Dry microfoams: Formation and flow in a confined channel

We present an experimental investigation of the agglomeration of microbubbles into a 2D microfoam and its flow in a rectangular microchannel. Using a flow-focusing method, we produce the foam in situ on a microfluidic chip for a large range of liquid fractions, down to a few percent in liquid. We can monitor the transition from separated bubbles to the desired microfoam, in which bubbles are closely packed and separated by thin films. We find that bubble formation frequency is limited by the liquid flow rate, whatever the gas pressure. The formation frequency creates a modulation of the foam flow, rapidly damped along the channel. The average foam flow rate depends non-linearly on the applied gas pressure, displaying a threshold pressure due to capillarity. Strong discontinuities in the flow rate appear when the number of bubbles in the channel width changes, reflecting the discrete nature of the foam topology. We also produce an ultra flat foam, reducing the channel height from 250 $\mu$m to 8 $\mu$m, resulting in a height to diameter ration of 0.02; we notice a marked change in bubble shape during the flow.Comment: 7 pages; 7 figures; 1 tex file+ 22 eps-file

Discrete rearranging disordered patterns, part I: Robust statistical tools in two or three dimensions

Discrete rearranging patterns include cellular patterns, for instance liquid foams, biological tissues, grains in polycrystals; assemblies of particles such as beads, granular materials, colloids, molecules, atoms; and interconnected networks. Such a pattern can be described as a list of links between neighbouring sites. Performing statistics on the links between neighbouring sites yields average quantities (hereafter "tools") as the result of direct measurements on images. These descriptive tools are flexible and suitable for various problems where quantitative measurements are required, whether in two or in three dimensions. Here, we present a coherent set of robust tools, in three steps. First, we revisit the definitions of three existing tools based on the texture matrix. Second, thanks to their more general definition, we embed these three tools in a self-consistent formalism, which includes three additional ones. Third, we show that the six tools together provide a direct correspondence between a small scale, where they quantify the discrete pattern's local distortion and rearrangements, and a large scale, where they help describe a material as a continuous medium. This enables to formulate elastic, plastic, fluid behaviours in a common, self-consistent modelling using continuous mechanics. Experiments, simulations and models can be expressed in the same language and directly compared. As an example, a companion paper (Marmottant, Raufaste and Graner, joint paper) provides an application to foam plasticity

Three-dimensional bubble clusters:Shape, packing, and growth rate

We consider three-dimensional clusters of identical bubbles packed around a central bubble and calculate their energy and optimal shape. We obtain the surface area and bubble pressures to improve on existing growth laws for three-dimensional bubble clusters. We discuss the possible number of bubbles that can be packed around a central one: the ``kissing problem'', here adapted to deformable objects

Discrete rearranging disordered patterns, part II: 2D plasticity, elasticity and flow of a foam

The plastic flow of a foam results from bubble rearrangements. We study their occurrence in experiments where a foam is forced to flow in 2D: around an obstacle; through a narrow hole; or sheared between rotating disks. We describe their orientation and frequency using a topological matrix defined in the companion paper (Graner et al., preprint), which links them with continuous plasticity at large scale. We then suggest a phenomenological equation to predict the plastic strain rate: its orientation is determined from the foam's local elastic strain; and its rate is determined from the foam's local elongation rate. We obtain a good agreement with statistical measurements. This enables us to describe the foam as a continuous medium with fluid, elastic and plastic properties. We derive its constitutive equation, then test several of its terms and predictions

Two-dimensional flow of foam around a circular obstacle: local measurements of elasticity, plasticity and flow

We investigate the two-dimensional flow of a liquid foam around circular obstacles by measuring all the local fields necessary to describe this flow: velocity, pressure, bubble deformations and rearrangements. We show how our experimental setup, a quasi-2D "liquid pool" system, is adapted to the determination of these fields: the velocity and bubble deformations are easy to measure from 2D movies, and the pressure can be measured by exploiting a specific feature of this system, a 2D effective compressibility. To describe accurately bubble rearrangements, we propose a new, tensorial descriptor. All these quantities are evaluated via an averaging procedure that we justify showing that the fluctuations of the fields are essentially random. The flow is extensively studied in a reference experimental case; the velocity presents an overshoot in the wake of the obstacle, the pressure is maximum at the leading side and minimal at the trailing side. The study of the elastic deformations and of the velocity gradients shows that the transition between plug flow and yielded regions is smooth. Our tensorial description of T1s highlight their correlation both with the bubble deformations and the velocity gradients. A salient feature of the flow, notably on the velocity and T1 repartition, is a marked asymmetry upstream/downstream, signature of the elastic behaviour of the foam. We show that the results do not change qualitatively when various control parameters vary, identifying a robust quasistatic regime. These results are discussed in the frame of the actual foam rheology literature, and we argue that they constitute a severe test for existing rheological models, since they capture both the elastic, plastic and fluid behaviour of the foam.Comment: 41 pages, 25 figures, submitted to Journal of Fluid Mechanics (but not in JFM style), short version of the abstrac

Screening in two-dimensional foams

Using the Surface Evolver software, we perform numerical simulations of point-like deformations in a two-dimensional foam. We study perturbations which are infinitesimal or finite, isotropic or anisotropic, and we either conserve or do not conserve the number of bubbles. We measure the displacement fields around the perturbation. Changes in pressure decrease exponentially with the distance to perturbation, indicating a screening over a few bubble diameters

Discrete rearranging disordered patterns: Prediction of elastic and plastic behaviour, and application to two-dimensional foams

We study the elasto-plastic behaviour of materials made of individual (discrete) objects, such as a liquid foam made of bubbles. The evolution of positions and mutual arrangements of individual objects is taken into account through statistical quantities, such as the elastic strain of the structure, the yield strain and the yield function. The past history of the sample plays no explicit role, except through its effect on these statistical quantities. They suffice to relate the discrete scale with the collective, global scale. At this global scale, the material behaves as a continuous medium; it is described with tensors such as elastic strain, stress and velocity gradient. We write the differential equations which predict their elastic and plastic behaviour in both the general case and the case of simple shear. An overshoot in the shear strain or shear stress is interpreted as a rotation of the deformed structure, which is a purely tensorial effect that exists only if the yield strain is at least of order 0.3. We suggest practical applications, including: when to choose a scalar formalism rather than a tensorial one; how to relax trapped stresses; and how to model materials with a low, or a high, yield strain