54 research outputs found
Image quality evaluation of a new high-performance ring-gantry cone-beam computed tomography imager
Objective. Newer cone-beam computed tomography (CBCT) imaging systems offer reconstruction algorithms including metal artifact reduction (MAR) and extended field-of-view (eFoV) techniques to improve image quality. In this study a new CBCT imager, the new Varian HyperSight CBCT, is compared to fan-beam CT and two CBCT imagers installed in a ring-gantry and C-arm linear accelerator, respectively. Approach. The image quality was assessed for HyperSight CBCT which uses new hardware, including a large-size flat panel detector, and improved image reconstruction algorithms. The decrease of metal artifacts was quantified (structural similarity index measure (SSIM) and root-mean-squared error (RMSE)) when applying MAR reconstruction and iterative reconstruction for a dental and spine region using a head-and-neck phantom. The geometry and CT number accuracy of the eFoV reconstruction was evaluated outside the standard field-of-view (sFoV) on a large 3D-printed chest phantom. Phantom size dependency of CT numbers was evaluated on three cylindrical phantoms of increasing diameter. Signal-to-noise and contrast-to-noise were quantified on an abdominal phantom. Main results. In phantoms with streak artifacts, MAR showed comparable results for HyperSight CBCT and CT, with MAR increasing the SSIM (0.97-0.99) and decreasing the RMSE (62-55 HU) compared to iterative reconstruction without MAR. In addition, HyperSight CBCT showed better geometrical accuracy in the eFoV than CT (Jaccard Conformity Index increase of 0.02-0.03). However, the CT number accuracy outside the sFoV was lower than for CT. The maximum CT number variation between different phantom sizes was lower for the HyperSight CBCT imager (âŒ100 HU) compared to the two other CBCT imagers (âŒ200 HU), but not fully comparable to CT (âŒ50 HU). Significance. This study demonstrated the imaging performance of the new HyperSight CBCT imager and the potential of applying this CBCT system in more advanced scenarios by comparing the quality against fan-beam CT.</p
Image quality evaluation of a new high-performance ring-gantry cone-beam computed tomography imager
Objective. Newer cone-beam computed tomography (CBCT) imaging systems offer reconstruction algorithms including metal artifact reduction (MAR) and extended field-of-view (eFoV) techniques to improve image quality. In this study a new CBCT imager, the new Varian HyperSight CBCT, is compared to fan-beam CT and two CBCT imagers installed in a ring-gantry and C-arm linear accelerator, respectively. Approach. The image quality was assessed for HyperSight CBCT which uses new hardware, including a large-size flat panel detector, and improved image reconstruction algorithms. The decrease of metal artifacts was quantified (structural similarity index measure (SSIM) and root-mean-squared error (RMSE)) when applying MAR reconstruction and iterative reconstruction for a dental and spine region using a head-and-neck phantom. The geometry and CT number accuracy of the eFoV reconstruction was evaluated outside the standard field-of-view (sFoV) on a large 3D-printed chest phantom. Phantom size dependency of CT numbers was evaluated on three cylindrical phantoms of increasing diameter. Signal-to-noise and contrast-to-noise were quantified on an abdominal phantom. Main results. In phantoms with streak artifacts, MAR showed comparable results for HyperSight CBCT and CT, with MAR increasing the SSIM (0.97-0.99) and decreasing the RMSE (62-55 HU) compared to iterative reconstruction without MAR. In addition, HyperSight CBCT showed better geometrical accuracy in the eFoV than CT (Jaccard Conformity Index increase of 0.02-0.03). However, the CT number accuracy outside the sFoV was lower than for CT. The maximum CT number variation between different phantom sizes was lower for the HyperSight CBCT imager (âŒ100 HU) compared to the two other CBCT imagers (âŒ200 HU), but not fully comparable to CT (âŒ50 HU). Significance. This study demonstrated the imaging performance of the new HyperSight CBCT imager and the potential of applying this CBCT system in more advanced scenarios by comparing the quality against fan-beam CT.</p
Long-Term Gastrocolocutaneous Fistula after Endoscopic Gastrostomy: How Concerned Should We Be?
