a decline in vaccination coverage has been documented around the world. The aim of this study was to assess the impact of the direct and indirect effects of the COVID-19 pandemic on routine childhood vaccination coverage in the Province of Siracusa, Italy.
Methods: We compared 2020 and 2019 vaccination coverage by age group and vaccine type. Results were considered statistically significant at a two-tailed p-value ≤0.05.
Results: Our findings show that vaccination coverage rates for mandatory and recommended vaccinations decreased in 2020 compared with the previous year (range from -1.4 % to -7.8%). Anti-rotavirus vaccination increased (+4.8%, as compared to 2019), while the reductions observed for polio vaccination (hexavalent) and human papillomavirus vaccination in males were not statistically significant. The reduction did not hit the population in the same manner, with the greater decreases observed for children aged >24 months compared to the younger (-5.5% vs. -2.2%) and for booster doses compared to the primary vaccinations (-6.4% vs. -2.6%).
Conclusions: This study found that vaccination coverage of routine childhood immunisations was negatively affected during the COVID-19 pandemic in the Province of Siracusa. It is of huge importance to put in place some catch-up programs to ensure vaccinations at the earliest of individuals who missed immunization during the pandemic
Foot Reconstruction
Since the conquest of the upright position, the foot has gained more importance as an organ that supports both the lower limb and the whole body weight and that allows humans to stand up, walk, run, jump, and climb. Human evolution determined progressive changes in both the skeleton architecture and the soft tissue of the foot to cope with the new environmental requirements. From the orangutan to the chimpanzee, from the gorilla to the human, the most important modifications of the skeleton included the progressive reduction of the distal area of the phalanxes with the loss of the grasping function and the enlargement of the proximal bones (astragalus, calcaneum) to obtain a resistant yet flexible structure. See the image below
Design of the Test Section for the Experimental Validation of Antipermeation and Corrosion Barriers for WCLL BB
Tritium permeation into the Primary Heat Transfer System (PHTS) of DEMO and ITER reactors is one of the challenging issues to be solved in order to demonstrate the feasibility of nuclear fusion power plants construction. Several technologies were investigated as antipermeation and corrosion barriers to reduce the tritium permeation flux from the breeder into the PHTS. Within this frame, alumina coating manufactured by Pulsed Laser Deposition (PLD) and Atomic Layer Deposition (ALD) are two of the main candidates for the Water Cooled Lithium Lead (WCLL) Breeder Blanket (BB). In order to validate the performance of the coatings on relevant WCLL BB geometries, a mock-up was designed and will be characterized in an experimental facility operating with flowing lithium-lead, called TRIEX-II. The present work aims to illustrate the preliminary engineering design of a WCLL BB mock-up in order to deeply investigate permeation of hydrogen isotopes through PHTS water pipes. The permeation tests are planned in the temperature range between 330 and 500 °C, with hydrogen and deuterium partial pressure in the range of 1–1000 Pa. The hydrogen isotopes transport analysis carried out for the design and integration of the mock-up in TRIEX-II facility is also shown
CFD Analysis of Urban Canopy Flows Employing the V2F Model: Impact of Different Aspect Ratios and Relative Heights
Computational fluid dynamics (CFD) is currently used in the environmental field to simulate flow and dispersion of pollutants around buildings. However, the closure assumptions of the turbulence usually employed in CFD codes are not always physically based and adequate for all the flow regimes relating to practical applications. The starting point of this work is the performance assessment of the V2F (i.e., v2¯ − f) model implemented in Ansys Fluent for simulating the flow field in an idealized array of two-dimensional canyons. The V2F model has been used in the past to predict low-speed and wall-bounded flows, but it has never been used to simulate airflows in urban street canyons. The numerical results are validated against experimental data collected in the water channel and compared with other turbulence models incorporated in Ansys Fluent (i.e., variations of both k-ε and k-ω models and the Reynolds stress model). The results show that the V2F model provides the best prediction of the flow field for two flow regimes commonly found in urban canopies. The V2F model is also employed to quantify the air-exchange rate (ACH) for a series of two-dimensional building arrangements, such as step-up and step-down configurations, having different aspect ratios and relative heights of the buildings. The results show a clear dependence of the ACH on the latter two parameters and highlight the role played by the turbulence in the exchange of air mass, particularly important for the step-down configurations, when the ventilation associated with the mean flow is generally poor
Disclosing the composition of the Renaissance thin uniface metallic strikings by Alessandro Cesati (mid-16th century) from the Bargello Museum using non-invasive analyses
This study focuses on a series of thin uniface strikings preserved in the Bargello Museum (Florence, Italy), analysed using non-destructive and non-invasive techniques. These specimens were created in Rome by Italo-Greek sixteenth-century goldsmith and medalist Alessandro Cesati, called ‘Grechetto’, for Pope Paul III (1534–1549 A.D.) and Pope Julius III (1550–1555 A.D.). The samples were studied to explore the chemical composition and the surface morphology of the alloy since they are characterized by thin metal uniface strikings, representing a truly unique case study. New information about production technique, alloy composition, and on the use of these foils as prototypes by the artist are gained thanks to the analysis of such exemplars. A scanning electron microscope with an energy dispersive system (SEM-EDS) shows that the pieces are characterized by a surface enriched in Ag (up to 48 wt%) and/or Au (up to 6.3 wt%), whereas the back side shows an Sn-Pb alloy. In this specimen, Sn reaches 59.9 wt%, and Pb is up to 64.3 wt%, displaying a typical microstructure of Pb islands dispersed in an Sn matrix. Moreover, the absence of a preferential orientation of such lead clusters implies that the medal was subjected to very soft mechanical processing, such as hammering. FTIR analysis detected the use of a resin to glue the foils onto a different substrate, suggesting that Cesati also used these strikings to produce medallic prototypes to send to friends and patrons outside Rome
A dual mode breath sampler for the collection of the end-tidal and dead space fractions
This work presents a breath sampler prototype automatically collecting end-tidal (single and multiple breaths) or dead space air fractions (multiple breaths). This result is achieved by real time measurements of the CO2 partial pressure and airflow during the expiratory and inspiratory phases. Suitable algorithms, used to control a solenoid valve, guarantee that a Nalophan® bag is filled with the selected breath fraction even if the subject under test hyperventilates. The breath sampler has low pressure drop (< 0.5 kPa) and uses inert or disposable components to avoid bacteriological risk for the patients and contamination of the breath samples. A fully customisable software interface allows a real time control of the hardware and software status. The performances of the breath sampler were evaluated by comparing a) the CO2 partial pressure calculated during the sampling with the CO2 pressure measured off-line within the Nalophan® bag; b) the concentrations of four selected volatile organic compounds in dead space, end-tidal and mixed breath fractions.Results showed negligible deviations between calculated and off-line CO2 pressure values and the distributions of the selected compounds into dead space, end-tidal and mixed breath fractions were in agreement with their chemical-physical properties
- …