Percutaneous endoscopic gastrostomy (PEG) is a safe technique for long-term enteral feeding. The most common PEG-associated adverse events are minor. Gastrocolocutaneous fistula (GCCF) results from misplacement of the PEG tube through the colon. The importance of this complication is not currently defined, and there is no clearly established therapeutic algorithm. The authors report a series of 3 cases of GCCF diagnosed and treated in a tertiary center. Case 1: An 88-year-old man underwent PEG due to head and neck cancer. The procedure was uneventful, and the patient remained asymptomatic. After the first PEG tube substitution performed at 6 months, stool drainage through the stoma was observed. Computed tomography (CT) showed a GCCF. After tube removal, the fistula spontaneously closed, and the patient remained under nasogastric feeding until death. Case 2: A 31-year-old man with hereditary spastic paraplegia was submitted to PEG without early complications. The patient remained asymptomatic, and 7 months later, replacement of the PEG tube was planned. Under endoscopic control, the primary tube was removed, but the balloon replacement tube, introduced through the skin, was not observed in the gastric lumen. CT displayed a GCCF that spontaneously closed after a few days. A combined laparoscopic and endoscopic approach was used to resect the fistula tracts and perform a new gastrostomy. Case 3: A 45-year-old man with cerebral palsy was referred to PEG. Skin transillumination was only observed transiently, and the abdominal puncture was performed obliquely. The patient remained asymptomatic until the 7th month, when the primary PEG tube replacement was performed. The percutaneously placed substitution tube did not reach the stomach. GCCF was evident on CT. The fistula spontaneously closed, and the patient was referred to elective surgery for laparoscopic gastrostomy. GCCF is an uncommon complication of PEG. Its clinical course seems to be benign with patients remaining asymptomatic under ambulatory enteral feeding for long periods until PEG tube replacement. Spontaneous fistula closure is the rule in this setting. Laparoscopic gastrostomy should be considered when a new PEG is advised and cannot be safely performed due to colon interposition
Effect of racial crossing on the seminal parameters of rams submitted to heat stress
The aim of this study was to evaluate the effect of racial crossing on seminal parameters of eight Santa InĂȘs and crossbred (Santa InĂȘs x Dorper) rams submitted to heat stress, and to monitor the return of these parameters to previously reported. Before to place the insulation bags, two collects of semen through electroejaculation were performed. The insulation pouches were made with double-layer plastic, internally lined with cotton, and fixed around the spermatic funiculus and scrotum with adhesive tape and bandage remaining on the testes of the animals for seven days. The first collect was performed on the day that the pouches were taken (day 0) and thereafter, every seven days, totalizing 15 measurements. Data were submitted to analysis of variance (ANOVA). The analyzed variables were subjected to Dunnett test at 5% probability to compare the values obtained before treatment with those obtained in the following days. In this study it was found that the animals restored normal seminal parameter after the insulation effects, however, the return rate differed slightly among the studied breeds. The crossbred animals restored the seminal patterns, on average, a week before Santa InĂȘs. It is concluded that the racial crossing influences the semen parameters of rams submitted to heat stress.
Keywords: motility, scrotal insulation, sperm concentration, sperm quality
Characterization of tillers in deferred Piata palisade grass with different initial heights and nitrogen levels
Global disparities in surgeonsâ workloads, academic engagement and rest periods: the on-calL shIft fOr geNEral SurgeonS (LIONESS) study
: The workload of general surgeons is multifaceted, encompassing not only surgical procedures but also a myriad of other responsibilities. From April to May 2023, we conducted a CHERRIES-compliant internet-based survey analyzing clinical practice, academic engagement, and post-on-call rest. The questionnaire featured six sections with 35 questions. Statistical analysis used Chi-square tests, ANOVA, and logistic regression (SPSSŸ v. 28). The survey received a total of 1.046 responses (65.4%). Over 78.0% of responders came from Europe, 65.1% came from a general surgery unit; 92.8% of European and 87.5% of North American respondents were involved in research, compared to 71.7% in Africa. Europe led in publishing research studies (6.6 ± 8.6 yearly). Teaching involvement was high in North America (100%) and Africa (91.7%). Surgeons reported an average of 6.7 ± 4.9 on-call shifts per month, with European and North American surgeons experiencing 6.5 ± 4.9 and 7.8 ± 4.1 on-calls monthly, respectively. African surgeons had the highest on-call frequency (8.7 ± 6.1). Post-on-call, only 35.1% of respondents received a day off. Europeans were most likely (40%) to have a day off, while African surgeons were least likely (6.7%). On the adjusted multivariable analysis HDI (Human Development Index) (aOR 1.993) hospital capacity > 400 beds (aOR 2.423), working in a specialty surgery unit (aOR 2.087), and making the on-call in-house (aOR 5.446), significantly predicted the likelihood of having a day off after an on-call shift. Our study revealed critical insights into the disparities in workload, access to research, and professional opportunities for surgeons across different continents, underscored by the HDI
Omecamtiv mecarbil in chronic heart failure with reduced ejection fraction, GALACTICâHF: baseline characteristics and comparison with contemporary clinical trials
Aims:
The safety and efficacy of the novel selective cardiac myosin activator, omecamtiv mecarbil, in patients with heart failure with reduced ejection fraction (HFrEF) is tested in the Global Approach to Lowering Adverse Cardiac outcomes Through Improving Contractility in Heart Failure (GALACTICâHF) trial. Here we describe the baseline characteristics of participants in GALACTICâHF and how these compare with other contemporary trials.
Methods and Results:
Adults with established HFrEF, New York Heart Association functional class (NYHA)ââ„âII, EF â€35%, elevated natriuretic peptides and either current hospitalization for HF or history of hospitalization/ emergency department visit for HF within a year were randomized to either placebo or omecamtiv mecarbil (pharmacokineticâguided dosing: 25, 37.5 or 50âmg bid). 8256 patients [male (79%), nonâwhite (22%), mean age 65âyears] were enrolled with a mean EF 27%, ischemic etiology in 54%, NYHA II 53% and III/IV 47%, and median NTâproBNP 1971âpg/mL. HF therapies at baseline were among the most effectively employed in contemporary HF trials. GALACTICâHF randomized patients representative of recent HF registries and trials with substantial numbers of patients also having characteristics understudied in previous trials including more from North America (n = 1386), enrolled as inpatients (n = 2084), systolic blood pressureâ<â100âmmHg (n = 1127), estimated glomerular filtration rate <â30âmL/min/1.73 m2 (n = 528), and treated with sacubitrilâvalsartan at baseline (n = 1594).
Conclusions:
GALACTICâHF enrolled a wellâtreated, highârisk population from both inpatient and outpatient settings, which will provide a definitive evaluation of the efficacy and safety of this novel therapy, as well as informing its potential future implementation
Project and construction of energy degrading and scattering plates for electron beam radiotherapy for skin diseases
HĂĄ diversas enfermidades radiossensĂveis epidermotrĂłpicas, como a micose fungĂłide e a sĂndrome de SĂ©zary, neoplasias cutĂąneas originadas de linfĂłcitos do tipo T, que apresentam grande possibilidade de erradicação quando tratadas com feixes de elĂ©trons com energia entre 4 e 10 MeV, conforme apontam diversos estudos. No entanto, esta tĂ©cnica de tratamento apresenta inĂșmeras dificuldades prĂĄticas, pois a doença dissemina-se por todo o corpo do paciente tornando necessĂĄrio um grande campo de radiação e deposição de energia limitada Ă profundidade da pele. A fim de obter uma distribuição de dose uniforme, muitas tĂ©cnicas jĂĄ foram desenvolvidas. Com base em estudos anteriores e guiados pelo protocolo n. 23 da American Association of Physicists in Medicine (AAPM), o presente trabalho desenvolveu placas espalhadoras e degradadoras de energia e realizou toda a dosimetria (computacional e experimental), a fim de fornecer subsĂdios para a implementação da tĂ©cnica de tratamento Total Skin Electron Therapy (TSET) no Serviço de Radioterapia do Hospital das ClĂnicas de SĂŁo Paulo. O programa MCNP4C baseado no mĂ©todo de Monte Carlo foi utilizado para reconstruir o espectro energĂ©tico do acelerador Varian Clinac 2100C, por meio de medidas experimentais de percentual de dose em profundidade (PDP) e perfis radiais de dose. Com estes dados, foi possĂvel efetuar simulaçÔes computacionais para a seleção de materiais, mediante anĂĄlise da distribuição radial e axial de dose, produção de raios-X e a atenuação do feixe, alĂ©m da simulação de placas espalhadoras e degradadoras de energia, a serem posicionadas na saĂda do acelerador. Os resultados das simulaçÔes foram validados por meio de medidas experimentais a fim de obter um grande campo de radiação com 200 cm x 80 cm que atendesse as especificaçÔes do protocolo da AAPM.There are many radiosensitive epidermotropics diseases such as mycosis fungoids and the syndrome of SĂ©zary, coetaneous neoplasics originated from type T lymphocytes. Several studies indicate the eradication of the disease when treated with linear accelerators emitting electron beams with energies between 4 to 10 MeV. However, this treatment technique presents innumerable technical challenges since the disease in general reaches all patientÂŽs body, becoming necessary not only a very large field size radiation beam, but also deliver superficial doses limited to the skin depth. To reach the uniformity in the dose distribution, many techniques had already been developed. Based on these previous studies and guided by the report n. 23 of the American Association of Physicists in Medi-cine (AAPM), the present study developed an energy scattering and degrading plates and made dosimetry (computational and experimental), supplying subsidies for a future installation of Total Skin Electron Therapy (TSET) at the Serviço de Radioterapia do Hospital das ClĂnicas de SĂŁo Paulo. As part of the plates design, first of all, the energy spectrum of the 6 MeV electron beam of the VARIAN 2100C accelerator was reconstructed through Monte Carlo simulations using the MCNP4C code and based on experimental data. Once the spectrum is built, several materials were analyzed for the plates design based on radial and axial dose distribution, production of rays-x and dose attenuation. The simulation results were validated by experimental measurements in order to obtain a large field of radiation with 200 cm x 80 cm that meets the specifications of the AAPM protocol
- âŠ